Spectrex SharpEye 40/40 Series Manual de usuario
Quick Start Guide
00925-0200-9975, Rev AA
May 2021
Spectrex SharpEye™ 40/40 Series
Flame Detectors
Warning
WARNING
Physical access
Unauthorized personnel may potentially cause significant damage to and/or misconfiguration of end
users’ equipment. This could be intentional or unintentional and needs to be protected against.
Physical security is an important part of any security program and fundamental to protecting your
system. Restrict physical access by unauthorized personnel to protect end users’ assets. This is true for
all systems used within the facility.
Contents
Models......................................................................................................................................... 3
Installing the detector.................................................................................................................. 6
Special conditions for safe use....................................................................................................15
Declarations of Conformity........................................................................................................ 16
Reference data........................................................................................................................... 18
Quick Start Guide May 2021
2 Spectrex.net
1 Models
The SharpEye 40/40 Flame Detectors are electro-optical devices designed to
identify fire events, enabling alarm activation. The detectors are intended
for indoor or outdoor use and can be used stand alone or connected to an
alarm/automatic extinguishing system.
The SharpEye 40/40 series comprises the following detectors:
SharpEye 40/40-I
The SharpEye 40/40C-I, a multispectrum Quad-sense™ flame detector,
detects hydrocarbon fuel and gas fires with enhanced performance,
advanced long distance detection of hydrocarbon fires, fast detection in
under five seconds, and strengthened reliability. The SharpEye 40/40C-I is
based on proven triple infrared (IR3) technology, ensuring high sensitivity
with superior immunity to false alarms.
SharpEye 40/40C-M
The SharpEye 40/40C-M multispectrum Quad-sense IR flame detector is
specifically designed for the detection of hydrocarbon and hydrogen flames
with enhanced performance, advanced long distance detection of hydrogen
and hydrocarbon fires, fast detection in under five seconds, and
strengthened reliability. The SharpEye 40/40C-M is based on proven triple IR
(IR3) technology, ensuring high sensitivity with superior immunity to false
alarms.
SharpEye 40/40C-LB
The SharpEye 40/40C-LB is a dual spectrum ultraviolet (UV)/IR flame
detector, designed to provide fast detection in under five seconds of a range
of fires, such as hydrocarbon-based fuel and gas, hyrdoxyl, hydrogen, metal,
and inorganic.
SharpEye 40/40C-L4B
The SharpEye 40/40C-L4B is a dual spectrum UV/IR flame detector designed
to provide fast detection in under five seconds of hydrocarbon-based fuel
and gas fires.
SharpEye 40/40D-I
The SharpEye 40/40D-I, an ultra-fast multispectrum Quad-sense IR3 flame
detector, provides superior, longest distance detection of hydrocarbon fires
at up to 295 ft. (90 m), exceptional ultra-fast detection in under 50 msec,
and unparalleled reliability. The SharpEye 40/40D-I is based on proven Triple
IR (IR3) technology, ensuring highest sensitivity with best immunity to false
alarms.
May 2021 Quick Start Guide
Quick Start Guide 3
SharpEye 40/40D-M
The SharpEye 40/40D-M is a multispectrum Quad-sense IR flame detector
that provides superior, longest distance detection of hydrogen (at up to 165
ft. [50 m]) and hydrocarbon fires (at up to 295 ft. [90 m]), exceptional ultra-
fast detection in under 50 msec, and unparalleled reliability. The SharpEye
40/40D-M is designed to deal with the challenges of invisible fires based on
proven IR3 technology, ensuring highest sensitivity with best immunity to
false alarms.
SharpEye 40/40D-LB
The SharpEye 40/40D-LB is an ultra-fast UV/IR flame detector, which is able
to detect in under 20 msec and features a unique dual sensor with selectable
UV and IR channels that can be used separately or combined. The detector is
designed to detect a range of fires, such as hydrocarbon-based fuel and gas,
hydroxyl, hydrogen, metal, and inorganic.
SharpEye 40/40D-L4B
The SharpEye 40/40D-L4B is an ultra-fast UV/IR flame detector that is able to
detect in under 20 msec, and features a unique dual sensor with selectable
UV and IR channels that can be used separately or combined. The detector is
designed to detect hydrocarbon-based fuel and gas fires.
Table 1-1: SharpEye 40/40 Series General Technical Specifications
Spectral response Infrared and ultraviolet bands
Response time Varies according to model, typically under
5 seconds
Field of view Varies according to model, up to 100 degrees
Output 4-20 mA, relays, communication
Enclosure Stainless steel 316 or aluminum polyurethane
painted
Operating voltage 18-32 Vdc
Maximum power rating 9.6 W
Relay contacts 2A/30 Vdc
Over voltage category 2
Relative humidity Non-condensing relative humidity up to 100%
Quick Start Guide May 2021
4 Spectrex.net
CAUTION
If the product is used outside of specified limits, this voids the product
certification, and our company is not responsible for any incurred warranty
expense.
Do not open this product, except for the terminal compartment as listed in
this document, under any circumstances.
The detector is not field-repairable. Any attempt to modify or repair the
internal circuits or change their settings, as this will impair the system’s
performance and void the product warranty.
Opening the attachment screws to dismantle the front part of the detector
from remaining parts is restricted and voids the product warranty.
May 2021 Quick Start Guide
Quick Start Guide 5
2 Installing the detector
Table 2-1: Required Tools
Tool Function
Hex key 1.5 mm Fasten back cover security screw
Hex key 6 mm Adjust the tilt mount
Hex key 10 mm Affix the detector to the tilt mount
Hex key 3/16-in. Attach protective cover to detector
Flat screwdriver 6 mm Connect ground terminal
Flat screwdriver 2.5 mm Connect wires to the terminal blocks
Hex key 5/16-in. Stop plug 3/4 national pipe thread (NPT)
Open wrench 28 mm Stop plug M25 only
Note
These are standard tools and are not supplied with the detector.
2.1 Mounting accessories
2.1.1 Tilt mount
The tilt mount (PN 877090) enables the detector to be mounted on flat wall
surfaces.
For more information, see Attach detector to tilt mount.
2.1.2 Duct mount
The duct mount (PN 877670) allows flame detection in cases where the
detector cannot be installed inside the area.
The duct mount limits the cone of vision of the installed detector to 70
degrees horizontal and vertical.
For more instructions, refer to the Duct Mount Manual (00809-0600-4975).
Quick Start Guide May 2021
6 Spectrex.net
2.1.3 Pole mount
Use the pole mount to mount the detector on poles with the following
diameters:
Table 2-2: Pole Mount Options
Pole diameter Part number
2 in. (50.8 mm) 789260-2
3 in. (76.2 mm) 789260-1
4 in. (101.6 mm) 789260-3
For more instructions, refer to the Pole Mount Reference Manual.
2.2 Attach detector to tilt mount
Procedure
1. Unpack the detector.
2. Insert location pins on the tilt mount into the openings on detector
housing.
3. Thread the holding screw and tighten it.
Note
To change the detector field of view, release the horizontal and
vertical locking screws.
4. Point the detector toward the protected area and ensure the view of
the area is unobstructed.
5. Secure the detector in that position by tightening the locking screws
on the tilt mount.
The detector is now correctly located, aligned, and ready to be
connected to the system.
May 2021 Quick Start Guide
Quick Start Guide 7
2.3 Open the back cover
Procedure
1. Loosen the back cover security screw.
A. Back cover security screw
B. Protective plug
2. Unscrew the back cover.
Note
The back cover is attached by a security cable.
3. Remove the protective plug.
Quick Start Guide May 2021
8 Spectrex.net
Table 2-3: Terminal Box
Terminal Function
T1 24 Vdc (+)
T2 24 Vdc (-)
T3 External built-in test (BIT) switch
T4 Fault relay - normally open
T5 Fault relay
T6 Fault relay - normally closed
T7 Alarm relay - normally open
T8 Alarm relay
T9 Alarm relay - normally closed
T10 0-20 mA (+)
T11 0-20 mA (-)
T12 Alarm output
(40/40D models)
T13 RS485 (+)
T14 RS485 (-)
T15 Accessory relay - normally open
T16 Accessory relay
T17 Accessory relay - normally closed
2. Use Figure 2-2, Figure 2-3, Figure 2-4, and Figure 2-5 for typical
wiring configurations.
Quick Start Guide May 2021
10 Spectrex.net
Otros manuales para SharpEye 40/40 Series
2
Este manual sirve para los siguientes modelos
13
Tabla de contenidos
Otros manuales de Sensor de seguridad de Spectrex
Spectrex
Spectrex SharpEye 40/40M Manual de usuario
Spectrex
Spectrex SharpEye 40 Series Manual de usuario
Spectrex
Spectrex SharpEye 40/40R Manual de usuario
Spectrex
Spectrex SharpEye 40/40C Series Manual de usuario
Spectrex
Spectrex SharpEye 777670 Manual de usuario
Spectrex
Spectrex SharpEye 40/40UFL Manual de usuario
Spectrex
Spectrex SharpEye 40/40R Manual de usuario
Spectrex
Spectrex SharpEye 40/40C Series Manual de usuario
Spectrex
Spectrex SharpEye 20/20R Instrucciones de funcionamiento
Spectrex
Spectrex SharpEye FS-1400 Manual de usuario
Spectrex
Spectrex SharpEye 40/40I Manual de usuario
Spectrex
Spectrex SharpEye 40/40U Manual de usuario
Spectrex
Spectrex SHARPEYE 20 Manual de usuario
Spectrex
Spectrex SharpEye 40/40 Series Manual de usuario
Spectrex
Spectrex SharpEye 40/40UFI Manual de usuario
Spectrex
Spectrex SharpEye FS-1400 Manual de usuario
Spectrex
Spectrex SHARPEYE 20 Manual de usuario
Spectrex
Spectrex SharpEye 40/40 Series Manual de usuario
Spectrex
Spectrex SharpEye 40 Series Manual de usuario
