Sony TV & Home A/V Manual de instrucciones
© 2010 Sony Electronics Inc. All rights reserved.
This is a general recommendation based on the information you provided. You can customize
the connections to suit your individual preferences and viewing habits.
Some hookup recommendations have two cable options listed in the cable section. You will only
need the cables listed under the cable option you choose. You can also use a combination of
cables rather than one type throughout.
This hookup guide uses generic
names for connection jacks and input
labels. The table on the right lists
some of the label variations you may
find on your equipment.
If you don’t have a cable box or satellite receiver (AKA set-top box), skip the steps for the set-
top box. Connect the coaxial cable from the wall into the RF in connection on the next device. If
you’re not connecting a broadcast signal source, disregard the steps involving the set-top box
and begin with the steps for the equipment you are connecting.
This guide provides basic instructions for operating your equipment. The steps can vary by
brand and model. Refer to the manual supplied with your equipment for details specific to your
model. Sony product manuals and documentation can found on the Sony eSupport web site. If
you have questions about a non-Sony device, please contact the manufacturer for information.
You can now surf the web with Sony Internet TV products. If you need help connecting to your
wired or wireless network, check out our Network Connection tutorial.
RF IN, RF OUT
UHF/VHF, CABLE, LINE, TV
LINE IN, LINE OUT
VIDEO
AUDIO IN, AUDIO
OUT
FIXED, VARIABLE
MONITOR
TO TV, VIDEO IN, VIDEO OUT
1
© 2010 Sony Electronics Inc. All rights reserved.
2
© 2010 Sony Electronics Inc. All rights reserved.
We recommend this hookup to view cable or satellite service, VHS and DVD movies on your
TV. This connection should be used if your TV, set-top box, and VCR/DVD combo unit have
component (Y/Pb/Pr) video connectors. This connection is most commonly used for high-
definition programming.
(2) Component (Y/Pb/Pr) video cables
(2) Composite audio cables
(2) Composite A/V cables
1. Connect the coaxial cable from the wall to the RF IN jack on the set-top box.
Note: If your satellite service does not include local channels, you may want to connect an
antenna to the TV IN jack on your satellite receiver. Refer to the operating instructions for specific
information on switching between satellite and local broadcasts.
2. Connect a component video cable and a composite audio cable to:
a. COMPONENT LINE OUT and AUDIO OUT jacks on the set-top box
b. COMPONENT VIDEO IN and AUDIO IN jacks on the TV
Note: Be sure to match the colors of the cable connectors with the colors of the jacks.
3. Connect a component video cable and a composite audio cable to:
a. COMPONENT LINE OUT and AUDIO OUT jacks on the VCR/DVD
combo unit
b. COMPONENT VIDEO IN and AUDIO IN jacks on the TV
4. Connect a composite A/V cable to:
a. LINE OUT jacks on the set-top box
b. LINE IN jacks on the VCR/DVD combo unit
3
© 2010 Sony Electronics Inc. All rights reserved.
5. Connect a composite A/V cable to:
a. LINE OUT jacks on the VCR/DVD combo unit
b. VIDEO input jacks on the TV
1. Turn on the TV.
2. Turn on the set-top box.
3. Tune the TV to the component (Y/Pb/Pr) video input to which the set-top box is
connected, for example, VIDEO 5.
If there is picture and sound on the TV, you have connected the component video and
corresponding audio cable between the TV and the set-top box correctly.
4. Turn on the VCR/DVD combo unit.
5. Select the line input on the VCR/DVD combo unit to which the set-top box is connected,
for example, LINE 1 (L1) or LINE 2 (L2).
6. Tune the TV to the composite video input to which the VCR/DVD is connected, for
example, VIDEO 1.
If you have picture and sound on the TV, you have connected the A/V cables correctly.
7. Tune the TV to the component video input to which the VCR/DVD unit is connected, for
example VIDEO 4.
8. Insert a DVD movie into the VCR/DVD combo unit.
9. Press the PLAY button on the VCR/DVD combo unit remote control.
If you have picture and sound on the TV, you have connected the component video and
corresponding audio cable between the TV and the VCR/DVD combo unit correctly.
Note: It may be necessary to set the source on the VCR/DVD combo unit to DVD. Your remote
control should have a button to switch between the sources. Refer to the operating instructions
supplied with the VCR/DVD combo unit for more information.
Watch satellite or cable TV
1. Turn on the TV.
2. Turn on the set-top box.
3. Tune the TV to the component (Y/Pb/Pr) video input to which the set-top box is
connected, for example, VIDEO 5.
4. Tune the set-top box to the desired channel.
Watch a DVD
1. Turn on the TV.
2. Turn on the VCR/DVD combo unit.
3. Tune the TV to the component video input to which the VCR/DVD unit is connected, for
example VIDEO 4.
4. Insert a DVD into the VCR/DVD combo unit.
5. Press the PLAY button on the VCR/DVD combo unit remote control.
Note: It may be necessary to set the source on the VCR/DVD combo unit to DVD. Your
remote control should have a button to switch between the sources. Refer to the operating
instructions supplied with the VCR/DVD combo unit for more information.
4
© 2010 Sony Electronics Inc. All rights reserved.
Watch a VHS tape
1. Turn on the TV.
2. Turn on the VCR/DVD combo unit.
3. Tune the TV to the video input to which the VCR/DVD is connected with the A/V cable,
for example, VIDEO 1.
4. Insert a VHS tape into the VCR/DVD combo unit.
5. Press the PLAY button on the VCR/DVD combo unit remote control.
Note: It may be necessary to set the source on the VCR/DVD combo unit to VCR. Your
remote control should have a button to switch between the sources. Refer to the operating
instructions supplied with the VCR/DVD combo unit for more information.
Record from the set-top box
1. Turn on the TV.
2. Turn on the VCR/DVD combo.
3. Turn on the cable box/satellite receiver.
4. Select the video input on the TV in which the VCR/DVD combo is connected with the
A/V cable.
5. Select the line input on the VCR/DVD combo unit to which the set-top box is connected,
for example, LINE 1 (L1) or LINE 2 (L2).
6. Tune the set-top box to the channel you want to record.
7. Insert a recordable VHS tape into the VCR/DVD combo.
8. Press the Record button on the VCR/DVD combo unit remote control.
Note: It may be necessary to set the source on the VCR/DVD combo unit to VCR. Your
remote control should have a button to switch between the sources. Refer to the operating
instructions supplied with the VCR/DVD combo unit for more information.
5
© 2010 Sony Electronics Inc. All rights reserved.
Dub
To make a copy.
HDMI Repeater
A device, such as an A/V receiver, that receives an audio/video signal from one HDMI device and passes it
through to another connected HDMI device.
High Definition (HD)
Video signal up to six times the picture and detail resolution of conventional standard definition. As of January
2007 1080p is the highest line resolution available for HD content.
Interlaced scanning
Half a frame of video is drawn on the screen at one time using the odd scan lines, then the second half of the
frame is drawn on the screen using the even scan lines. Because this process happens so quickly the human
eye sees a full image.
Line In/Out
Transfers an audio and/or video signal in or out of one unit for connection into another. (Example Line 1)
Monitor Out
An output jack usually found on an A/V receiver that passes video information from a connected video device
to a television.
Progressive scanning
An entire frame of video is drawn on the screen at one time line by line. This results in crisper images and up
to twice as many frames per second of video compared to interlaced scanning
Set-top Box
Cable box or satellite receiver.
Standard Definition (SD)
Conventional TV broadcasting with the standard 480 active scanning lines and interlaced scanning (480i).
Stereo Audio
Right and left (2) channel audio.
Tuner
An electronic circuit or device used to select signals at a specific radio frequency for amplification and
conversion to video and sound.
Video Input/Output
Transfers an audio and/or video signal in or out of one unit for connection into another. (Example Video 5)
6
Otros manuales para TV & Home A/V
13
Tabla de contenidos
Otros manuales de TELEVISOR de Sony
Sony
Sony KV-HF21M50 Manual de usuario
Sony
Sony BRAVIA KD-65X8577G Manual de usuario
Sony
Sony Trinitron KV-9PT20 Manual de usuario
Sony
Sony Bravia KD-43X8 K Series Manual de usuario
Sony
Sony BRAVIA KD-65X9500H Manual de usuario
Sony
Sony KDL-V26XBR1 Operating Instructions... Manual de usuario
Sony
Sony Trinitron KV-13M40 Manual de usuario
Sony
Sony KV-SW34M61 Manual de usuario
Sony
Sony Trinitron KV-14MB40 Manual de usuario
Sony
Sony KV-32XBR400 Manual de usuario
Sony
Sony TRINITRON KV-DX29K9H Manual de usuario
Sony
Sony BRAVIA KLV-32W672F Manual de usuario
Sony
Sony TRINITRON KV-PF14Q40 Manual de usuario
Sony
Sony NSX-24GT1 (PDF) Manual de usuario
Sony
Sony Bravia FW-50BZ35J Manual de usuario
Sony
Sony BRAVIA XR-48A90K Manual de usuario
Sony
Sony FD Trinitron KV-28FX65 B Manual de usuario
Sony
Sony TRINITRON KV-J51PF2S Manual de usuario
Sony
Sony TRINITRON KV-PF21M70 Manual de usuario
Sony
Sony BRAVIA KDL-32W700C Guía del usuario
Manuales populares de TELEVISOR de otras marcas
Philips
Philips Colour Television Manual de usuario
Toshiba
Toshiba 27A10 Manual de usuario
Philips
Philips 42PF9630A/37 Manual de usuario
Hitachi
Hitachi 32FX48B Manual de usuario
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario
Changhong Electric
Changhong Electric uhd55b6000is Manual de usuario
