SPRAYEZ-3000 Polyurethane Proportioner User Manual
SKIN INJECTION HAZARD
High-pressure fluid from gun, hose leak, or ruptured components will
pierce skin. This may look like just a cut, but it is a serious injury that
can result in amputation. Get immediate treatment.
•
Engage raw material valve lock when notspraying.
•
Do not point gun at anyone or at any part of the body.
•
Do not put your hand over the spray tip.
•
Do not stop or deflect leaks with your hand, body, glove, or
rag.
•
Turn off the machine when you stop spraying and before
cleaning, checking, or servicing equipment.
•
Tighten all fluid connections before operating theequipment.
•
Check hoses and couplings daily. Replace worn or damaged
parts immediately.
FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can
ignite or explode. To help prevent fire and explosion:
•
Use equipment in well ventilated only.
•
Eliminate all ignition sources; such as pilot lights, cigarettes;
plastic drop cloths, and portable electriclamps.
•
Keep work area free of debris, including solvent, rags and
gasoline.
•
Do not plug or unplug power cords, or turn power or light switch
on or off when flammable fume arepresent.
•
Ground all equipment in the workarea.
•
Hold gun firmly to side of grounded pail when triggering into
pail.
•
If there is a static sparking or you feel a shock, stop operation
immediately. Do not use equipment until you identify and correct
the problem.
•
Keep a working fire extinguisher in the workarea.
THERMAL EXPANSION HAZARD
Fluid subjected to heat in confined spaces, including hoses, can creat
a rapid rise in pressure due to the thermal expansion. Over-
pressurization can result in equipment rupture and serious injury.
•
Open a valve relieves the fluid expansion duringheating.
•
Replace hosed proactively at regular intervals based on your
operation conditions.
