Spark SP-19 Manual de usuario
SP-19
User's Guide
Compulite R & D
Revised March 1999
Table of Contents
Introduction............................................................................................................................1
Front Panel.........................................................................................................................1
Back Panel..........................................................................................................................1
Optional External Devices..................................................................................................1
Function Keys ........................................................................................................................2
Starting Up.............................................................................................................................2
Service Tools Menu & Displays.............................................................................................2
Accessing Service Tools ....................................................................................................2
Service Tools display.........................................................................................................3
Run.....................................................................................................................................3
Cold Start .......................................................................................................................3
Warm Start.....................................................................................................................3
Test.....................................................................................................................................3
Test LCD display & keys ...............................................................................................4
Disk operations...............................................................................................................4
Select/deselect files ........................................................................................................5
System version ...............................................................................................................5
Main Menu & Displays..........................................................................................................6
Giving a Go command........................................................................................................6
Giving a Hold command ....................................................................................................7
Rstr.....................................................................................................................................7
Load ...................................................................................................................................8
Ctrl .....................................................................................................................................9
View controller levels ....................................................................................................9
Change controller levels.................................................................................................9
View running chasers ...................................................................................................10
View type of controller assignment..............................................................................11
Mac...................................................................................................................................11
Starting Your Show..............................................................................................................12
Playback after warm start.................................................................................................12
Auto Run function............................................................................................................12
Editing Using the Text Keyboard.........................................................................................13
Programming the Show........................................................................................................14
Introduction
The SP-19 is a Spark packaged in a 19 ″rack mount. It can be used as a backup for the
Spark system or a stand-alone system. The stand-alone system can be used to playback
shows recorded on Spark or photon. When used with a Remote Control Unit, SP-19 can be
used as a full featured Spark or Photon.
The SP-19 consists of all the internal hardware of the Spark console, a 2 x 16 character
LCD display, a floppy disk drive, and 6 front panel buttons.
Front Panel
Power switch
2 x 16 LCD display
6 function buttons
Floppy drive
Text keyboard connector
Panel (CAN bus) connector
Back Panel
3 output connectors that transmit DMX512, High-End protocol, or S-Mix.
1 input connector receives DMX input or SMPTE.
Remote bus
Serial port
Parallel port
S/VGA
MIDI In/Out/Thru
Optional External Devices
External devices are supported by the SP-19.
Text keyboard
Macro Extension Keyboard
S/VGA monitor
UWR/UCR
Function Keys
SP-19 Compulite R&D
2
Function Keys
Arrow keys - These keys traverse the display. They are used for selection. A selected item
appears between brackets.
[MENU] - This key toggles between Service Tools functions and the main Service Tools
menu or between the Main menu and A/B crossfade display
[ENTER] - Use this key to apply your selection.
Starting Up
When you power up you can either Cold Start or Warm Start SP -19/4D.
To Warm Start turn on the power switch on the front panel. Your show starts at the same
point it was when you powered down.
Cold Start clears SP- 19/4D’s memory. Cold start can only be accessed via Service Tools
(see Service Tools . There is also a Warm start option in Service Tools.
The system defaults to MIDI On.
Service Tools Menu & Displays
The Service Tools menu provides 4 basic functions:
Run
Test
Disk Operations
System Version Information
Accessing Service Tools
1. When the power is off, press and hold any 2 function buttons.
2. Turn on the power switch.
3. Release the two buttons. The system boots up. When the boot up is complete
the Service Tools menu is displayed.
Service Tools Menu & Displays
Compulite R&D SP-19
3
Service Tools display
Figure 1 - Service Tools menu
Run
This function accesses Cold Start or Warm Start.
Cold Start
1. If <RUN> is not selected, use the arrow keys to select it.
2. Press [ENTER]. <COLD> and WARM are displayed. The default selection is
<COLD>, which is bracketed.
3. Press [ENTER]. The current show is erased. You can proceed to load a new
show. If there is a diskette in the disk drive containing show file 999.9, this
show file is automatically loaded. (See Auto Run , page 12.
Warm Start
1. If <RUN> is not selected, use the arrow keys to select it.
2. Press [ENTER]. <COLD>and WARM are displayed. The default selection is
<COLD>, which is bracketed.
3. Press [
]. <WARM> is now selected; it appears in brackets.
4. Press [ENTER]. The system comes up exactly as it was before shut down. If
chasers are running, they come up running, if a loop was active on A/B, it will
continue, etc. The A/B X-fade exam is displayed on the LCD.
Test
This function is identical to the diagnostic function in Service Tools for the Spark console.
This is used to diagnose hardware problems.
Two Diagnostic Tests are available:
1. Keyboard - Test that the SP-19 buttons are functioning correctly. You can also test the
keys on any of the peripherals such as the Macro Extension Keyboard.
2. CRT - Test the LCD display. This also verifies the correct function of the CRT, if a
monitor is connected.
<RUN> TEST
DI
S
K
O
P
S
Y
S
VER
Service Tools Menu & Displays
SP-19 Compulite R&D
4
Test LCD display & keys
1. Use the arrow keys to select <TEST>.
2. Use the arrow keys to select either <LCD> or <KYBRD>.
3. Press [ENTER].
If you have selected <LCD>, the LCD display runs sequentially through
numbers 0 - 9 in all of the character spaces on the LCD display. If a CRT is
connected, the color test is displayed on the screen.
If you selected the <KYBRD>test, press any of the function buttons on the SP-
19, any of the keys on the ASCII keyboard (if connected), or other peripherals
such as the Macro Extension Keyboard. If the key is in working order, it is
displayed on the LCD display.
4. Exit and return to the main menu by pressing [MENU].
Disk operations
There are 2 disk operations available:
Load image - which is used to upgrade the software.
Load CF - which loads the configuration recorded on the diskette.
Upgrade software
1. Use the arrow keys to select <DISK OP>.
2. Use the arrow keys to select <LOAD IMF>.
3. Press [ENTER]. A list of the Service Tools image file, the system image file,
and the text file are displayed. A right arrow sign designates files selected for
loading (→). See below for selection/deselection of files.
4. Press [ENTER]. The files are loaded. The LCD display shows the progress of
the loading process.
5. When the load is complete, the display shows < BURN > and. Press [ENTER].
6. When the “burn” is complete, press [MENU] to return to the
Service Tools menu.
7. Select <RUN>and cold start the system.
Service Tools Menu & Displays
Compulite R&D SP-19
5
Select/deselect files
1. Toggle the load designation arrow by pressing [↑]or [↓]until the file is on the
upper row of the display.
2. Press the left or right arrow key to deselect or select a file.
Load configuration
1. Use the arrow keys to select <DISK OP>.
2. Use the arrow keys to select the <LOAD CF>. The configuration files on the
diskette are now displayed.
3. Use [↑]or [↓]to select the configuration file. When it is selected, it is the only
file displayed. The file is displayed with the date on which it was recorded and
text, if present.
4. Press [ENTER].
5. Select <STORE>.
6. Cold Start the system. See Cold Start, page 3
System version
This option accesses the information displayed on the initial page of Service Tools.
1. Use the arrow keys to select <SYS VER>.
2. Press [ENTER].
3. Use [↑]or [↓]to scroll through the information.
4. Exit and return to the main menu by pressing [MENU].
Main Menu & Displays
SP-19 Compulite R&D
6
Main Menu & Displays
The Main menu contains the following functions:
•GO - give a go command to the A/B crossfader.
•HOLD - give a hold command to the A/B crossfader.
•RSTR - restart the show from the first memory.
•LOAD - load a show from the diskette.
•CTLR - access controllers to change a controller level or view one of the 3 different
controller displays.
•MAC - access the macro list to view or operate macros.
The Main menu display looks like this:
Figure 2 - Main menu
Giving a Go command
Give the Go command to the A/B crossfader. There is no multifade option available on SP-
19.
1. Press [MENU] until the Main menu is displayed. <GO> is the default selection.
2. If <GO> is not bracketed, use the arrow keys to select. If <GO> is selected skip
this step.
3. Press [ENTER]. A crossfade is initiated on the A/B x-fader. When viewing A/B
X-fader display, the status is shown as <RUN>. See Figure 3.
<GO> HOLD RSTR
L
O
AD
C
TRL MA
C
Main Menu & Displays
Compulite R&D SP-19
7
Giving a Hold command
Give the Hold command to the A/B crossfader.
1. Press [MENU] until the Main menu is displayed.
2. Use the arrow keys to select <HOLD>.
3. Press [ENTER]. The crossfade on the A/B X-fader halts, regardless of the
progression of the fade. This may be viewed on the A/B X-fader display. When
viewing A/B X-fader display, the status is shown as HOLD.
Figure 3- A/B crossfade display
This display shows the memory on A, the memory on B, the status of the crossfader (run or
hold), and the output level of the x-fader. If the crossfader is running this will, of course, be
constantly changing.
Press [MENU] to toggle between the Main menu and the A/B X-fader display.
Rstr
This function restarts the show from the first memory.
1. Press [MENU] until the Main menu is displayed.
2. Use the arrow keys to select <RSTR>.
3. Press [ENTER]. The first memory is faded to the A/B crossfader.
A - #% RUN B - #%
MEM # MEM #
Output Level
x-fader A
X-Fader status Output Level
x-fader B
Memory on A Memory on B
Main Menu & Displays
SP-19 Compulite R&D
8
Load
This function accesses the diskette and allows you to load a new show.
If you are controlling the SP-19 using only the front panel keys, it is not possible to load a
show whose configuration is different than SP-19’s current configuration.
Always record your configuration files and load them before loading a show file. (See Load
configuration, page 5)
1. Press [MENU] until the Main menu is displayed.
2. Use the arrow keys to select <LOAD>.
3. Press [ENTER]. The files on the diskette can be viewed on the LCD display.
4. Use [↑]or [↓]to select a show file.
5. Press [ENTER].
WAIT
followed by asterisks is displayed while the show file is
being loaded. When the load is complete
DONE
is displayed.
6. Press [MENU] to return to the Main menu.
7. Use the <RSTR> function to assign the first memory to A/B and begin your
show.
8. If your show does not begin from the first memory, execute the macro you have
prepared to start the show from a memory other than the first.
Tabla de contenidos
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario