Spirit XT 600 Manual de usuario

PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE

OPERATING YOUR NEW TREADMILL!

OWNER’S MANUAL

XT200. / XT 600 / XT 800

Product Registration…………………………………………………………………………. 2

Important Safety Instructions…………………………………………………………………3

Important Electrical Information………………………………………………………………4

Important Operation Instructions……………………………………………………………..5

Assembly instructions………………………………………………………………………….6

Folding & Transport Instructions…………..………………………………………………….12

Operation of Your New Treadmill…………………………………………………………….13

Programmable Features……………………………………………………………………….16

Target Heart Rate………………………………………………………………………………18

Using a Heart Rate Transmitter……………………………………………………………….19

Heart Rate Control Operation………………………………………………………………… 20

General Maintenance.……………….………………………………………………………….21

Service Checklist - Diagnosis Guide…………………………………………………………. 23

Manufacturer’s Limited Warranty………………………………………………………………24

Table of Contents

ATTENTION-

THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE

ONLY AND IS WARRWNTED FOR THAT APPLICATION. ANY OTHER

APPLICATION VOIDS THIS WARRANTY IN ITS ENTIRETY.

XT200. / XT 600 / XT 800

Thank you for your purchase of this quality treadmill from Spirit Manufacturing,

Inc. Your new treadmill was manufactured by one of the leading fitness

manufacturers in the world and is backed by one of the most comprehensive

warranties available. Through your dealer, Spirit will do all we can to make your

ownership experience as pleasant as possible for many years to come. The local

dealership where you purchased this treadmill is your administrator for all Spirit

warranty and service needs. Their responsibility is to provide you with the

technical knowledge and service personnel to make your experience more

informed and any difficulties easier to remedy.

Please take a moment at this time to record the name of the dealer, their

telephone number, and the date of purchase below to make any future, needed

contact easy. We appreciate your support and we will always remember that you

are the reason that we are in business. Please complete and mail your

registration card today and enjoy your new treadmill.

Yours in Health,

Spirit Manufacturing, Inc.

Name of Dealer______________________________________

Telephone Number of Dealer___________________________

Purchase Date_______________________________________

RECORD YOUR SERIAL NUMBER

Please record the Serial Number of this fitness product in the space provided below.

Serial Number_______________________________________

The self-addressed product registration card must be completed in full and returned to

Spirit Manufacturing, Inc.

CONGRATULATIONS ON YOUR

NEW TREADMILL AND WELCOME

TO THE SPIRIT FAMILY!

Product Registration

XT200. / XT 600 / XT 800

WARNING - Read all instructions before using this appliance.

DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill

from the electrical outlet prior to cleaning and/or service work.

WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons,

install the treadmill on a flat level surface with access to a 120-volt, 20-amp

grounded outlet.

DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE

GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY WAY MODIFY

THE CORD SET. A serious shock or fire hazard may result along with computer

malfunctions. See Grounding Instructions, page 3.

■Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both

carpet and treadmill may result.

■Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance

between the rear of the treadmill and any fixed object.

■Keep children away from the treadmill. There are obvious pinch points and other

caution areas that can cause harm.

■ Keep hands away from all moving parts.

■Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not

working properly, call your dealer.

■ Keep the cord away from heated surfaces.

■Do not operate where aerosol spray products are being used or where oxygen is

being administered. Sparks from the motor may ignite a highly gaseous

environment.

■ Never drop or insert any object into any openings.

■Do not use outdoors.

■To disconnect, turn all controls to the off position, remove tether cord, then remove

the plug from the outlet.

■Do not attempt to use your treadmill for any purpose other than for the purpose it is

intended.

■The pulse sensors are not medical devices. Various factors, including the user’s

movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

■ Use handrails provided; they are for your safety.

■Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable

for use on your treadmill. Quality athletic shoes are recommended to avoid leg

Important Safety Instructions

XT200. / XT 600 / XT 800

fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

WARNING!

●

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.

Route the power cord away from any moving part of the treadmill including the elevation

mechanism and transport wheels.

●

NEVER remove any cover without first disconnecting AC power.

●

If voltage varies by ten percent (10%) or more, the performance of your treadmill may

be affected. Such conditions are not covered under your warranty. If you suspect

the voltage is low, contact your local power company or a licensed electrician for proper

testing. See Diagnosis Guide, page 27.

●

NEVER expose this treadmill to rain or moisture. This product is NOT designed for

use outdoors, near a pool or spa, or in any other high humidity environment.

This product must be grounded. If the treadmill should malfunction or breakdown,

grounding provides a path of least resistance for electric current, reducing the risk of

electric shock. This product is equipped with a cord having an equipment-grounding

plug. The plug must be plugged into an appropriate outlet that is properly installed and

grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result

in a risk of electric shock. Check with a qualified electrician or serviceman if you

are in doubt as to whether the product is properly grounded. Do not modify the

plug provided with the product if it will not fit the outlet, have a proper outlet

installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks

like the plug illustrated below. A temporary adapter that looks like the adapter illustrated

below may be used to connect this plug to a 2-pole receptacle as shown below if a

properly grounded outlet is not available. The temporary adapter should be used only

until a properly grounded outlet (below) can be installed by a qualified electrician. The

green colored rigid ear-lug, or the like, extending from the adapter, must be connected

to a permanent ground such as a properly grounded outlet box cover. Whenever the

adapter is used, it must be held in place by a metal screw.

Important Electrical Information

Grounding Instructions

Grounded Outlet

Grounding Pin

Grounded Outlet Box

Metal Screw

Adapter

Tab of

Grounding

Screw

XT200. / XT 600 / XT 800

●

NEVER operate this treadmill without reading and completely understanding the

results of any operational change you request from the computer.

●

Understand that changes in speed and incline do not occur immediately. Set your

desired speed on the computer console and release the adjustment key. The

computer will obey the command gradually.

●

NEVER use your treadmill during an electrical storm. Surges may occur in your

household power supply that could damage treadmill components.

●

Use caution while participating in other activities while walking on your treadmill; such

as watching television, reading, etc. These distractions may cause you to lose

balance or stray from walking in the center of the belt; which may result in serious

injury.

●

NEVER mount or dismount the treadmill while the belt is moving. Spirit treadmills

start with at a very low speed and it is unnecessary to straddle the belt during start up.

Simply standing on the belt during slow acceleration is proper after you have learned

to operate the unit.

●

Always hold on to a handrail or hand bar while making control changes (incline,

speed, etc.).

Do not use excessive pressure on console control keys. They are precision set to

function properly with little finger pressure. Pushing harder is not going to make the unit

go faster or slower. If you feel the buttons are not functioning properly with normal

pressure contact your Spirit dealer.

A safety tether cord is provided with this unit. It is a simple magnetic design that should

be used at all times. It is for your safety should you fall or move too far back on the

tread-belt.

Pulling this safety tether cord will stop tread-belt movement.

To Use:

1. Place the magnet into position on the round metal portion of the console control head.

Your treadmill will not start and operate without this. Removing the magnet also

secures the treadmill from unauthorized use.

2. Fasten the plastic clip onto your clothing securely to assure good holding power.

Note: The magnet has strong enough power to minimize accidental, unexpected

stopping. The clip should be attached securely to make certain it does not come off. Be

familiar with its function and limitations. The treadmill will stop, depending on speed,

with a one to two step coast anytime the magnet is pulled off the console. Use the red

Stop / Pause switch in normal operation.

Safety Tether Cord

XT200. / XT 600 / XT 800

Assembly Instructions (XT200 / XT600)

XT200. / XT 600 / XT 800

ASSEMBLY PACK CHECK LIST (XT200 /XT600)

(8 pcs) 5/16" x 15m/m Button Head Socket Screw

(4 pcs) 5/16" x 2" Button Head Socket Screw

(4 pcs) 8 x 23 x 1.5T Curve Washer

(2 pcs) 5/16" x 2-3/4" Button Head Socket Screw

(2 pcs) 5/16" x 1-1/2" Button Head Socket Screw

(4 pcs) 8 x 23 x 1.5T Flat Washer

(6 pcs) 3.5x38 m/m Self Tapping Screw

(1pc) Safety Key

(1 pc) Deck / Belt Lubricant

(1 pc) Combination M5 Allen Wrench & Screwdriver

(1 pc) M6 Allen Wrench

Assembly (XT200 /XT600)

Unpack the treadmill and locate the hardware pack. The hardware pack is separated into:

one section containing tools and four sections labeled steps 1-4 which contain the hardware

needed for assembly of each step. The assembly steps below are numbered one through

four and correspond to the hardware in the numbered sections of the hardware pack.

Remove only the hardware for the step you are currently assembling to avoid confusion and

mix-ups.

STEP 1

1. Take the Left and Right upright tubes and slip the upright covers onto the tubes

(observe the cover orientation is correct). Connect the Middle Console Cable that

exits from the bottom of the right upright tube with the lower Console Cable. Install

the Left and Right (L & R) Uprights into the Left and Right Receiving Tubes. Be

careful not to pinch the wire when installing the upright.

2. Install and hand tighten the 2pcs of 3/8” x 2” Button Head Socket Screw and 2pcs of

3/8” split washer into the top hole on the sides of the L & R tubes. Then install and

hand tighten the 6pcs of 5/16”x 5/8” Button Head Socket Screw in the remaining

holes on the sides and front of the L & R tubes. Do not tighten these screws until

assembly is complete.

XT200. / XT 600 / XT 800

STEP 2

1. Mount the L&R Handle bars onto Handle bar mounting plates at the top of the

upright tubes with 4pcs of 5/16” x 2” Button Head Socket Screw and 4pcs of curved

washer. NOTE: The L&R handle bars are different. The Right handle bar has

two wires and the switches on the handle bar say “Fast and Slow” while the

Left handle bar switch says “Up and Down”.

STEP 3

1.Install the L & R inside console end caps onto the ends of the 1-1/4” X 2-3/8”

console mounting tube. Ensure the end caps are oriented correctly and facing the

correct direction (see diagram). Also ensure that the wiring is fed through the end

caps.

2. Place the console onto the L & R mounting brackets at the top of the upright tubes.

Then install and hand tighten the 2 pcs. of 5/16” x 2-3/4” Hex Head Screw and flat

washers through the hole in the top of the 1-1/4” X 2-3/8” console mounting tube and

the 2 pcs. Of 5/16” x 1-1/2” Button Head Socket Screw and flat washers through the

hole in the front of the 1-1/4” X 2-3/8” console mounting tube.

3. Connect all of the connectors from the console to the mating connectors at the top of

the upright tubes. There should be three connectors on the right side and one

connector on the left side.

4. Install the outside pieces of the console end caps with 6pcs of 3.5mm x 25mm

Phillips head Screw. (Be careful, don’t cut the wires.)

STEP 4

1. Tighten all the screws securely from the previous steps.

2. The mounting screws for the Upright covers are screwed into the base of the

treadmill. You must remove these first. Install the 6pcs of 3.5mm x 25mm Phillips

head Screw into the upright covers.

Otros manuales para XT 600

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Rueda de andar de Spirit

Spirit

Spirit XT685 Manual de usuario

Spirit

Spirit F7600 Manual de instrucciones

Spirit

Spirit XT685 Manual de usuario

Spirit

Spirit XT375 Manual de usuario

Spirit

Spirit XT385 Manual de usuario

Spirit

Spirit XT285 Manual de usuario

Spirit

Spirit XT 9 Manual de usuario

Spirit

Spirit XT175 Manual de usuario

Spirit

Spirit XT685 Manual de usuario

Spirit

Spirit CT900 Manual de usuario

Spirit

Spirit CT850 ENT Manual de usuario

Spirit

Spirit XT8 Manual de usuario

Spirit

Spirit Z100 Manual de usuario

Spirit

Spirit CT850 Manual de usuario

Spirit

Spirit Treadmill Manual de usuario

Spirit

Spirit Esprit CT90 Manual de usuario

Spirit

Spirit XT485 Manual de usuario

Spirit

Spirit XT10 Manual de usuario

Spirit

Spirit 1611800-1 Manual de usuario

Spirit

Spirit CT 900 TFT Manual de usuario

Spirit

Spirit XT185 Manual de usuario

Spirit

Spirit XT385 Manual de usuario

Spirit

Spirit inspire IN300T Manual de usuario

Spirit

Spirit XT385 Manual de usuario

Manuales populares de Rueda de andar de otras marcas

Treadly

Treadly TREADLY 2 Manual de usuario

HEALTH ONE

HEALTH ONE Walk Ro Manual de usuario

NordicTrack

NordicTrack NTL12941 Manual de usuario

NordicTrack

NordicTrack T7.5 S Manual de usuario

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Manual de usuario

Merax

Merax MS282992 Manual de usuario

FYTTER

FYTTER RU-2SX Manual de usuario

Precor

Precor 903 Manual de usuario

FitLogic

FitLogic freewill d225 Manual de usuario

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Manual de usuario

Horizon Fitness

Horizon Fitness Adventure 5 Plus Manual de usuario

Stamia

Stamia InMotion II Manual de usuario

Smooth Fitness

Smooth Fitness EVO 3i Manual de usuario

NordicTrack

NordicTrack NETL81810.0 Manual de usuario

Schwinn

Schwinn 830/Journey 8.0 Manual de usuario

Keys Fitness

Keys Fitness HealthTrainer HT-740T Manual de usuario

NordicTrack

NordicTrack T 14.0 Treadmill Manual de usuario

Master

Master F22 Manual de usuario