6-00 DGP01448AAA
GSS7725 Interference Generator User Manual
© Spirent Communications plc 2002-2017
1-1
General
Contents
CHAPTER 1: GENERAL 1-3
1.1 This issue 1-3
1.2 Referenced documents 1-3
1.3 Copyright notices 1-3
1.4 Document format 1-4
1.5 Safety 1-4
CHAPTER 2: OVERVIEW 2-1
2.1 Technical Performance 2-1
2.2 Connectivity 2-1
2.3 Environmental & Safety 2-2
2.4 Operating parameters 2-2
2.5 Test Waveforms 2-3
CHAPTER 3: INTRODUCTION 3-1
3.1 Phases of operation 3-1
3.2 Nomenclature 3-1
CHAPTER 4: HARDWARE CONFIGURATION 4-1
4.1 External reference 4-1
4.2 Connectivity 4-1
4.3 GSS6300Mi 4-1
4.4 GSS6700 4-2
4.5 GSS7000 4-2
4.6 GSS9000 4-3
4.7 Power on sequence 4-3
4.8 Firewall Rules 4-3
CHAPTER 5: SCENARIO DEFINITION 5-1
5.1 Signal types 5-1
5.2 Use File 5-2
Interference Simulation File editor 5-3
Using the Interference Simulation File editor 5-4
5.3 Interactive mode 5-4
5.4 Interference commands 5-5
Comment 5-5
Interference Custom Waveform 7725 5-5
Interferer RF on/off 5-7
Interferer Level 5-8
Interferer Delta level 5-9
Operating mode with a User actions file and an interference file 5-9
5.5 Remote control interference commands 5-10
CHAPTER 6: INDEPENDENT REMOTE CONTROL 6-1
6.1 Configuration file 6-1
6.2 GSS7725 controller 6-1
6.3 Connecting to the controller 6-1
6.4 Remote command syntax 6-2
6.5 Remote commands 6-2
CHAPTER 7: CALIBRATION 7-1
7.1 Equipment required 7-1
7.2 Testing the output level 7-1
7.3 Calibrating the output level 7-2
TERMS & ABBREVIATIONS A-1
A.1 Simulator terms A-1
