Splendide WD2100XC Guía de configuración
WD2100XC / XCP (Splendide 2100XC)
WDC7100XCP (Splendide 7100XC)
Splendide®
Front-Loading Automatic Washer-Dryer
Training Guide
Part No. TRAINMANXC
TRAINING GUIDE
TECHNICAL EDUCATION
GROUP PRESENTS
Westland Sales, SplendideTech Dept.
1-800-356-0766 EXT. 5
(503-655-2563)
Westland Sales, SplendideTech Dept.
1-800-356-0766 EXT. 5
(503-655-2563)
Westland Sales, SplendideTech Dept.
1-800-356-0766 EXT. 5
(503-655-2563)
15650 SE 102nd Ave.
(PO BOX 427)
Clackamas, OR 97015
Telephone: 800-356-0766 (503-655-2563)
Service Fax: (503) 722-9202
Contact Info
Product Specifications & Warranty Info
Technical Assistance & Parts Ordering
Literature Orders
www.splendide.com/support.htm
Corporate Headquarters
i
Introduction
Westland Sales assumes no responsibility for repairs on Splendide products by anyone other
than Authorized Splendide Service Technicians. Warranty repairs must be pre-approved by Splen-
dide. ContactWestland Sales, before servicing any Splendide appliance.
ThisTraining Guide for the“Splendide Front-Loading AutomaticWasher-Dryer,”(Part No.TRAINMANXC),
provides the service technician with information on the installation and service of Splendide washer-
dryer modelsWD2100XC andWDC7100XC. It is to be used as a supplemental training aid for service
technicians. For more information on the washer-dryer, refer to the“Use and Care Guide”provided with
the appliance.
Training Guide Goals
The goal of thisTraining Guide is to provide information that will enable the service technician to prop-
erly diagnose malfunctions and repair the Splendide Front-Loading AutomaticWasher-Dryer.
The objectives of thisTraining Guide are for the service technician to:
• understand and follow proper safety precautions,
• effectively troubleshoot and diagnose malfunctions,
• successfully perform necessary repairs, and
• help the technician to quickly return the washer-dryer to its proper operational status
© Copyright 2004, Westland Sales, Clackamas, OR 97015
Splendide®
ii
iii
1. General Information 1
Model / Serial Number Designators 1
Warranty Guide 2
Washer-Dryer Specifications 3
IMPORTANT General Safety Information 4
2. Installation Information 5
Installation Requirements 5
Installation Instructions 9
3. Theory of Operation 13
Introduction to the Models 13
Water System 13
Wash/Dry System 15
Door Lock / Switch Assembly 17
Suspension System 17
Customer Interface / Cycle Selection System 18
Automatic Routines 24
4. Accessing the Components 27
Component Locations 27
Top Panel / Control Panel Knobs 28
Control Panel Board / Control Panel 29
Door / Door Switch / Porthole Diaphragm 30
Detergent Dispenser Assembly /WaterValves 31
Pressure Switch 32
Fan Motor / NTC Sensor / Heater Coil 33
Removing the Heater Coil 34
Lower Panel / Drain Pump / Pump Filter 35
To Clean Out the Large Item Filter 36
Back Panel / Main Motor / Module Board 37
Shock Absorbers 38
Contents
(Continued on the next page)
iv
5. Component Testing Procedures 39
Connector Locations on the Module Board 39
Introduction / Instructions 40
1. Door SwitchTest 41
2. Power“in”from the Surge ProtectorTest 42
3. Pressure SwitchTest 43
4. Heating ElementTest 44
5. Main MotorTest (Includes Running the Main Motor with AC Voltage) 45
6. Fan Motor /Water PumpTest 46
7.WaterValve /Wash NTC Test 47
8. Control Panel BoardTest 48
9. Dry NTC SensorTest 49
6. Diagnosis & Troubleshooting 50
Introduction 50
Explanation of Fault Codes 51
Fault Code /Testing Procedure Chart 52
Problem /Testing Procedure Chart 54
7. Tech Tips 56
Manually Unlocking the Door 56
Performing a Dryer Airflow & HeatTest 56
Winterization Instructions / Optional RVWinterization 57
Verifying Normal Operation 58
8. Wiring Diagrams 59-61
General Information
YEAR OF MANUFACTURE
MONTH OF MANUFACTURE
DAY OF MANUFACTURE
PRODUCT SEQUENCE NUMBER
S/N 7 07 14 3277
PRODUCT GROUP
WD = Washer-Dryer
PRODUCT IDENTIFICATION
C = Condenser Drying System (Ventless model)
PRODUCT CODE
PRODUCT COLOR Arctic White if not noted (P = Platinum)
Model Number
Serial Number
WD C 7100XC p
General Information
Use these numbers to obtain the Warranty status as well as a history of repairs and service calls for the washer-dryer.
To speed the repair process, ALWAYS have the Model and Serial No. ready when you call Westland Sales.
Model / Serial No. Designators
Model Number
Serial Number
General Information
Wty Length Splendide Will Pay For Splendide WILL NOT Pay For
MFR 1-YEAR
From Date of
Purchase
Replacement parts ONLY.
A. Repairs when the washer-dryer is used in other
than normal, single-family use.
B. Pickup and delivery.The washer-dryer is
designed to be repaired on-site.
C. Removal/replacement of washer-dryer from
built-in or cabinet installations.
D. Damage to the washer-dryer caused by
accident, alterations, misuse, abuse, fire, flood,
acts of God, or use of products not approved by
Splendide.
E. Repairs to parts or systems resulting from
unauthorized modifications made to the
washer-dryer.
F. Replacement parts or repair labor costs not
pre-approved by Splendide and/or provided by
an unauthorized service company.
G. Service calls to correct the installation of the
washer or to instruct you how to use it.
H. Plastic parts and cosmetic pieces.*
LIMITED 1-YEAR**
From Date of
Purchase
(Not available for some models)
For 1 year from the date of purchaseWHEN product
is registered. Limited replacement parts and repair
labor costs.
LIMITED 2-YEAR**
From Date of
Purchase
(Not available for some models)
For two years from the date of purchaseWHEN
extended Protection Plan is purchased. Limited
replacement parts and repair labor costs.
LIMITED 5-YEAR **
From Date of
Purchase
(Not available for some models)
For five years from the date of purchaseWHEN
extended Protection Plan is purchased.
*IMPORTANT!
This chart should be used ONLY as a guide and DOES
NOT supersede the Warranty Statement. For complete
information, refer to the Warranty Statement that came with
the appliance.
** Coverage starts 60 days after warranty registration or warranty registration with full payment is
received by Westland Sales.
Refer to this page for a brief summary of the Product Warranties available by Splendide.
Warranty Guide*
General Information
Model Number WD2100XC /WD2100XCP WDC7100XCP
COLOR White Platinum
DRYER TYPE Vented Ventless
ELECTRICAL REQ.
Max. Current 11A 11A
Rated Current 15 A 15 A
Voltage 120V 120V
Frequency 60Hz 60Hz
Heating Power 1300W 1300W
GALLONS WATER PER ‘Regular Cotton
Heavy Duty’cycle*
7.5 Gal. 7.5 Gal.
MAX. LOAD CAPACITY
Wash 15 lb. 15 lb.
Dry 11 lb. 11 lb.
MAX. SPIN SPEED 1200 RPM 1200 RPM
Height 33 1/4” 33 1/4”
Width 23 1/2” 23 1/2”
Depth 22 3/16” 22 3/16”
WEIGHT 148 lb. 148 lb.
PROGRAMS
Wash 9 Cycles 9 Cycles
Dry 3 Cycles 3 Cycles
WASH TEMP OPTIONS 77
SPECIAL WASH OPTIONS 4 buttons 4 buttons
*Avg. wash water use is 7.5-16 gal/wash load. Water usage varies depending on load size and fabric type.
NOTE: WDC7100XC has a condenser (ventless) drying system. This condenser drying system uses 2.5
gallons of cold water per hour during the dry cycle.
The following is a list of product specifications for the Splendide Models covered in this Training Guide.
Washer-Dryer Specifications
General Information
Important safety messages can be found in this manual and on
the appliance. Always read and obey all safety messages.
This is a safety alert symbol.This symbol
alerts you to potential hazards that can kill or
hurt you and others. All safety messages will
follow the safety alert symbol and the word
“WARNING.”
The safety messages will tell you what the potential hazard is,
tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
!
ELECTRICAL SHOCK HAZARD
Plug washer-dryer into a
grounded 3 prong outlet.
Do not remove ground prong.
Do not use adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
WARNING
!
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death
or electrical shock.
WARNING
!
EXCESSIVE WEIGHT HAZARD
Use two or more people to move
and install the washer-dryer.
Failure to do so can result in back
or other injury
WARNING
!
Electrostatic Discharge (ESD)
Sensitive Electronics
ESD problems are present everywhere. ESD may damage or
weaken the electronic control assembly.The new control assembly
may appear to work well after repair is finished, but failure may
occur at a later date due to ESD stress.
• Use an antistatic wrist strap. Connect the wrist strap to a green
ground connection point or unpainted metal in the appliance;
or touch your finger repeatedly to a green ground connection
point or unpainted metal in the appliance.
• Avoid touching electronic parts or terminal contacts. Handle
the Module Board by the plastic housing ONLY.
Your safety is important. Read this section before you continue.
IMPORTANT General Safety Information
Otros manuales para WD2100XC
1
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Lavadora secadora de Splendide
Splendide
Splendide WDC5200 Manual de usuario
Splendide
Splendide Ariston AS66VX Manual de usuario
Splendide
Splendide WFL 1300XD Manual de usuario
Splendide
Splendide 2000S Manual de usuario
Splendide
Splendide WDC7200XCD Manual de usuario
Splendide
Splendide WDC6200CEE Manual de usuario
Splendide
Splendide WDV2200XCD Manual de usuario
Splendide
Splendide WDC1025MCEE Manual de usuario
Splendide
Splendide WD802M Manual de usuario
Splendide
Splendide WDC1025MCEE Manual de usuario
Splendide
Splendide Comb-o-matic 6200 Manual de usuario
Splendide
Splendide WD802M Guía de configuración
Splendide
Splendide WDC7100XC Guía del usuario
Splendide
Splendide WD2000S Manual de usuario
Splendide
Splendide WD802M Manual de usuario
Splendide
Splendide WD2100 Manual de usuario
Splendide
Splendide WDC7100XC Guía del usuario
Splendide
Splendide WD2000S Guía de configuración
Splendide
Splendide 7100XC Manual de usuario
Splendide
Splendide C6200CEE Manual de usuario
