Speco O4P30X2 Manual de usuario

Quick Start Guide

O4P30X2

Welcome

Thank you for purchasing this network camera!

This owner's manual is designed to be a reference tool for your system.

Please read this manual carefully before operating the unit and retain it for future reference.

Should you require any technical assistance, contact Speco Technologies Tech Support at

1-800-645-5516

1. Electrical safety

All installation and operation here should conform to local electrical safety codes.

Use a certified/listed 12VDC Class 2 power supply only.

Please note: Do not connect two power supplying sources to the device at the same time;

it may result in device damage! The product must be grounded to reduce the risk of

electric shock.

Improper handling and/or installation could run the risk of fire or electrical shock.

2. Environment

Heavy stress, violent vibration or exposure to water is not allowed during transportation,

storage and installation.

This product should be installed in a cool, dry place away from direct sunlight and heat

sources.

Do not install the product in extreme temperature conditions.

Do not expose the camera to electromagnetic radiation. Otherwise it may result in CMOS

sensor failure.

Do not block any ventilation openings.

Do not allow water and liquid intrusion into the camera.

3. Operation and Daily Maintenance

Please shut down the device and then unplug the power cable before you begin any

maintenance work.

Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on

the lens surface.

Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth

Important Safeguards and Warning

Warning

Statement

This camera should be installed by qualified personnel only.

All the examination and repair work should be done by qualified personnel.

Any unauthorized changes or modifications could void the warranty.

This guide is for reference only.

Product, manuals and specifications may be modified without prior notice. Speco

Technologies reserves the right to modify these without notice and without incurring

any obligation.

Speco Technologies is not liable for any loss caused by improper operation.

Note:

Before installation, check the package and make sure that all components are included.

Contact your rep or Speco customer service department immediately if something is

broken or missing in the package.

dampened with a small quantity of neutral detergent. Finally use the dry cloth to clean

the device.

Please use a professional optical cleaning method to clean the enclosure. Improper enclosure

cleaning (such as using cloth) may result in poor IR functionality and/or IR reflection.

The grounding holes of the product are recommended to be grounded to further enhance

the reliability of the camera.

Overview

Installation

①LAN

②HP Audio Out

③MIC In

④Alarm In/Alarm Out

⑤Power

Note: DC24V and AC24V power supply

are optional. Please take real camera as

standard.

◆Install SD Card

Please make sure the wall is strong enough to bear the dome

camera’s weight. Please make sure the camera is powered off

during installation.

① Loosen the two screws of the dome. ② Open the cover and insert SD card.

Insert SD card

◆Install the Camera

① Pull the cables through the bracket. Mount the

speed dome to the bracket.

② Secure the speed dome to the bracket with

the screws.

③ Drill the screw holes on the wall according

to the drill template. Then insert the plastic

plugs into the holes.

⑤ Connect the cables and then hang the

bracket on the wall .

⑥ Fix the bracket to the wall with four

screws.

④ Drive the two screws to the holes indicated

by the arrows (left) and leave 12mm

clearance.

Connections

Alarm Connection:

1. Alarm Input

a) There is one independent alarm input port (ALM-IN1) and

one grounding port (ALM-GND).

b)Alarm input(NO type): Connect DC5V~DC12V voltage

between the alarm input port( ALM-IN1) and the grounding port

(ALM-GND).

c) Alarm input(NC type): Disconnect the voltage between the

alarm input port(ALM-IN1) and the grounding port (ALM-GND).

C IN

Net

k P

o O

Power

ALM-OPEN

ALM-COM

ALM-GND

ALM-IN1

24V A

24V B

Earth

DC24V

AC24V

2. Alarm Output

a) Support 1CH alarm output including OPEN, COM

connections.

b) Alarm output: One passive switch for user to connect alarm

devices; the alarm output state will be auto on/off according to

your setting.

③In the device list, you can view the IP address, model number, and

MAC address of each device. Select the applicable device and double

click to open up the web viewer. You can also manually enter the IP

address in the address bar of the web browser.

5C:F2:07:24:68:B9

O4P30X2

The login interface is shown above. Default user name is admin and

password is 1234. After logging in, follow directions to install

applicable plugins.

●Operation

①Make sure that the camera and the PC are connected to the same

local network. The camera is set to DHCP by default.

②Install IP Scanner from the CD and run it after installation.

4Web Operation and Login

IP Scanner can search for the device on the local network.

Otros manuales para O4P30X2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara IP de Speco

Speco

Speco VIP2PTZ12X Manual de usuario

Speco

Speco O2MB1 Manual de usuario

Speco

Speco O4VLB5 Manual de usuario

Speco

Speco Intensifier O2iTC23 Manual de usuario

Speco

Speco Intensifier OiD4 Manual de usuario

Speco

Speco O2P4X Manual de usuario

Speco

Speco O2iB8M Manual de usuario

Speco

Speco O4D1 Manual de usuario

Speco

Speco VLEDT2G Series Manual de usuario

Speco

Speco ONSIP O2DP8 Manual de usuario

Speco

Speco Intensifier OiMD1 Manual de usuario

Speco

Speco O2MD1 Manual de usuario

Speco

Speco O2MD2 Manual de usuario

Speco

Speco O2P30 Manual de usuario

Speco

Speco VLB1A Manual de usuario

Speco

Speco O6MDP2 Manual de usuario

Speco

Speco O2VLB2 Manual de usuario

Speco

Speco O2BFR Manual de usuario

Speco

Speco O2VB1V Manual de usuario

Speco

Speco O2D60M Manual de usuario

Speco

Speco O2DP9 Manual de usuario

Speco

Speco O8B2M Manual de usuario

Speco

Speco VLDT4W Manual de usuario

Speco

Speco O5B3M Manual de usuario

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario