SoundPeats Mini Pro Manual de usuario

SOUNDPEATS

FAQ

BLUETOOTH-------------------------------------------------------------------- 2

SOUND--------------------------------------------------------------------------- 4

CHARGING---------------------------------------------------------------------- 5

TOUCH CONTROL------------------------------------------------------------ 6

CUSTOMER SERVICE TEAM---------------------------------------------- 6

SOUNDPEATS

BLUETOOTH

How to pair SoundPEATS Mini Pro?

1. Open the charging case lid and take out both earbuds, then remove the

insulating film and put them back.

2. The earbuds automatically pair to each other after being taken out from the

charging case. LED indicator on main earbuds flashes in red and white, the

second earbud stays in white.

3. Activate Bluetooth on the device, and choose"SOUNDPEATS Mini Pro" on

Bluetooth list to pair.

How to reset SoundPEATS Mini Pro?

(Try the following steps if you fail building connection between two earbuds, or

between earbuds and device.)

1. Clear the pairing record from all your devices.

2. Place back both earbuds into charging case and make sure they are in

charging status.(Red lights are keeping on.)

3. Press and hold both buttons for 10s until both LEDs flash in red and while

twice, reset complete.

Why does the sound of the earbuds cut or noise occur?

Reasons

Workarounds

Case 1

When using the earbuds close to personal computers,

Wi-Fi routers, microwave ovens, refrigerators, etc.

Refrigerators, microwave ovens, Wi-Fi routers, personal

computers, etc. are devices that emit radio waves.

The earbuds may be affected by these radio waves when

using them in a location with a mixture of multiple radio

waves.

Please use the earbuds away

from Wi-Fi routers, personal

computers, microwave

ovens, refrigerators, etc. in

order to avoid radio wave

interference.

SOUNDPEATS

Case 2

When using the Bluetooth device in the pocket of the

chest or pants, or a bag while listening to the audio.

If the engine ear is diagonal to the Bluetooth device, it will

affect the Bluetooth signal. As human body is the biggest

source of signal blocking.

When put the Bluetooth

device in a pocket or bag,

move the Bluetooth device to

a place where there are no

obstacles between Bluetooth

device and earbuds (such as

the human body) for

Bluetooth communication.

Case 3

When using the earbuds closes to the other Bluetooth

devices.

The earbuds may be affected by these radio waves when

using them in a location with a mixture of multiple radio

waves.

Turn off the Bluetooth

function of the other

Bluetooth devices.

Case 4

When using the device away from the earbuds, such as

in a different room.

Bluetooth communication gradually becomes weaker the

further away Bluetooth earbuds are placed from a Bluetooth

player.When using Bluetooth earbuds and a Bluetooth

player in different rooms with the doors closed, Bluetooth

communication may be weak.

Keep the Bluetooth earbuds

as close to the Bluetooth

player as possible.

Case 5

When playing music in Game mode.

Please exit the game mode

when you listen to music.

Case 6

When a lot of applications are running at the same time

when use the Bluetooth function.

Quit apps which you are not

using on the device to reduce

the load.

What can I do if the earbuds stopped connecting to my device?

1. Clear the pairing record between the earbuds and all of the previous

devices.

2. Try to clear some pairing names on the Bluetooth list of the device and

restart it then.

3. Put the earbuds into the charging case to reset.

4. Take the earbuds out of the charging case and leave some time for them to

pair with each other. Then please open the Bluetooth of your device to

connect.

What can I do if the left earbud and the right earbud won’t work

together?

SOUNDPEATS

1. Please use a bit of light sandpaper or microfiber cloth with a bit of rubbing

alcohol to clean the charging connectors to ensure the earbuds charge well.

2. Put them into the charging case to reset.

What can I do if the earbuds connect to my phone, but not my

computer?

1. UNPAIR the earbud from the phone, then the earbuds will lose Bluetooth

connection to the phone and enter into pairing mode.

2. Put the earbuds into the charging case to reset.

3. Take them out of the case, then open the Bluetooth of your computer to

connect.

4. If those do not help, you may need to update your computer's Bluetooth

driver. There is no driver for the earbuds. Bluetooth drivers must come from the

specific manufacturer for your exact computer model. Please download and

install the appropriate Bluetooth driver from the computer vendor's website,

then restart your system before attempting to pair and connect to

SoundPEATS earbuds.

SOUND

Why does the volume of the earbuds reduce after using a period of

time?

It may be caused by the sound hole being blocked by foreign objects. Please

try to gently clean off the screen with a little alcohol to avoid dust or secretions

blocking.

What can I do if one earbud is quieter than the the other?

1. Please try to gently clean off the screen with a little alcohol to avoid dust or

secretions blocking.

1. Please change other songs or videos. For some songs and videos, the

sound effect is unstable.

2. Please change other devices. You can try this way:

- UNPAIR and delete from your original device

- Pair to a new device and play music

SOUNDPEATS

- UNPAIR and delete from this new device

- Pair back with original device

3. Try to reset the earbuds.

Why the other side could not hear me when calling?

1. Please choose to pick up phone calls via the earbuds.

2. Please do not mute the phone calls.

3. Please clean the Mic holes to avoid dust or secretions blocking.

4. Please kindly adjust the volume through the earbuds and devices.

5. If you are using the earbuds with an Android phone, please check the

settings to see if you have allowed both phone audio and media audio to be

transmitted through the earbuds.

6. Please change other devices to have a try.

How does the ANC mode work?

Press and hold the left MFB for 1.5 seconds, switch from Normal mode/ ANC

on/ Pass through mode.

How does the Game mode work?

Mini Pro adopts the latest technology to ensure low latency in game mode and

make sure the sound sync with the image.

Triple tap on the left MFB to activate the game mode with a voice prompt

“Game Mode” and deactivate the mode with a prompt “Exit Game Mode”.

CHARGING

What does the LED inside the charging case tell?

The LED flashes slowly while charging the case.

Red light Less than 20%

Yellow light 20%-69%

Green light 70%-99%

SOUNDPEATS

Green light stays on 100%

What should I do if the charging case won’t charge?

Please try to use another known working charging cable to charge

the charging case for more than 10 hours through your computer. Compared

to other electronics, the headphones are low power products. Hence for

charging safety, please do not use fast charger.

What can I do if any earbud stopped charging?

When you put the earbuds into the case and you will see the red light on the

earbuds when charging. If no light comes on, please use a bit of light

sandpaper or microfiber cloth with a bit of rubbing alcohol to clean the charging

connectors and try to adjust the earbuds to ensure the red light is on.

Why are the earbuds still connected to my phone after placing back

into the case?

1. The charging case is out of battery. The case will not turn off the earbuds if

the case battery is dead.

2. Please make sure the earbuds sit well in the charging case, and the

charging connectors on both the earbuds and charging case are clean.

3. Please charge the earbuds and case at least once per 3 months when not

in use for a long time.

The battery life is not as advertised?

A single charge will not give you 21 hours playtime constantly. The earbuds

work around 7 hours per charge will not normal mode, 5 hours per charge with

ANC mode. The charging case provides another 2 recharges.

TOUCH CONTROL

What can I do if the touch controls do not work always?

SOUNDPEATS

1. Please touch the middle of the control area, and keep your hands dry, the

earbuds may not response on wet fingers.

2. Please try to skip songs for more times to find your ideal frequency to

control the earbuds.

3. Please touch the control area with different forces/angles/time to see if it

works.

4. Another way for you to have a try: discharge the earbuds, then charge and

reset.

CUSTOMER SERVICE TEAM

What should I do if the problem about the earbuds is not mentioned

in this FAQ?

If there is no solution for your problem in this FAQ, please feel free to contact

our Customer Service Team and we will provide you a solution as soon as

possible. If we confirmed that the problem couldn't be solved, we will apply the

replacement or refund for you. SoundPEATS provides an 12-month warranty

for every product. Your satisfaction is always greatly important to us.

Tabla de contenidos

Otros manuales de Auriculares de SoundPeats

SoundPeats

SoundPeats Q Manual de usuario

SoundPeats

SoundPeats T3 Manual de usuario

SoundPeats

SoundPeats Mini HS Guía de instalación

SoundPeats

SoundPeats TrueAir Manual de usuario

SoundPeats

SoundPeats Engine 4 Manual de usuario

SoundPeats

SoundPeats Truengine 3 SE Manual de usuario

SoundPeats

SoundPeats Mini Pro HS Guía de instalación

SoundPeats

SoundPeats T3 Manual de usuario

SoundPeats

SoundPeats Air3 pro Manual de usuario

SoundPeats

SoundPeats Air3 Deluxe Manual de usuario

SoundPeats

SoundPeats Free2 classic Manual de usuario

SoundPeats

SoundPeats Capsule3 Pro Manual de usuario

SoundPeats

SoundPeats H1 Manual de usuario

SoundPeats

SoundPeats Mini Pro HS Manual de usuario

SoundPeats

SoundPeats TrueFree+ Manual de usuario

SoundPeats

SoundPeats Air3 Deluxe Guía de instalación

SoundPeats

SoundPeats TrueAir2 Manual de usuario

SoundPeats

SoundPeats H2 Manual de usuario

SoundPeats

SoundPeats H2 Manual de usuario

SoundPeats

SoundPeats Free2 classic Guía de instalación

SoundPeats

SoundPeats Air3 Manual de usuario

SoundPeats

SoundPeats Air4 Lite Guía de instalación

SoundPeats

SoundPeats Air3 pro Guía de instalación

SoundPeats

SoundPeats Truengine2 Manual de usuario

Manuales populares de Auriculares de otras marcas

Sony

Sony MDR-NC8 Manual de usuario

AUSounds

AUSounds AU-Stream Manual de usuario

ENERGY SISTEM

ENERGY SISTEM Style 7 Manual de usuario

Philips

Philips SHE3622 Manual de usuario

Insignia

Insignia NS-CAHBTSPORT Manual de usuario

Movie Vision

Movie Vision HP-400 Manual de usuario

MobiFren

MobiFren SM Pro Manual de usuario

Motorola solutions

Motorola solutions PMLN8120 Manual de usuario

Jaybird

Jaybird freedom Guía de instalación

Sony

Sony MDR-ED12LP Manual de usuario

HiFuture

HiFuture Tidy Buds Pro Manual de usuario

Creative

Creative CB2530 Manual de usuario

Renkforce

Renkforce RF FTVK-100 Manual de usuario

Philips

Philips SHQ3000 Manual de usuario

Sennheiser

Sennheiser 500371 Manual de usuario

Califone

Califone 2924AV Manual de usuario

Philips

Philips EARGEAR HE205 Series Manual de usuario

Technics

Technics EAH-AZ80 Manual de usuario