Speco N8NXP Manual de usuario

/NXP

Quick Start Guide

/NXP

NVR Series

Quick Start Guide

Version 1.0.1

Table of Contents

Unit .............................................................................................................................................. 3

1.1

Check Unit ......................................................................................................................... 3

1.2

Product Label .................................................................................................................... 3

1.3

Front Panel ........................................................................................................................ 3

1.4

Rear Panel ......................................................................................................................... 4

Unit Operation ............................................................................................................................. 6

2.1

Unit Login .......................................................................................................................... 6

2.2

Camera etup .................................................................................................................... 7

2.3

chedule etup .................................................................................................................. 7

2.4

Playback ............................................................................................................................ 8

Remote Web Access ..................................................................................................................... 9

Welco e

Thank you for purchasing this NVR.

This guide is designed to be a quick reference for installing the system.

Please read this guide carefully before installing and operating the unit.

If technical assistance is needed, please contact peco Technologies Technical upport.

Phone: 1-800-645-5516 option 3

Email: techsuppo[email protected]

I portant Safeguards and Warnings

peco Technologies assumes no liability or responsibility for any fires or electrical shock caused by

improper handling or installation.

peco Technologies is not liable for any problems caused by unauthorized modifications or attempted

repair, which will void the warranty.

Note: All of the installation and operations here should confor to local electric

safety rules.

Package Contents

Power Cable

CD

Mouse

Ethernet Cable

Quick tart Guide

Unit

Rack mount ears and screws (N16NXP & N32NX only)

1Unit

1.1 Check Unit

After unpacking the unit, please check for any visible damage. Then check to make sure that all accessories are

included.

Check that the model number and serial number that’s listed on the label on the unit are the same as what’s

listed on the package label.

1.2 Product Label

Check that the model number and serial number that’s listed on the label on the unit are the same as w

listed on the package label.

1.3 Front Panel

The front panels are shown in

Figure

After unpacking the unit, please check for any visible damage. Then check to make sure that all accessories are

Check that the model number and serial number that’s listed on the label on the unit are the same as what’s

Check that the model number and serial number that’s listed on the label on the unit are the same as w

Figure

s 1-1 (N32NX), 1-2 (N16NXP), and 1-3 (N8NXP).

Figure1-1

Figure1-2

Figure 1-3

After unpacking the unit, please check for any visible damage. Then check to make sure that all accessories are

Check that the model number and serial number that’s listed on the label on the unit are the same as what’s

Check that the model number and serial number that’s listed on the label on the unit are the same as w

hat’s

1.4

Rear Panel

The N8NXP and N16NXP rear panels are shown in Figure 2-2 and Figure 2-2 for reference. The N32NX rear

panel is shown in Figure 2-3

Figure 2-2

Figure 2-3

Please refer to the following sheet for detailed information.

Port Na e Connection Function

U B3.0 port May be used for a mouse and external storage.

Network port Gigabit Ethernet port. Connect to a network cable.

HDMI HDMI v1.4 Used for video output to a monitor/display with

HDMI port

VGA VGA output Used for video output to a monitor/display with VGA

port

GND Ground end

MIC IN Audio input port Audio input port for two-way audio. Connect a

microphone.

MIC OUT Audio output port

Audio output port to a speaker

Two-way audio output.

Audio output on full screen live view.

Audio output on full screen playback.

Port Na e Connection Function

R 232

(N16NXP/N32NX

only)

R 232 port Communication port

(N16NXP/N32NX

only)

R 485 Control port for PTZ keyboards, etc

1 – 4 (N8NXP)

1 – 16

(N16NXP/N32NX)

ensor Input ensor input ports

NO Relay output Normally open terminal

C Common terminal

CTRL 12V Relay output /

Power output

Used as the last relay output. Also supplies 12VDC

power when there is no alarm.

+12V Power output 12V DC power output. Can be used for devices that

require less than 1A.

2Unit Operation

2.1

Unit Login

After the system boots up, the EZ etup wizard is displayed. ee Figure 3-1.

Tips



Check the box to display the EZ etup wizard window when the system is rebooted.

Figure 3-1

Click Cancel or Next to display the login interface. ee Figure 3-2 for the login interface.

Listed below is the default login ID:

Userna e:

admin (administrator, local and remote)

Note:

For security purposes, it is required to create the ad inistrator password on the initial login.

5 incorrect login attempts within 30 minutes will result in a lock on the account. Once the unit is locked, please

wait for 30 minutes before attempting to log in again.

To reset the password, please contact peco Technologies Technical upport.

Figure 3-2

2.2

Ca era Setup

The NVR supports plug and play for IP cameras through the built-in PoE ports. In addition, the NVR can scan

for IP cameras that are on the same local network through the EZ Camera feature.

To add cameras, right click and then click on Main menu-> etup->Camera-> ite Locate. ee Figure 3-3.

Figure 3-3

Click Device earch to find cameras on the local network.

Double click on a camera to add it to the NVR.

2.3

Schedule Setup

Right click and select Main Menu-> etup-> torage-> chedule. ee Figure 3-4.

elect the recording mode and then click and drag to set up the recording time period. The system is set to

24hr continuous recording by default.

Figure 3-4

2.4

Playback

Right click and select Main Menu-> earch to bring up the playback interface as shown in Figure 3-6. From this

screen, you can access EZ earch as well as searching by timeframe.

Figure 3-6

3Re ote Web Access

Open Internet Explorer and enter the NVR’s IP address in the address bar.

Follow the instructions to install the plug-in.

After installation, the login interface is shown as below. ee Figure

4-1

Please enter the user name and password.

Figure 4-1

For detailed operation infor ation, please refer to the user’s anual.

Otros manuales para N8NXP

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de Speco

Speco

Speco N32NS Manual de usuario

Speco

Speco N8NU Manual de usuario

Speco

Speco AP500M Manual de usuario

Speco

Speco N8NXP Manual de usuario

Speco

Speco N8NRE Manual de usuario

Speco

Speco N4JLN Manual de usuario

Speco

Speco NVRP4 Manual de usuario

Speco

Speco NS Series Manual de usuario

Speco

Speco N8 Manual de usuario

Speco

Speco TVIUTPPTP Manual de usuario

Speco

Speco N8NRE Manual de usuario

Speco

Speco NXL Manual de usuario

Speco

Speco NVRP4 Manual de usuario

Speco

Speco N16NRD Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario