Speco VMS-2 Manual de usuario
VMS-2
4” Color LCD Service Monitor Kits
User’s Manual
Copyright @1998 by this company. No Part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system or translated into any language
or computer language, in any form or any means. Electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of this
company.
I. Security notes
The unit is only suitable for indoor use. The heat being generated in the unit has to
be removed via air circulation. Therefore the circulation vents in the housings must
not be covered with any objects. Do not insert or drop anything into the air vents !
This could result in a short-circuit. If the unit is used for purposes other than origi-
nally intended, if it is connected in the wrong way or not repaired by authorized
skilled personnel, there is no liability for possible damage. Do not use any fluid,
cleaning chemicals or abrasive materials. If the unit is to be scraped then take it to
the local recycling plant for disposal.
We do not accept any liability for the following :
a) If the unit is used for purposes other than originally intended.
b) If The unit is wrongly connected.
c) If the unit is not repaired by an qualified authorized engineer.
II. Application range
The LCD color monitors LSM-413 active matrix technology offer a sharp and high
contrast display. It can be universally used for Surveillance systems, In-Vehicle
Reverse monitoring systems or for Multimedia applications. The additional Audio
input enable sound reception via Headphones.
I. CONTENTS :
1. 4” LCD monitor
2. Carry Bag and Belts
3. 1000mA Rechargeable Ni-H Battery
4. Three velcos , two for monitor and one for battery.
5. 30 cm power cord.
6. 15V DC Charger. This Charger should only be used to
charge the battery NOT to supply the unit. If used on the
unit Serious damage may occur which will not be covered
by the warranty.
7. RCA to BNC adapter 4 pcs.
8. Spacer Protector
II . Power Operating and Connections
1. Please charge the Ni-H Battery for one and half hours
before using it for the first time.
2. Please stick two velcos to the rear of monitor. Then place
the monitor in the correct position in the bag. This will then
fasten the monitor to the bag will restrict any movement
when the bag lid is open.
3. Connect the battery to monitor via the DC power cord
(Supplied).
III. LCD Monitor Operation and Connections :
Controls and Connectors on LCD monitor:
1. Brightness control
2. Contrast Control
3. Volume control for headphones
4. Audio output for headphones
5. Main Power switch
6. Video Left-Right Reverse Switch
7. Audio input
8. Video output
9. Video 1Input
10. Video 2 Input
11. Video Input 1or 2 Switch
12. 12V DC Power Input
1) Switch on the monitor using the Main Power switch (5).
2) Adjust the brightness control (1) and Contrast (2) in order
to obtain an image as clear and sharp as possible.
3) Adjust the volume control of the headphones
iii.. Connections
1) Connect the video source to the Video input 1(9) or
Video 2(10) Inputs.
2) Select the correct Video input using the Video Input
switch (11).
3) Connect the Audio source to the audio input (7).
4) Connect an electronically regulated 12V power supply
The positive pole must be connected to the center
contact.
5) Connect headphones to the Audio Output if required.
i
Operation
1) Switch on the monitor using the Main Power switch (5).
2) Adjust the brightness control (1) and Contrast (2) in order
to obtain an image as clear and sharp as possible.
3) Adjust the volume control of the headphones to the
desired level.
4) Select the correct Video Input.
vi. Technical Data
LCD technology: TFT active matrix
Display size: 4”
Active area : 82.1 x 61.8 mm
Color system: NTSC or PAL
Sync. :.Horizontal :15, 625 Hz, Vertical : 50 Hz.
Resolution: 480 x 234 , 112,320 Pixels
Audio level: 1V/10k
Video Input : 1Vpp 75 £[
Dimensions ( Bag ) :190.0 (W) x 130.0 (H) x 60 (D) mm
Weight : 1.2 Kg
CAUTION: When using headphones do not adjust the vol-
ume to a high position.
Start at the lowest setting and gradually raise it so it can be
heard. The human ear gets accustom to the volume setting,
so do not further increase the volume after getting used to it.
Permanent high volumes can seriously damage your
hearing.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Monitor de Speco
Speco
Speco M284K Manual de usuario
Speco
Speco VM-1501B Manual de usuario
Speco
Speco VM-1502HRC Manual de usuario
Speco
Speco VM-15LCD Manual de usuario
Speco
Speco VM-19LCD Manual de usuario
Speco
Speco VMST7 Manual de usuario
Speco
Speco VM-901B Manual de usuario
Speco
Speco VM-15LCD Manual de usuario
Speco
Speco M215LED Manual de usuario
Speco
Speco PVM10 Manual de usuario
Speco
Speco VGA17LCD Manual de usuario
Speco
Speco M17VLED Manual de usuario
Speco
Speco VMS-2 Manual de usuario
Speco
Speco PVM-2 Manual de usuario
Speco
Speco VM-1201B Manual de usuario
Speco
Speco VGA19LCD Manual de usuario
Speco
Speco M185LCBV4 Manual de usuario
Speco
Speco VM-1401C Manual de usuario
Speco
Speco VM-1005C Manual de usuario
Speco
Speco VM-2001B Manual de usuario
