Sony SDX-700V Series Manual de usuario
AIT Drive
2-108-088-11(1)
2004 Sony Corporation
AIT-3 TAPE DRIVE
SDX-700V Series
User’s Guide
2
This document contains proprietary
information which is protected by
copyright.
All rights reserved. No part of this
document may be photocopied,
reproduced or translated to another
language without prior written consent
of Sony.
The information contained in this
document is subject to change without
notice.
SONY MAKES NO WARRANTY
OF ANY KIND WITH REGARD TO
THIS DOCUMENT.
Sony shall not be liable for errors
contained herein, indirect, special,
incidental or consequential damages in
connection with the furnishing,
performance or use of this document.
Your AIT TAPE DRIVE is assigned a
Model No. ATDNA3 for regulatory
compliance certifications.
The number is indicated on the model
number label on your drive along with
the rated voltoge and current.
VORSICHT
Diese Ausrüstung erfüllt die
Europäischen EMC-Bestimmungen für
die Verwendung in folgender /
folgenden Umgebung(en):
•Wohngegenden
• Gewerbegebiete
•Leichtindustriegebiete
(Diese Ausrüstung erfüllt die
Bestimmungen der Norm EN55022,
Klasse B.)
3
IMPORTANT SAFEGUARDS
For your protection, please read these
safety instructions completely before
operating the appliance, and keep this
manual for future reference.
Carefully observe all warnings,
precautions and instructions on the
appliance, or the one described in the
operating instructions and adhere to
them.
USE
Power Sources –This unit should be
operated only from the type of power
source indicated on the marking label.
If you are not sure of the type of
electrical power, consult your dealer or
local power company.
For the unit with a three-wire
grounding type ac plug:
If you are unable to insert the plug into
the outlet, contact your electrician to
have a suitable plug installed. Do not
defeat the safety purpose of the
grounding plug.
AC Power cord: (for AC mains
operating unit only)
The AC power cord should have
appropriate safety approvals or
marking for the country in which the
equipment will be used. Consult your
dealer or local power company.
Cleaning –Unplug the unit from the
wall outlet before cleaning or
polishing it. Do not use liquid
cleaners or aerosol cleaners.
Use a cloth lightly dampened with
water for cleaning the exterior of the
unit.
Object and Liquid Entry –Never
push objects of any kind into the unit
through openings as they may touch
dangerous voltage points or short out
parts that could result in a fire or
electric shock. Never spill liquid of
any kind on the unit.
4
INSTALLATION
Water and Moisture –Do not use
power-line operated units near water -
for example, near a bathtub,
washbowl, kitchen sink, or laundry
tub, in a wet basement, or near a
swimming pool, etc.
Power-Cord Protection –Route the
power cord so that it is not likely to be
walked on or pinched by items placed
upon or against them, paying
particular attention to the plugs,
receptacles, and the point where the
cord exits from the appliance.
Accessories –Do not place the unit on
an unstable cart, stand, tripod, bracket,
or table. The unit may fall, causing
serious injury to a child or an adult,
and serious damage to the unit. Use
only a cart stand tripod, bracket, or
table recommended by the
manufacturer.
Ventilation –The slots and openings
in the cabinet are provided for
necessary ventilation. To ensure
reliable operation of the unit, and to
protect it from overheating, these slots
and openings must never be blocked or
covered.
•Never cover the slots and openings
with a cloth or other materials.
•Never block the slots and openings
by placing the unit on a bed, sofa,
rug or other similar surface.
•Never place the unit in a confined
space, such as a bookcase, or built-
in cabinet, unless proper ventilation
is provided.
SERVICE
Damage Requiring Service –Unplug
the unit from the wall outlet and refer
servicing to qualified service
personnel under the following
conditions:
•When the power cord or plug is
damaged or frayed.
•If liquid has been spilled or objects
have fallen into the unit.
•If the unit has been exposed to rain
or water.
•If the unit has been subject to
excessive shock by being dropped,
or the cabinet has been damaged.
•If the unit does not operate normally
when following the operating
instructions. Adjust only those
controls that are specified in the
operating instructions. Improper
adjustment of other controls may
result in damage and will often
require extensive work by a
qualified technician to restore the
unit to normal operation.
•When the unit exhibits a distinct
change in performance - this
indicates a need for service.
Servicing –Do not attempt to service
the unit yourself as opening or
removing covers may expose you to
dangerous voltage or other hazards.
Refer to all servicing to qualified
service personnel.
5
Table of Contents
Overview ..................................................................................................................6
Introduction ..............................................................................................................7
About AIT Drives ............................................................................................7
Precautions .......................................................................................................8
Installation ..............................................................................................................10
SCSI Connection/Setting the SCSI ID ...........................................................10
Option Switches (DIP Switch) .......................................................................11
Mounting Holes..............................................................................................14
Reconfiguring from 5.25" Model to 3.5" Model............................................15
Orientation......................................................................................................16
Attaching and Removing the Dust Cover...............................................................17
Attaching the Dust Cover............................................................................... 17
Removing the Dust Cover .............................................................................. 19
Operation ................................................................................................................20
Location of 3 LEDs ........................................................................................ 20
Drive Operation..............................................................................................21
Emergency Tape Removal Procedure ............................................................ 23
WORM Function .................................................................................................... 25
Interface Implementation........................................................................................27
Supported SCSI Messages .............................................................................27
Supported SCSI Commands........................................................................... 27
Specifications .........................................................................................................28
Product Specifications....................................................................................28
Sony Contacts ......................................................................................................... 30
6
Overview
The Sony SDX-700V series drives are high capacity data storage devices
using Advanced Intelligent tape (AIT) technology. The SDX-700V series
drives achieve high data reliability through Read-After-Write, an additional
level of Error Correction Code, and other features.
The Sony SDX-700V series drives store data on tape using standard
formats called AIT (Advanced Intelligent Tape) and ALDC.
7
Introduction
About AIT Drives
SDX-700V series drives are internal AIT drive units that use data cartridges
conforming to the AIT-3 format. SDX-700V series drives support AIT-1,
AIT-2, and AIT-3 formats.
Features
The SDX-700V series drives have the following features:
• Support reading and writing to data cartridges conforming to the AIT-1,
AIT-2, and AIT-3 formats.
•The Read After Write Function and third-level error correction code
guarantee high data reliability.
•Data compression provides 260 gigabytes of storage on 230 m tape-
length cartridge.*1
The native capacity is 100 gigabytes of storage on 230 m tape-length
cartridge.
•Stored data is automatically checked for compression.
• Ultra 160 Wide SCSI LVD/SE interface is fully supported for host
computer access.
*1 This is assuming 2.6 : 1 compression ratio.
The degree of data compression attained while recording data varies according to
system environment and data type.
8
Precautions
Installation
Avoid placing the drives in locations subject to:
–high humidity
–high temperature
– mechanical shock and vibration
–direct sunlight
*For details, see “Specifications” on page 28.
Operation
• Do not move the drives while they are operating. It may cause
malfunctions.
•Avoid exposing the drives to sudden changes from a low to high
temperatures. This may cause water condensation to collect inside the
drives. If the ambient temperature should suddenly rise while the drives
are turned on, wait at least one hour before turning on the drives. If you
attempt to operate the drives immediately after a sudden increase in
temperature, malfunctions may occur.
•Turning off the power to the drives while they are writing to tape may
cause the tape to become unreadable. All previously negotiated
parameters will be lost, whenever power to the drives is cycled.
Transportation
•Keep the original packing materials to facilitate safe transportation of the
drives.
•Always remove the tape/media cartridge before moving the drives. After
removing the drives from the computer, repack them into their original
packing.
9
Useable Cartridges
SDX-700V series can be used with data cartridges marked with the AIT-1,
AIT-2 or AIT-3 logo.
Note
Be sure to use only data cartridges designed specifically for AIT (do not use 8 mm video
cartridges) as this may damage the drives.
SCSI Termination
The SDX-700V series drives conform to the Microsoft PC97 standard,
which requires the internal (naked) drive to be terminated with an external
terminator.
Microsoft PC97 SCSI requirements
SCSI peripherals must not terminate the bus. Both internal and external cable ends are
instead terminated by plug-in connectors.
Example of SCSI setup
SDX-700 series drive
68-pin cable
Host Computer Wide SCSI
Terminator
10
Installation
SCSI Connection/Setting the SCSI ID
SCSI 68pin Connector
5 V
Power Connector
1234
GND GND 12 V
Disable
Enable
Parity
Note :
=
=
= CLOSED/Jumper
Don’t care
OPEN/Jumper not
installed
Parity Disable
No Connection
SCSI ID 3
SCSI ID 2
SCSI ID 1
SCSI ID 0
Jumpers
SCSI ID
SCSI ID
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
1
0
P.D.
N.C.
3
Parity Disable Jumper
Parity check function can be disabled by Jumper. Parity check is disabled
while left end jumper is installed. Parity generate function is always
enabled.
Tabla de contenidos
Otros manuales de Almacenamiento de Sony
Sony
Sony MicroVault USM8GL Manual de usuario
Sony
Sony VGC-RB10M - Vaio Desktop Computer Manual de usuario
Sony
Sony SRMASTER SRPC-5 Manual de usuario
Sony
Sony MO DISK DRIVE SMO-F551 Guía de inicio rápido
Sony
Sony MicroVault USM64GQX Manual de usuario
Sony
Sony MicroVault USM4GN Manual de usuario
Sony
Sony HD-E Series Manual de usuario
Sony
Sony SDX-420C Manual de usuario
Sony
Sony SDX-500V Manual de usuario
Sony
Sony IJ1001M Manual de usuario
Sony
Sony MicroVault USM1GH Manual de usuario
Sony
Sony USM512H Manual de usuario
Sony
Sony AITe90-UL Manual de usuario
Sony
Sony SDX-500 Series Manual de usuario
Sony
Sony USM32D Manual de usuario
Sony
Sony MSX-256 Manual de usuario
Sony
Sony BKMA-U70 Manual de usuario
Sony
Sony MSAC-US20 Manual de usuario
Sony
Sony PDW-1 Manual de usuario
Sony
Sony PWSK-4501 Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario