9
For example the “Navigation”preset can be used to control the TV guide. In total 7 buttons need to
be programmed into SPIN remote for this function. The buttons can be grouped as follows:
-Short press the segments a, b, c, d, e for the navigation arrows and for the OK button.
-Long press the segments a & e for the “Guide” button and the “Exit” button.
How do I setup the touchpad?
By selecting one of the presets, the App will guide you through the setup process to learn the
infrared commands step by step. For the preset “Navigation” there are 7 steps in total to learn all the
required commands:
1. Select the profile that you want to use for the navigation function
2. Click on the icon “touchpad”
3. Click on the icon “IR remote”
4. Select the “Navigation”preset (click on the blue arrow to the right when you want to select
another preset like “Power” or “Custom”)
5. Click on the button “Select”
6. The active segment of the touchpad is now indicated in red. Press “record” and aim your
remote control at SPIN remote (distance of <15 cm) and press the requested button until
SPIN remote colors green
7. Continue with the process until all the buttons are programmed
At the end of the process you can also choose to customize the settings by selecting “Customize”.
