Spedal CL796W Manual de usuario
CL796W / CL797 / CL810
025C3525-EN
English
Smart Car Stereo
English-01
1. Safety Guidelines
· Do not operate this product while driving.
· Do not install or operate this product with wet hands.
· Do not install this product in a place with high temperature,
humidity, flammable, explosive gas or liquid.
· Do not install this product in an area that interferes with the
driver's sight or driving safety.
· Do not install this product on the airbag cover or within the
working range of the airbag.
· Do not leave this product in a closed vehicle with high tem-
perature for a long time.
· Do not operate this product over rated voltage.
· Do not use non-original cables and accessories.
· Do not use sharp objects such as awls or scissors to cut this
product and its accessories.
· Do not disassemble, repair or modify this product and acces-
sories by yourself.
· Do not install, use or place this product within the reach of
children under 16 years of age.
1.1 Warnings · Do not press the lens too hard to avoid damage or dislocation of
the lens.
· Do not directly touch the lens surface, so as not to affect the
recording effect.
· Do not remove the memory card during the shutdown process to
avoid file damage.
· When using the memory card for the first time, please format it
on this product to ensure stable reading and writing.
· When not using the product for a long time, please pull out the
memory card to ensure the performance of the memory card.
1.2 Precautions
Scan the QR code, select the corresponding model, and
view the User Manual.
https://spedal.cc/html/support/download/navicam.html
For any questions please contact [email protected]
English-02
2. User Guide
2.1 Package List
◆ Audio Cable ◆ Quick Guide◆ Dashboard Pad
Mounting Disk
◆ Device ◆ Suction Bracket ◆ Power Cable
◆ USB Type-C Cable
（Optional）
◆ TF Card（Optional）
◆ Camera（Optional） ◆ Camera Cable
（Optional）
Note
Do not use cables and components that are not original. Gifts and
accessories are not covered under warranty. The package contents
of this product may change without prior notice, and the actual
contents of the package shall prevail.
2.2 Product Introduction
Charger/Wired Android Auto port
USB-C Port TF Card Slot
AUX OUT PortAV IN Port
Screen
English-03
Note
The installation position of equipment and brackets should not block
the driver's sight and affect driving safety.
2.3 Suction Bracket Installation
1.Align the suction bracket clips with the holes on the back of
the device and push them up to secure the bracket.
2.Thoroughly clean and dry the car dashboard surface, remove
dust or debris, and make sure the surface is flat.
3.Remove the 3M adhesive release paper from the dashboard
pad mounting disk and adhere it to a clean instrument panel
surface.
4.Allow to sit for 3 hours or more to ensure a strong bond. Then
remove the protective film from the dashboard pad.
5.Tear off the protective film from the suction bracket, place the
suction cups firmly in the center of the dashboard pad mount-
ing disk, and press the lock button.
6.Adjust the angle of the device screen.
2.4 TF Card Installation（Optional）
· Insert the TF card into the TF card slot.
· The self-provided TF card should meet the following require
ments: Class 10 or above, the capacity does not exceed 128GB.
English-04
2.6 Camera Installation（Optional）
2.6.1 Windshield
1. Thread the camera's wire through the hole on the adhesive
bracket, and secure the camera tightly to the bracket.
2.Peel off the protective film from the adhesive bracket, and attach
the bracket to the vehicle's front windshield. Press firmly to
ensure it adheres securely.
3.Use the camera extension cable to connect the camera to the
device.
4.Adjust the angle of the lens.
Note
Depending on the vehicle, the cigarette lighter socket may be located
in a different position. The figure provided is for reference only.
2.5 Device Installation
Insert the power cable into the car cigarette lighter, and connect
the other end to the power interface of the device.
English-05
2.6.2 Rear Windshield
1. Thread the camera's wire through the hole on the adhesive
bracket, and following the direction of the arrow, tighten and
rotate the bracket with the camera, ensuring they are securely
fastened together.
2.Peel off the protective film from the adhesive bracket, and
attach the bracket to the vehicle's rear windshield. Press firmly
to ensure it adheres securely.
3.Use the camera extension cable to connect the camera to the
device.
4.Adjust the angle of the lens.
2.6.3 Headrest Support Rod
1. Thread the camera's wire through the two wire holes on the
support pole bracket.
2.Following the direction of the arrow, tighten and rotate the
bracket with the camera, ensuring they are securely fastened
together.
3.Attach the bracket to the headrest support pole.
4.Secure the bracket using the screws provided in the accesso-
ries.
5.Use the camera extension cable to connect the camera to the
device.
6.Adjust the angle of the lens.
English-06
3.1 Home Screen
3. Features And Settings
CarPlayAndroid Auto AirPlay DVR
Audio Out
05/20/2023 12:30:24
1
2 3 4 5
6
7 8 9 10
Recording Status Red Flash: Recording On
Video Sound Status Recording Mute
Android Auto Status Green: Connected
Video Lock Status Lock Unlock
CarPlay Status Green: Connected
Speaker Status
System date
FM Status
TF Card Status
System time
05/20/2023
12:30:24
Green: Connected
On Off
Normal Not Inserted
1
English-07
CarPlay
Android Auto
AirPlay
2
3
4
Android Auto connected to the device.
Android Auto not connected.
Android Auto
Apple CarPlay
Apple AirPlay
Apple CarPlay connected to the device.
Apple CarPlay not connected.
Apple AirPlay connected to the device.
Apple AirPlay not connected.
DVR
Audio Out
5
6
7
8
9
10
DVR
Sound plays from the device built-in speaker.
Sound plays from the car via Bluetooth connection.
Sound plays from the car via AUX connection.
Sound plays from the car via FM Transmitter.
Adjust the screen brightness.
Brightness adjustment
Adjust the system volume.
Volume adjustment
Playback
View photos and videos.
System settings and Video settings.
Settings
Recording Off.
Recording On.
Audio Out
English-08
Bluetooth
******
< Settings Bluetooth
Now discoverable as “iPhone”.
MY DEVICES
OTHER DEVICES
Spedal-*****
Bluetooth Pairing Request
******
Cancel Pair
Use CarPlay with
“NaviCam”
******
Not Now Use CarPlay
Sign in to your iPhone
Airplane Mode
Not Connected >
On >
Settings
Wi-Fi
Bluetooth
·iPhone is running iOS 9 or higher. (such as iPhone XR and above;
iPhone 11 and above; iPhone SE (second generation) and above, etc.)
·It also requires the CarPlay system and the iPhone's voice system to
be turned on. Please check if Siri is enabled.
·When using wireless CarPlay for the first time, the connection time
may take around 30 seconds, please be patient.
Note
The iPhone version that supports wireless CarPlay requires the follow-
ing:
For more details visit: http://www.apple.com/ios/carplay
3.2 Apple CarPlay
3.2.1 Apple CarPlay Wireless Connection
Go to Settings on your iPhone, turn on “Wi-Fi” and “Bluetooth”.
Enter the “Bluetooth ” menu and select the Bluetooth device
starting with "Spedal-*****" from the list of “OTHER DEVICES”
Bluetooth devices.
Wait for about 20-30 seconds, and a prompt "Bluetooth Pairing
Request" will pop up on your phone. Select "Pair" to successfully
pair your phone with the device.
Click " " on the home screen to enter the CarPlay.
·Different versions of iOS may display
differently, please refer to the actual
situation.
·The first connection may take a longer
time, please be patient.
·If you want to switch to Android Auto or
AirPlay, you need to turn off Bluetooth and
Wi-Fi on your phone to disconnect the
Apple CarPlay connection mode.
Note
1
1
2
2
3
3
Then, a prompt "Use CarPlay with"NaviCam"?" will pop up on
your phone. Select“Use CarPlay”.
Please wait for a moment and you will enter the CarPlay mode.
4
4
5
Otros manuales para CL796W
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Receptor de coche de Spedal
