Rev. 2.25 Manual HA06 Hot Air / Quartz Reflow Oven June 2018
©Spidé, the Netherlands Page 2
IMPORTANT SAFETY RULES FORCED AIR CONVECTION OVEN
Risk of fire and burning:
When the oven is in production mode it is dangerous to leave the oven unattended, high
temperature and long producing times can be overheat the oven what can lead to
fire. When you place in - or take out – a PCB when oven is at working temperature use
protective gloves or a heat resistant tool. We recommend the use of our PCB carrier 625 to
handle the placement an removal of the PCB.
When the oven produce too much smoke, pull out the plug and close the door because then
the flames will be extinguished.
Put no flammable materials near or on the reflow –oven, don’t block the ventilation grate.
Don’t touch the cover of the oven, it can be hot. You risk a serious burning of the skin.
Machine location:
Use this oven not outdoors! The oven is developed to install it on a flat, dry surface. This
surface or table must be capable to care a weight of at least 30 Kg. The oven should be used
with normal room temperatures from 15 to 25 degrees.
It is not allowed and even dangerous to build it in a cupboard or box. Install this oven not
near a heating element or stove, also not in a wet environment.
Power supply:
Put the main plug in the wall socket near by the oven, this is important! Because in case of
an emergency the operator can pull out the plug.
The power supply is 230V 50 Hz AC normal power outlet. It must be secured with a 16 A
fuse. This oven must have a dedicated power outlet which can only be used by this oven.
Normal use:
The oven is developed only for soldering of PCB’s , don’t use the oven for food, animals or
heating of other materials. You will lose warranty if you don’t commit to those rules.
Don’t use the oven when it’s damaged or not working properly.
Check the properly working of the oven by following the checklist below:
1. Check the door. The door must not be bent or damaged. After firing-up on the oven
check the closing mechanism by opening and closing door. The oven must respond to
it. If not DON’T USE THE OVEN but contact your dealer. Don’t use the oven when there
is a piece of material between the door latch and ceiling’s. When the door or ceilings
are damaged it’s dangerous to use the oven
2. Check the hinge and safety door handles. Don’t use the oven if they are broken or
loose.
3. Check the door sealing. Are they not damaged?
4. Check if there are no dents in the oven space
5. Check the line cord, plug and outlet. Be sure they are not damaged.
Clean the oven frequently, when the operator doesn’t clean the oven frequently there can
be cause a dangerous situation
High voltage - ONLY QUALIFIED PERSONS MAY OPEN THE CASING:
The casing may never be opened or removed! Inside the machine are high voltages which
can be lead to dead or serious injuries.
Don’t put the plug and the line cord into any kind of liquid. Avoid situations that liquids or
other materials entering the oven through door latching or ventilation grate.
