SOYO SY-K7ADA Manual de usuario

SY-K7ADA

Motherboard

Quick Start Guide

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

SOYO™

SY-K7ADA Motherboard

Socket 462 for AMD

Athlon/Duron

processors

ALI MAGiK1 AGP/PCI Motherboard

200/266 MHz Front Side Bus supported

ATX Form Factor

Trademarks:

Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of

their owners.

Product Rights:

All names of the product and corporate mentioned in this publication are used for identification

purposes only. The registered trademarks and copyrights belong to their respective companies.

manual may be reproduced, transmitted, transcribed, translated into any other language, or

stored in a retrieval system, in any form or by any means, such as by electronic, mechanical,

magnetic, optical, chemical, manual or otherwise, without permission in writing from Soyo

Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to amend the manual or revise the specifications of the product

described in it from time to time without obligation to notify any person of such revision or

amend. The information contained in this manual is provided to our customers for general use.

Customers should be aware that the personal computer field is subject to many patents. All of

our customers should ensure that their use of our products does not infringe upon any patents. It

is the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and not to

infringe upon or to cause others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide can help system manufacturers and end users in setting up and installing

the Motherboard. Information in this guide has been carefully checked for reliability; however,

to the correctness of the contents there is no guarantee given. The information in this document

is subject to amend without notice.

For further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

K7ADA Serial - Version 1.2 - Edition: May 2001

* These specifications are subject to amend without notice

SY-K7ADA

Quick Start Guide

Introduction

Congratulations on your purchase of the

SY-K7ADA

Motherboard. This

QuickStartGuide

illustrates the steps for installing and setting up your new Motherboard.

This guide provide users with the basic steps of Motherboard setting and operation. For

further information, please refer to the

SY-K7ADAUser’sGuide

that came with your

Motherboard.

Unpacking

When unpacking the Motherboard, check for the following items:

The SY-K7ADA ALi MAGiK1 AGP/PCI Motherboard

The Quick Start Guide

The Installation CD-ROM

SOYO Bonus Pack CD-ROM

One IDE Device ATA33/ 66/100 Flat Cable

One Floppy Disk Drive Flat Cable

One Heat Sink Compound

SY-K7ADA Quick Start Guide

Introduction

SY-K7ADA Motherboard Layout

PRT

PS/2 KB

Connector

PS/2 Mouse

Connector

ATX Power

AOUT

AIN

AMIC

AGAME

COMA

COMB

USB 1_2

SDRAM

M1647

AGP Slot

Lithium

Battery

JP1

RJ2

RJ3

CDIN1

PCI Slot #5

Flash BIOS

PCI Slot #1

PCI Slot #4

PCI Slot #3

PCI Slot #2

FLP

IDE 1

IDE 2

M1535D+

FJ1

RJ1

VJ2

VJ1

ALi

JP5

JP10

WOL

Header

Sigmatel

STAC9700

ALi

M5879

ALi

M5819

SY-K7ADA

Quick Start Guide

Introduction

Key Features

Supports Socket A (Socket 462)

AMD® processors

¡X

Supports 200MHz Front Side Bus

Athlon(750MHz~1.3GHz)

Duron (600MHz~900MHz)

¡X

Supports 266MHz Front Side Bus

Athlon(1GHz~1.33GHz)

PC99, ACPI 1.0b

Ultra DMA33/66/100 (ATA 33/66/100)

EIDE

Supports Wake-On-LAN (WOL)

Power-on by RTC alarm

Supports onboard hardware

monitoring and includes Hardware

Doctor

utility

Supports three PC2100/PC1600

DDR SDRAM DIMMs up to 3GB

memory space

Supports multiple-boot function

5 x 32-bit bus mastering PCI slots

fully compliant with PCI Rev2.2

1 x 32-bit AGP 1X/2X/4X sideband

function slot, supports AGP

specification V2.0

6 x USB ports onboard compliant

with open HCI 1.0a specification

1 x IrDA port supports IrDA 1.0(SIR),

IrDA1.1 (FIR) & Sharp-IR

ATX power connector

Easy CPU settings in BIOS with the

“SOYO COMBO setup”

Supports Suspend to RAM and

suspend to Disk

Supports on-board AC97 Audio

Supports CPU voltage adjustment

by DIP switch

Supports CPU Multiplier selection by

DIP switch

Supports CPU frequency adjustment

by DIP switch

SY-K7ADA Quick Start Guide

Hardware

Installation

To avoid damage to your Motherboard, please follow these simple rules while

handling this equipment:

Before handling the Motherboard, ground yourself by touching an unpainted portion of

the system's metal chassis.

Remove the Motherboard from its anti-static packaging. Hold the motherboard by the

edges and avoid touching its components.

Check the Motherboard for damage. If any chip appears to be loose, press carefully

to seat it firmly in its socket.

Follow the directions in this section which is designed to guide you through a quick and

correct method to install your new

SY-K7ADA

Motherboard. For detailed information, please

refer to the

SY-K7ADAMotherboardUser'sguideandTechnical Reference

online manual in

the CD-ROM package that came with your Motherboard.

Gather and prepare all necessary components to complete the installation successfully:

AMD® Socket462 processor with built-in CPU cooling fan (boxed type)

DDR RAM module(s)

Computer case with adequate power supply unit

Monitor

PS/2 Keyboard

Pointing Device (PS/2 Mouse)

Speaker(s) (optional)

Disk Drives: HDD, CD-ROM, Floppy drive…

External Peripherals: Printer, Plotter, and Modem (optional)

Internal Peripherals: Modem and LAN cards (optional)

Note: 1.

If you want to use an external speaker connected to "Line-out" port, please make

sure to use an "amplified speaker" that can generate proper output sound volume.

SY-K7ADA

Quick Start Guide

Hardware

Installation

Install the Motherboard

To perform the installation of your new

SY-K7ADA

Motherboard, follow the steps below:

Step 1. CPU Installation

Mark your CPU Frequency:

Recordtheworkingfrequencyofyour CPU that

shouldbeclearlymarkedon the CPU cover.

200MHz FSB Athlon CPU

750MHz(100x 7.5) 800MHz(100x8.0) 850MHz(100x8.5) 900MHz (100x9.0)

950MHz(100x 9.5) 1000MHz (100x 10.0) 1.1GHz(100x11.0) 1.2GHz(100x12.0)

1.3 GHz (100 x 13.0)

200MHz FSB Duron CPU

600MHz(100x 6.0) 650MHz(100x6.5) 700MHz(100x7.0) 750MHz (100x7.5)

800MHz(100x 8.0) 850MHz(100x8.5) 900MHz(100x9.0)

266MHz FSB Athlon CPU

1GHz(133x 7.5) 1.13GHz(133 x8.5) 1.2GHz(133x9.0) 1.33GHz(133x10.0)

CPU Mount Procedure:

To mount the AMD

& Athlon/Duron

processor that you

have purchased separately, follow these instructions.

Lift the socket handle up to a vertical position.

Align the blunt edge of the CPU with the matching pinhole edge on the socket.

Seat the processor in the socket completely and without forcing.

Then close the socket handle to secure the CPU in place.

Remember to connect the CPU Cooling Fan to the appropriate power

connector on the Motherboard.

Thefanisakeycomponentthatstabilizesthe

system.Itpreventstheequipmentfromoverheatingandprolongsthelifeof

yourCPU.

SY-K7ADA Quick Start Guide

Hardware

Installation

Step 2. Connections to the Motherboard

This section tells how to connect internal peripherals and the power supply to the Motherboard.

The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis

Fan, Front Panel Devices (Suspend LED Internal Speaker, Reset Button and IDE LED

Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.

For more details on connecting internal and external peripherals to your new SY-K7ADA

Motherboard, please refer to

SY-K7ADAMotherboardUser'sGuideandTechnical

Reference

online manual on the CD-ROM.

Connectors and Plug-ins

Standard IrDA (Infrared Device Header): SIRCON Wake-On-LAN Header: JP10

Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin1 Pin2 Pin3

+5V FIR IRRX GND IRTX OVCROFF 5VSB GND PME#

USB3_4: USB3 USB3_4: USB4

Pin1 Pin2 Pin3 Pin4 Pin6 Pin7 Pin8 Pin9 Pin10

+5V Data(-) Data(+) GND +5V Data(-) Data(+) GND GND

USB5_6: USB5 USB5_6: USB6

Pin1 Pin2 Pin3 Pin4 Pin6 Pin7 Pin8 Pin9 Pin10

+5V Data(-) Data(+) GND +5V Data(-) Data(+) GND GND

CPU Cooling Fan:

CPUFAN Chassis Fan: CHAFAN SYS Cooling Fan:

SYSFAN

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3

GND +12V SENSOR PWM2 +12V SENSOR GND +12V NC

CDLine-in:CDIN1Pin1 Pin2 Pin3 Pin4

ConnecttheCDLine-incordfromtheCD-ROMdeviceto

thematchingheaderCDIN1 CD_L GND GND CD_R

Power LED

Pin11 Pin12 Pin13

LEDNCGND

Speaker

Pin17 Pin18 Pin19 Pin20

Power NC NC Speakerout

HDD LED PWRBT RESET Suspend LED

Pin9 Pin10 Pin4 Pin5 Pin1 Pin2 Pin7 Pin8

Power HDDLED PWRBTN GND PowerRST GND Power SP_LED

ATXPOWEROn/Off:PWRBT

Connect your power switch to this header (momentary switch type).

To turn off the system, please press this switch and hold down for longer than 4

seconds.

1112131415161718

SY-K7ADA

Quick Start Guide

Hardware

Installation

ATXPowerSupply:ATXPW

AttachtheATXPowercabletothisconnector.(ThismotherboardrequiresanATXpowersupply,anAT

powersupplycan NOTbeused.)

WhenusingthePower-OnbyPS/2Keyboardfunction,pleasemakesuretheATXpowersupplyisableto

provideatleast720mAonthe5VStandbylead(5VSB)inordertomeetthestandardATXspecifications.

Step 3. Configure Memory

Supports PC2100/PC1600 DDR(Double Data Rate) SDRAM up to 3 DIMMs and using

system memory up to 3GB. Supports symmetrical and asymmetrical DDR addressing.

Memory Configuration Table

Number of Memory Modules DIMM 1 DIMM 2 DIMM3

RAM Type DDR SDRAM

Memory Module Size 4/16/64/128/256/512 Mbit

Note: This Motherboard can only support 2 pcs of PC2100 DDR module, we

suggest using DIMM1 and DIMM2 for PC2100 DDR module.

Step 4. Multiplier Adjustment Setting (RJ1)

For certain AMD



CPUs, the multiplier is not locked such that setting a multiplier higher

than specified on the CPU is possible. For technical details read the following:

RefertothefollowingtabletosettheFrequencyMultiplierofyourCPU.

Frequency Multiplier

Setting RJ2 RJ3

Auto Short Pin1-2 Short Pin1-2

Manual Short Pin2-3 Short Pin2-3

123

SY-K7ADA Quick Start Guide

Hardware

Installation

IfyousetratiotomanualandconfiguretheRJ1DIPswitchtothesettingsthatmatchyourCPUspeed,as

followtable:

RJ1 1 2 3 4 RJ1 1 2 3 4

5On On Off On 9On On Off Off

5.5 Off On Off On 9.5 Off On Off Off

6On Off Off On 10 On Off Off Off

6.5 Off Off Off On 10.5 Off Off Off Off

7On On On Off 11 On On On On

7.5 Off On On Off 11.5 Off On On On

8On Off On Off 12 On Off On On

8.5 Off Off On Off 12.5 Off Off On On

Note: SOYO does not guarantee system stability if the user over clocks the

system. Any malfunctions due to over-clocking are not covered by the warranty.

Step 5. Enable/Disable Power-On by Keyboard (JP1)

You may choose to enable the Power-On through Keyboard function by shorting pin 2-3 on

jumper JP1; or short pin 1-2 to disable this function.

Power-On by

Keyboard Enable Disable

JP1 Setting

Short pin 2-3 to

enable the Power-

On by Keyboard

function.

Short pin 1-2 and

the Power-On by

Keyboard function is

disabled.

Important: When using the Power-On by Keyboard function, please make sure the

ATX power supply is able to provide at least 720mA on the 5V Standby lead (5VSB)

in order to meet the standard ATX specification.

Step 6. The synchronous / asynchronous clock mode between CPU

and memory interface setting

The FSB Frequency can also be set through DIP switch FJ1 or BIOS and it may therefore

differ from the Frequency the CPU specifies. Doing so may however force your CPU to

operate out of its specifications and therefore SOYO can not guarantee the proper

functioning of your system.

Refer to the following table:

123

Otros manuales para SY-K7ADA

Tabla de contenidos

Otros manuales de Placa madre de SOYO

SOYO

SOYO SY-6IZM Manual de usuario

SOYO

SOYO 6BE+ Manual de usuario

SOYO

SOYO SY-7VDA Manual de usuario

SOYO

SOYO 6KD Manual de uso y cuidado

SOYO

SOYO SY-7VBA 133 Manual de usuario

SOYO

SOYO SY-V6BE+ Manual de usuario

SOYO

SOYO SY-P4X400 DRAGON Lite Manual de usuario

SOYO

SOYO SY-KT600 DRAGON Plus Manual de usuario

SOYO

SOYO SY-P4I845PEISA Manual de usuario

SOYO

SOYO Pentium P54C Manual de uso y cuidado

SOYO

SOYO SY-7VBA 133 Manual de usuario

SOYO

SOYO DRAGON Lite SY-KT333 Manual de usuario

SOYO

SOYO SY-K7V DRAGON Plus Manual de usuario

SOYO

SOYO Motherboard SY-6ZB Manual de usuario

SOYO

SOYO SY-7VCA2 Manual de usuario

SOYO

SOYO SY-K7V DRAGON Plus Manual de usuario

SOYO

SOYO SY-P4IS2 Manual de usuario

SOYO

SOYO SY-K7VMP2 Manual de usuario

SOYO

SOYO SY-7SBB Manual de usuario

SOYO

SOYO SY-6BB V1.0 Manual de usuario

SOYO

SOYO SY-6BA+ III Manual de uso y cuidado

SOYO

SOYO SY-D6IBA Manual de usuario

SOYO

SOYO Super 7 SY-5EMA Manual de usuario

SOYO

SOYO SY-7IWM-X Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario