SOYO SY-7VEM Manual de usuario

SY-7VEM

Motherboard

Quick Start Guide

Hardware

Installation

Quick BIOS

Setup

Introduction

The SOYO CD

SOYO™

SY-7VEM Motherboard

Socket 370 for VIA Cyrix, Intel PIII & Celeron processors

VIA PLE133 AGP/PCI Motherboard

66/100/133 MHz Front Side Bus supported

Micro-ATX Form Factor

Trademarks:

Soyo is the registered trademark of Soyo Computer Inc. All trademarks are the properties of

their owners.

Product Rights:

All names of the product and corporate mentioned in this publication are used for identification

purposes only. The registered trademarks and copyrights belong to their respective companies.

manual may be reproduced, transmitted, transcribed, translated into any other language, or

stored in a retrieval system, in any form or by any means, such as by electronic, mechanical,

magnetic, optical, chemical, manual or otherwise, without permission in writing from Soyo

Computer Inc.

Disclaimer:

Soyo Computer Inc. makes no representations or warranties regarding the contents of this

manual. We reserve the right to amend the manual or revise the specifications of the product

described in it from time to time without obligation to notify any person of such revision or

amend. The information contained in this manual is provided to our customers for general use.

Customers should be aware that the personal computer field is subject to many patents. All of

our customers should ensure that their use of our products does not infringe upon any patents. It

is the policy of Soyo Computer Inc. to respect the valid patent rights of third parties and not to

infringe upon or to cause others to infringe upon such rights.

Restricted Rights Legend:

Use, duplication, or disclosure by the Government is subject to restrictions set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at

252.277-7013.

About This Guide:

This Quick Start Guide can help system manufacturers and end users in setting up and installing

the Motherboard. Information in this guide has been carefully checked for reliability; however,

to the correctness of the contents there is no guarantee given. The information in this document

is subject to amend without notice.

For further information, please visit our Web Site on the Internet. The address is

"http://www.soyo.com.tw".

7VEM Serial - Version 1.2 - Edition: May 2001

* These specifications are subject to amend without notice

SY-7VEM

Quick Start Guide

Introduction

Congratulations on your purchase of the

SY-7VEM

Motherboard. This

QuickStartGuide

illustrates the steps for installing and setting up your new Motherboard.

This guide provides all users with the basic steps of Motherboard setting and operation. For

further information, please refer to the

SY-7VEMMotherboard Users’Guide

that came with

your Motherboard.

Unpacking

When unpacking the Motherboard, check for the following items:

The SY-7VEM PLE133 AMR/PCI/ISA Motherboard

The Quick Start Guide

The Installation CD-ROM

SOYO Bonus Pack CD-ROM

One IDE Device ATA 66 Flat Cable

One Floppy Disk Drive Flat Cable

One serial port flat cable with a 9-pin connector

SY-7VEM Quick Start Guide

Introduction

SY-7VEM Motherboard Layout

(Optional)

PRT

PS/2 KB

Connector

PS/2 Mouse

Connector

ATX Power

AOUT

AIN

AMIC

AGAME

COM1

VGA

USB 1_2

Lithium

Battery

JBAT1

PCI1

PCI3

SL1

PCI2

FDC

IDE 1

IDE 2

Socket 370

JWOL1

VT82C686A

VT8601A

CD_IN

AMR

COM 2

MPF

39SF020

VT1611A

J25

SY-7VEM

Quick Start Guide

Introduction

Key Features

Supports Intel® processors

- FSB 66MHz: Celeron



(400-700MHz)

- FSB 100MHz: Pentium® III (500-

850MHz)

- FSB 133MHz: Pentium® III (533MHz-

933MHz)

Supports Via Cyrix processors

- FSB 100MHz: Cyrix III (500MHz-

600MHz)

- FSB 133MHz: Cyrix III (533MHz-

600MHz)

Supports 66/100/133 MHz Front Side

Bus Frequency

Auto-detect CPU voltage

PC99, ACPI

Ultra DMA33/66 (ATA 33/66)

Supports Wake-On-LAN (WOL)

Power-on by modem and alarm

Support onboard VGA

Supports onboard hardware monitoring

Supports 5 sets of voltage monitoring

Supports multiple-boot function

Supports Audio Modem Riser slot (AMR

1.0 compliant) *

3 x 32-bit bus master PCI slots

1 x 16-bit ISA slot.

4 x USB ports onboard

ATX power connector

*Becausethis boardcomes withsoftware Audio(AC97) onboard, theAudio functionin AMRis notrelevant.

Iftheuser wantsto useaModem Risercard (MR)makesure tousea

Secondary

modeMR,

PRIMARY

modeMRs are

NOT

Supported.

TheCPUFan willnotturn off duringstandbymode.

SY-7VEM Quick Start Guide

Hardware

Installation

To avoid damage to your Motherboard, please follow these simple rules while

handling this equipment:

Before handling the Motherboard, ground yourself by touching on to an unpainted

portion of the system's metal chassis.

Remove the Motherboard from its anti-static packaging. Hold the motherboard by the

edges and avoid touching its components.

Check the Motherboard for damage. If any chip appears to be loose, press carefully

to seat it firmly in its socket.

Follow the directions in this section which is designed to guide you through a quick and

correct method to install your new

SY-7VEM

Motherboard. For detailed information, please

refer to the

SY-7VEMMotherboardUser'sguideandTechnical Reference

online manual on

in the CD-ROM package that came with your Motherboard.

Gather and prepare all necessary components to complete the installation successfully:

Socket370 processor with built-in CPU cooling fan (boxed type)

SDRAM module(s)

Computer case with adequate power supply unit

Monitor

PS/2 Keyboard

Pointing Device (PS/2 Mouse)

Speaker(s) (optional)

Disk Drives: HDD, CD-ROM, Floppy drive…

External Peripherals: Printer, Plotter, and Modem (optional)

Internal Peripherals: Modem and LAN cards (optional)

Note: 1.

If you want to use an external speaker connected to "Line-out" port, please make

sure to use an "amplified speaker" that can generate proper output sound volume.

SY-7VEM

Quick Start Guide

Hardware

Installation

Install the Motherboard

To perform the installation of your new

SY-7VEM

Motherboard, follow the steps below:

Step 1. CPU Installation

Mark your CPU Frequency:

RecordtheworkingfrequencyofyourCPUthat

shouldbeclearlymarkedontheCPUcover.

FSB66MHz

400MHz(66x6.0) 466MHz(66x7.0) 533MHz(66x8.0) 600MHz(66x9.0) 667MHz(66x10.0)

433MHz(66x6.5) 500MHz(66x7.5) 566MHz(66x8.5) 633MHz(66x9.5) 700MHz(66x10.5)

FSB100MHz

500MHz(100x5.0) 600MHz(100x6.0) 700MHz(100x7.0) 800MHz(100x8.0)

550MHz(100x5.5) 650MHz(100x6.5) 750MHz(100x7.5) 850MHz(100x8.5)

FSB133MHz

533MHz(133x4.0) 667MHz(133x5.0) 800MHz(133x6.0) 933MHz(133x7.0)

600MHz(133x4.5) 733MHz(133x5.5) 866MHz(133x6.5)

CPU Mount Procedure:

To mount the Pentium® & Celeron

processor & VIA

Cyrix processor that you have purchased separately, follow these instructions.

Lift the socket handle up to a vertical position.

Align the blunt edge of the CPU with the matching pinhole edge on the socket.

Seat the processor in the socket completely and without forcing.

Then close the socket handle to secure the CPU in place.

Remember to connect the CPU Cooling Fan to the appropriate power

connector on the Motherboard.

Thefanisakeycomponentthatstabilizesthe

system.Itpreventstheequipmentfromoverheatingandprolongsthelifeof

yourCPU.

cket370

SY-7VEM Quick Start Guide

Hardware

Installation

Step 2. Connections to the Motherboard

This section tells how to connect internal peripherals and the power supply to the Motherboard.

The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis

Fan, Front Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On-

LAN card, VGA card, Sound Card, and other devices.

For more details on connecting internal and external peripherals to your new SY-7VEM

Motherboard, please refer to

SY-7VEMMotherboardUser'sGuideandTechnical Reference

online manual on the CD-ROM.

Connectors and Plug-ins

Wake-On-LANHeader: JWOL1 StandardIrDA (Infrared Device Header): J1

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 Pin4 Pin5

5V-SB GND Ring VCC NC IRRX GND IRTX

JUSB1_#1 JUSB1_#2

Pin1 Pin3 Pin5 Pin7 Pin9 Pin2 Pin4 Pin6 Pin8 Pin10

+5V Data(-) Data(+) GND GND +5V Data(-) Data(+) GND GND

CPU Cooling Fan: JFAN1 ChassisFan:JFAN2

Pin1 Pin2 Pin3 Pin1 Pin2 Pin3

SENSOR 12V GND SENSOR 12V GND

CD -IN: CD_IN Pin1 Pin2 Pin3 Pin4

Connect the CD Line-in cord from the CR-ROM device to the

matching connector CD_IN LG G R

PowerLED

Pin1 Pin2 Pin3

5V NCGND

Speaker

Pin1 Pin2 Pin3 Pin4

5V NC NC Speakerout

HDDLED PWRBT RESET

Pin1 Pin2 Pin1 Pin2 Pin1 Pin2

LEDAnode LEDCathode Power On/Off GND ControlPIN GND

ATXPowerOn/Off:PWRBT

Connectyourpowerswitchtothisheader(momentaryswitchtype).

Toturnoff the system, press this switch andholddownforlongerthan4seconds.

ATXPowerSupply:ATXPW

AttachtheATXPowercabletothisconnector.(ThismotherboardrequiresanATXpowersupply,anAT

powersupplycan NOT beused.)

WhenusingthePower-OnbyPS/2Keyboardfunction,pleasemakesuretheATXpower supply isableto

provideatleast720mAonthe5VStandbylead(5VSB)inordertomeet the standardATXspecifications.

Power LED

Speaker

Reset

PWRBT

HDD LED

1 1

SY-7VEM

Quick Start Guide

Hardware

Installation

Step 3. Configure Memory

Your board comes with two DIMM sockets, providing support for up to 512MB of main

memory using unbuffered and registered DIMM modules from 8MB to 256MB. On this

motherboard, DRAM speed can be set independent from the CPU front side bus speed.

Depending on the DRAM clock speed setting in the BIOS setup, appropriate memory

modules must be used. For 66MHz DRAM speed, use PC66 memory; for 100MHz DRAM

speed, use PC100 memory; for 133MHz DRAM speed, use PC133 memory.

Memory Configuration Table

Number of Memory

Modules DIMM 1 DIMM 2

RAM Type SDRAM

Memory Module Size (MB) 8/16/32/64/128/256 MB

Note:Always install memory modules in the order prescribed in this table.

CMOS Clear (JBAT1)

In some cases the CMOS memory may contain wrong data, follow the steps below to clear

CMOS memory.

Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JBAT1. This

jumper can be easily identified by its white colored cap.

Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.

CMOS Clearing Clear CMOS Data Retain CMOS Data

JBAT1Setting Shortpin2-3for

atleast5secondsto

clearthe CMOS

Shortpin1-2to

retain new settings

Note: You must unplug the ATX power cable from the ATX power connector when

performing the CMOS Clear operation.

123

SY-7VEM Quick Start Guide

Quick BIOS

Setup

Quick BIOS Setup

This Motherboard does not require any hardware jumpers to set the CPU operating

frequency.

Aftercompletionofhardwareinstallation,turnthepowerswitchon,thenpressthe

<DEL>

keywhile

thesystemdiagnosticischeckingtoenter theAwardBIOSSetupprogram.TheCMOSSETUP

UTILITYwillbedisplayedonscreen.Thenfollow these steps toconfiguretheCPUsettings.

Step 1. Select [STANDARD CMOS SETUP]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.

Step 2. Select [LOAD SETUP DEFAULT]

Select the “LOAD SETUP DEFAULT”menu and type “Y”at the prompt to load the BIOS

optimal setup.

Step 3. Select [SAVE & EXIT SETUP]

Press

<Enter>

to save the new configuration to the CMOS memory, and continue with the

boot sequence.

Otros manuales para SY-7VEM

Tabla de contenidos

Otros manuales de Placa madre de SOYO

SOYO

SOYO Super 7 V1.0 Manual de usuario

SOYO

SOYO SY-K7VTA-B Manual de usuario

SOYO

SOYO SY-6VBA 133 Manual de usuario

SOYO

SOYO SY-P4X400 DRAGON Lite Manual de usuario

SOYO

SOYO SY-6VZA Manual de usuario

SOYO

SOYO SY-D6IGA Manual de uso y cuidado

SOYO

SOYO SY-P4I845PE Manual de usuario

SOYO

SOYO SY-7IWB V1.0 Manual de usuario

SOYO

SOYO SY-7VDA Manual de usuario

SOYO

SOYO SY-7VCM Manual de usuario

SOYO

SOYO 6KM Series Manual de uso y cuidado

SOYO

SOYO SY-KT333 DRAGON Plus Manual de usuario

SOYO

SOYO SY-7VCM Manual de usuario

SOYO

SOYO SY-K7ADA Manual de usuario

SOYO

SOYO 82430 TX Manual de uso y cuidado

SOYO

SOYO SY-6BE Manual de usuario

SOYO

SOYO SY-7IWA-F Manual de usuario

SOYO

SOYO SY-6IZM/3 Manual de usuario

SOYO

SOYO SY-K7VLM-B Manual de usuario

SOYO

SOYO SY-5EMA Pro Super 7 Manual de uso y cuidado

SOYO

SOYO SY-6BA+ Manual de uso y cuidado

SOYO

SOYO SY-5EHM Manual de uso y cuidado

SOYO

SOYO SY-5EMA+ Manual de usuario

SOYO

SOYO SY-7IWM-X Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario