Spacetronik DIO SPD-M777 Manual de usuario

Please read this manual carefully before using the product.

USER MANUAL

Smart Monitor Spacetronik

SPD-M777 / SPD-M775 / SPD-M772

1. Parts and functions

2. Monitor mounting

7" Digital TFT LCD Screen

Speaker

145 - 160 cm

2 . Connecting the system correctly, then hang the monitor on the mounting bracket firmly.

1 . Using the screws to fix the mounting bracket on the wall.

1 2

DIP switches

BUS terminal

IP Connection port

Door bell connection port

SD card slot

(6:CALL)

(8:GND)

(7:VI)

(4:SP)

(3:ISK)

(2:IJK)

(1:IDJ)

(5:MIC)

1 2

1 21 21 2

TALK Button

UNLOCK Button

Microphone

ON ON ON ON

NC100 75 50

IP Connection port

DIP switches

Monitor at the end

of the line

Bit state Setting Bit state Setting

Monitor NOT at

the end of the line

Reserved

1 2

Reserved

1 2

Press anywhere of the screen on monitor in standby mode, the main menu page

will be shown as follows:

Video/Audio

recording

Door station and camera

3. Main menu

4. Basic door release operation

Press CALL button on outdoor station, the indoor monitor rings, meanwhile, the

screen displays the visitor’s image.

Press Answer on monitor, you can talk with the visitor for 100 seconds. Press

Close to end the conversation. If nobody answers the call, the screen will be

turned off automatically after seconds.100

During talking status, press Unlock to unlock the door. ress

Switch camera to switch to extra camera.(If theres extra camera in the

system). Press Close to end the communication.

Press Function, p

’Swi

2 .

1 .

3 .

Time and SD card

Inner Call

Press it to activate

Inner call

Recording

Picture & video

playback

Monitor

Press it to view the

outside

Activate “Do not Disturb”

Activate “Voicemail”

Activate “Do not ring”

Press it to turn off

the screen

Qiuck Commands

Press Monitor on main menu to enter the door camera switching mode, if

multi door stations are installed, you can select the door station or CCTV camera

you want to monitor.

6. Inner call

User in one apartment can call other apartment in the system. Press Inner Call

to enter Inner call page, use t

o select next page, press to call another

monitor.

5. Monitor

7. Record-Picture / Video / Audio

Picture / video record: 3 seconds after the call was received, the monitor will

record a video/picture automatically. Or you can press Function, and then

to record the visitor’s video/picture manually when the monitor in

monitoring or calling state.

(1) .

Audio Record: Audio recording will be activated in two situations.

2.1. When you call other apartments (Inner Call).

2.2. If you select SD card as storage location, the audio recording will be

activated when the door station call the monitor.

( )2 .

Video/Picture/Audio playback: Press Record on main menu to select

Video/picture/Audio playback. Press to select, press to pause, press

delete.

( )3 .

Note:

1.Only supports writing speeds greater

than 4M/S SD card.

2. A new SD card must be formatted by the

monitor before you using it.

3. Without SD card, you could only store 6

picture and 2 audio.

4.Up to 32G SD card.

8.1 Settings-Voicemail

8.2 Volume:

Press Settings on main menu page, press

Volume to enter volume adjusting page.

Day time: 8:00 - 20:59, ringing volume

adjusting range from 0-10.

Night time: 21:00 - 7:59, ringing volume

adjusting range from 0-10.

8.3 Screen settings:

Press Settings on main menu page, press

Color to enter color adjusting page.

8.4 Date & Time:

Press Settings on main menu page, press

Time to enter date & time setting page.

1 .

8.5 Storage- SD card

Press Storage to enter SD card setting

page. Press Format to format the SD

card Press Info to check the SD card

storage information.

8.6 Optional

Press Settings on main menu page, press Optional to enter personalized setting

page. You can adjust

Automatic / manual video recording

Automatic / manual photography

Turn on / off Inner Call

Turn on / off Do Not Disturb

2. Door station & Extra Camera:

If multi door stations and extra cameras

installed in the system, you have to set the

door station and camera quantity. The

default setting is 1 door station and 0

camera.

1.Personalized settings:

3. Ringtone:

If multi door stations and extra cameras

4. Network (Divert Call Function,

With IP Module Only):

Network call disable: Calls from door

station will not diverted.

Router

Power Supply

CAT 5

IP Module

Mobile phone

MonitorDoor station

9. Basic Wringing (With IP module)

10. Specifications

Power supply for monitor:

Power consumption:

Monitor screen:

Wiring:

Dimensions:

DC 24V

Standby 15mA, working 350mA

7 inch digital color TFT

2 wires, non-polarity

5. Language

Press Settings icon on main menu page,

press Language to enter language setting

page. There’re twelve languages for

optional: English, German, Italian,

Spanish, Greek, French, Russian, Turkish

and Dutch., etc

6.Password

Room number password is

1111111(default). Modify room

number password operation: input old

password, setting new password. If

you forget the room number password,

you can press button and input

1111111, recover the room number

password to 1111111.

Produced in ChRL for: DMTrade Mikołaj Tomaszewski; Wiśniowa 36; 64-000 Kościan; Poland

NIP: PL 6981681757 sklep@dmtrade.pl Tel.: +48 661082052 +48 785082052

The WEEE symbol (the crossed-out wheeled bin) using indicates that this product is not home waste. Appropriate waste management aids in avoiding consequences

which are harmful for people and environment and result from dangerous materials used in the device, as well as improper storage and processing. Segregated

household waste collection aids recycle materials and components of which the device was made. In order to get detailed

information about recycling this product please contact your retailer or a local authority.

M777 200 x 130 x 18 mm

M775 185 x 165 x 21 mm

M772 184 x 166 x 23 mm

Este manual sirve para los siguientes modelos

Tabla de contenidos