Speedfit Speedboard ProXL Manual de usuario

This product is a non-powered treadmill that is controlled by the self-control
of the exerciser.
To use this product properly and prevent potential risk, it is essential to
maintain, Use and manage this product after reading this user’'s manual
thoroughly.
This content and specifications are subject to change without prior notice to improve the performance of the product.
User’s Manual

1_
2_
3_
4_
5_
6_
7_
8_
SAFETY INSTRUCTIONS
ENVIRONMENTAL SPECIFICATIONS
DESCRIPTION OF EACH PART
ASSEMBLY PROCEDURES
SPECIFICATIONS
PRODUCT INFORMATION
MAINTENANCE
WARRANTY INFORMATION
_ _ _ _ _ _ _ _
_ _
_ _ _ _ _
_ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _
_02
_05
_06
_08
_10
_11
_12
_13
TABLE
OF
CONTENTS

2
1. SAFETY INSTRUCTIONS
Be sure to read this manual before using the treadmill.
Safety signs are attached to the treadmill.
Post a safety sign near the equipment.
Before using the treadmill, check the following notes and information.
Safety instructions before use

3
2. Safety Issue for Use
»Be careful not to let the product get wet or get water or drink inside.
»Do not place a water bottle with the lid open on the product.
»If you find a problem with the product, stop using it immediately and contact the
customer service center. Never repair the treadmill yourself.
»Always install the product only on a horizontal and firm floor.
1. SAFETY INSTRUCTIONS
Please read the owner’'s manual in its entirety before operating the treadmill.
◈ To help the user’s understanding, this manual uses the following symbols.
1. Danger / Warning / Caution / Safety Notice
[Danger] If the product is used after ignoring this symbol,
it may cause a serious injury to the user.
[Warning] If the product is used after ignoring this symbol,
the user may receive a serious injury.
[Caution] If the product is used after ignoring this symbol,
the user may receive an injury or the product may be damaged.
[Notice] This symbol indicates a helpful note for using,
installing, and managing this product.
If the product is used after ignoring this symbol,
it may cause a serious injury to the user.

4
1. SAFETY INSTRUCTIONS
»Talk to your doctor before starting your workout. If you have heart disease, high blood
pressure, diabetes, chronic respiratory disease, high cholesterol, smoking or other
chronic illness or disability, you should consult your doctor.
»Pregnant women should consult their physician before beginning an exercise program.
»If you feel dizzy or nauseous while exercising, stop using the product immediately, and
consult the doctor for your health.
»Must be supplied or approved by the manufacturer and must be used for repair or
maintenance of the treadmill.
»This product is a non-powered treadmill with speed controlled by user's self-control.
It has no emergency stop function. The treadmill user must adjust the speed to stop.
You should be familiar with the operation principle and function of the product before
using the treadmill.
»When putting on a treadmill, do not go directly to the belt.
Use the footrest by holding the handle on the back of the machine.
Never ride from the front.
»Please be careful that loose clothes, towels, shoelaces, etc. are not caught on the belt
as foreign materials may get caught between the treadmill and the belt.
»Wear shoes with rubber soles or shoes with good friction. Do not wear leather soles or
high shoes.
»Maintain an appropriate speed for you without forcing the pace while using the
treadmill. Do not run faster than your physical ability.
»Never touch the walking belt or the part connected to the walking belt or lean against
the walking belt while using the treadmill.
»To use this treadmill safely, a space of at least 2 x 1m(80 x 40inch) is needed around
the treadmill.
»Never leave children unsupervised around a treadmill.
»Two or more users should not use the treadmill at the same time.
»Check the normal operation of the treadmill before use, and replace worn or damaged
parts immediately and do not use until repaired.
»Accelerate and decelerate for safety, please hold the handle when riding on the treadmill.
»Inspect the product on a regular basis and keep it safe.
Regular maintenance is the responsibility of the user / owner or facility operator.
If the product is used after ignoring this symbol,
the user may receive a serious injury.
If the product is used after ignoring this symbol,
the user may receive an injury or the product may be damaged.

2m
30cm
5
2. ENVIRONMENTAL SPECIFICATIONS
»Operating Conditions
Ambient Temperature : +10°C to +40°C (50°F to +104°F)
Relative Humidity : 20 to 95%
»Transportation & Storage Conditions
Temperature Range : -18°C to +49°C (0°F to +120°F)
Relative Humidity : 20 to 95%
»This product is a non-powered treadmill that can be controlled by the user's own will
and does not need an electrical outlet.
»For safe use, at least 2,000 mm of safety space is required at the rear of the treadmill
and at least 300 mm left and right.
»The product should only be installed in a hardened room. Do not place on a soft carpet.
»Adjust the level foot so that the product does not sway, and tighten the level foot nut
so that it does not come loose.
»To move the product, hold the shift knob and tilt the product to roll the wheel on the
ground.
»Do not lift the product by the injection cover and belt.
1. Environmental specifications
2. Installation and Transportation

6
This content and specifications are subject to change without prior notice to improve the performance of the product.
3. DESCRIPTION OF EACH PART
1
2
3
4
5
6
7
8
9
10
Handle_L
Handle_R
Post_L
Post_R
Side Cover_L
Side Cover_R
Working Belt
Moving Handle
Moving Wheel
Level Foot
1
1
1
1
1
1
1(set)
2
1
4
NO Part name Quantity
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
1. Pro XL

7
3. DESCRIPTION OF EACH PART
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Part name
1
2
3
4
5
6
7
8
9
10
1(set)
1
1
1
1
1
1(set)
2
1
4
NO Quantity
Console
Handle
Post_L
Post_R
Side Cover_L
Side Cover_R
Working Belt
Moving Handle
Moving Wheel
Level Foot
2. Pro XL
This content and specifications are subject to change without prior notice to improve the performance of the product.

8
※ The main body and ⑤ and ⑥ covers are delivered in assembled condition.
1. Components: Treadmill main body, handle _ left / right (①, ②), column _ left / right (③, ④)
2. Insert the ③ and ④ pillar (the round part is out) into the pillar grooves of cover ⑤ and ⑥.
3. ①, ② Put the handle on the column and tighten the bolt, spring washer, and flat washer.
4. Tighten the bolts to the grooves on the sides of ⑤ and ⑥ cover with the T wrench (6mm).
5. Adjust the level foot and tighten the nuts so that the product does not shake.
How to assemble Pro XL
4. ASSEMBLY PROCEDURES
2
3
4
1. Pro XL
①
③
④
⑤
⑥
②

9
※ The main body and ⑤ and ⑥ covers are delivered in assembled condition.
1. Components: Treadmill body, console (①), handle (②), column left / right (③, ④), tool
2. Connect the cable connection cable of cover ⑥ of the main body to the lower cable
connection line of ④ pole.
3. Insert the ③ and ④ pillar (the round part is out) into the groove of the cover of ⑤ and ⑥
cover.
4. (2) Connect the connecting wire of the handle to the upper connecting wire of column (4).
5. ② Place the handle on the column and tighten the bolt, spring washer, and flat washer.
6. Tighten the bolt with a T wrench (6mm) to the groove on the side of cover ⑤ and ⑥.
7. ② Connect the connector on the top of the handle to the console.
7. Insert the console into the handle joint ②, tighten the bolts, insert the batteries, and check
the operation.
8. Adjust the level foot and tighten the nuts so that the product does not shake.
How to assemble Pro XL
4. ASSEMBLY PROCEDURES
1
3,4
5
6
2. Pro XL
①
②
③
④
⑤
⑥
Tabla de contenidos
Otros manuales de Rueda de andar de Speedfit
Manuales populares de Rueda de andar de otras marcas

Smooth Fitness
Smooth Fitness EVO 3i Manual de usuario

NordicTrack
NordicTrack NETL81810.0 Manual de usuario

Schwinn
Schwinn 830/Journey 8.0 Manual de usuario

Keys Fitness
Keys Fitness HealthTrainer HT-740T Manual de usuario

Spirit
Spirit XT8 Manual de usuario

NordicTrack
NordicTrack T 14.0 Treadmill Manual de usuario













