Sony MHC-RX70 Manual de usuario
3-859-543-11(1)
f
Mini Hi-Fi
Component
System
Operating Instructions
©1996 by Sony Corporation
MHC-RX70
MHC-RX80
2
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
This caution label is located inside the unit.
This appliance is classified
as a CLASS 1 LASER
product. The CLASS 1
LASER PRODUCT
MARKING is located on
the rear exterior.
This stereo sytem is equipped with the Dolby* B-
type noise reduction system.
* Dolby noise reduction manufactured under licence
from Dolby Laborotories Licencing Corporation.
“DOLBY” and the double-D symbol aare
trademarks of the Dolby Laborotories Licencing
Corporation.
GB
3
TableofContents
Getting Started
Step 1: Hooking up the system ............ 4
Step 2: Setting the time ......................... 6
Step 3: Presetting radio stations .......... 6
Connecting optional AV components . 7
Basic Operations
Playing a CD ......................................... 10
Recording a CD .................................... 12
Listening to the radio ........................... 13
Recording from the radio .................... 15
Playing a tape ........................................ 16
Recording from a tape ......................... 17
The CD Player
Using the CD display........................... 19
Playing the CD tracks repeatedly ...... 19
Playing the CD tracks in random
order ................................................ 20
Programming the CD tracks ............... 21
Playing CDs without interruption ..... 22
The Tape Deck
Recording on a tape manually ........... 23
Recording a CD by specifying track
order ................................................ 24
DJ Effects
Looping part of a CD ........................... 26
Flashing part of a CD ........................... 26
Waving the equalizer ........................... 27
Sound Adjustment
Adjusting the sound ............................ 28
Selecting the audio emphasis ............. 29
Adjusting the audio emphasis ............ 30
Making a personal audio emphasis
file .................................................... 32
Other Features
Singing along: Karaoke ...................... 33
Falling asleep to music ........................ 34
Waking up to music ............................. 35
Timer-recording radio programs ....... 36
Additional Information
Precautions ............................................ 38
Troubleshooting ................................... 39
Specifications ........................................ 42
Index........................................ Back cover
4
Connect the surround speakers.
(For MHC-RX80 only)
Connect the speaker cords to the
SPEAKER jacks of the same colour.
* The colour of your speaker cords might be
different. See the speakers’ manual for details if
supplied.
5
1
3
2
14
1
Step 1: Hooking up the system
Connect the front speakers.
Connect the speaker cords to the
SPEAKER jacks of the same colour.
Keep the speaker cords away from the
aerials to prevent noise.
* The colour of your speaker cords might be
different. See the speakers’ manual for details if
supplied.
1
Getting Started
2
Do the following procedure 1to 5to hook up your system using the supplied cords and
accessories.
AM loop aerial
FM lead aerial
Left front speaker
Right front speaker
Right surround speaker Left surround speaker
R
+
L
+
–
Black* (’)Red* (‘)
Insert only the stripped portion.
R
+
L
+
–
Black* (’)Red* (‘)
Insert only the stripped portion.
5
3Connect the FM/AM aerials.
Set up the AM loop aerial, then
connect it.
4Connect the mains lead to a wall
outlet.
Demo mode appears in the display.
5Deactivate the demo mode by
pressing DISPLAY/DEMO when
the system power is turned off.
The demo mode is also deactivated
when you set the time.
Extend the FM lead
aerial horizontally.
FM75
AM
COAXIAL
AM loop aerial
(supplied)
Inserting two size AA (R6)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1Press FUNCTION repeatedly until “CD”
appears in the display.
2Hold down PLAY MODE and press
POWER to turn off the power.
}}
]
]
6
n
Step 2: Setting the
time
You must set the time before using the timer
functions.
1Press CLOCK TIMER SET.
The hour indication flashes.
2Turn the jog dial to set the hour.
The clock is on a 12-hour system.
3Press ENTER/NEXT.
The minute indication flashes.
4Turn the jog dial to set the minute.
5Press ENTER/NEXT.
The clock starts working.
Tips
• If you’ve made a mistake, start over from step 1.
• Setting the time deactivates the demo mode .
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
Note
When setting the time, set the equalizer display to
anything other than Spectrum analyzer pattern 3.
(See “To change the equalizer display” on page 30.)
·∏
§
π
0)
1 3,52,4
43,5 6 2 1
·∏
§
π
0)
POWER
Step 3: Presetting
radiostations
The 3 band model lets you preset up to 40
stations, 20 for FM, 10 for MW and 10 for LW.
The 4band model lets you preset up to 45
stations, 20 for FM, 10 for MW and 5 for
UKV.
1Press TUNER/BAND repeatedly
until the band you want appears in
the display.
the bands you can recieve vary
depending on the model you purchased.
Be sure to check which bands you can
recieve.
Every time you press this button, the
band changes as follows:
3 band models:
FM nMW nLW
4 band model:
FM nMW nLW nUKV*
* “STEREO PLUS” is displayed when you select
UKV.
2Press TUNING MODE repeatedly to
select “AUTO”.
n
7
3Turn the jog dial.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo programme) appear.
4Press TUNER MEMORY.
A preset number appears in the display.
5Turn the jog dial to select the preset
number you want.
6Press ENTER/NEXT.
The station is stored.
7Repeat steps 1 to 6 to store other
stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly to select
“MANUAL” in step 2, then turn the jog dial
to tune in the station.
To change the preset number
Start over from step 1.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
TUNED
STEREO
MHz
VOLUME
AUTO
Preset number
TUNED
STEREO
VOLUME
AUTO
Connectingoptional
AVcomponents
To enhance your system, you can connect
optional components. Refer to the
instructions of each component.
Connecting audio
components
Select one of the following two connections,
depending on the equipment to be connected
and method of connecting.
Connecting an MD deck for digital
recording
You can record from CD into the MD deck
digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck
continued
8
Connecting optional AV
components (continued)
Connecting an MD deck for analog
recording
Make sure to match the colour of the plugs
and the connectors. To listen to the sound of
the connected MD deck, press FUNCTION
repeatedly until “MD” appears.
Tip
If you connect a turntable with MM cartridge,
connect it to VIDEO/MD IN using the optional MM
cartridge equalizer EQ-2 and an audio connecting
cord. To listen to the sound, press FUNCTION
repeatedly until “VIDEO” appears.
Notes
• You need to connect both left and right surround
speakers. Otherwise, the sound will not be heard
(MHC-RX80 only).
• If you cannot select “MD” even when you have
pressed FUNCTION, press POWER while
pressing FUNCTION when the power is turned
off. “VIDEO” will be switched to “MD”. To return
to “VIDEO” do the same procedure.
To the audio input
of the MD deck
To the audio output
of the MD deck
Connecting a VCR
Make sure to match the color of the plugs and
the connectors. To listen to the sound of the
connected VCR, press FUNCTION repeatedly
until “VIDEO” appears.
Note
If the sound is distorted when selecting “VIDEO”,
switch to “MD” (see previous “Notes).
To the audio output of the VCR
9
Connecting outdoor
aerials
Connect the outdoor aerial to improve the
reception.
FM aerial
Connect the optional FM outdoor aerial. You
can also use the TV aerial instead.
AM aerial
Connect a 6- to 15- meter (20- to 50- feet)
insulated wire to the AM aerial terminal.
Leave the supplied AM loop aerial connected.
Important
If you connect an outdoor aerial, ground from
yterminal with the screw clamp. To prevent
a gas explosion, do not connect the ground
wire to a gas pipe.
y
FM75
AM
COAXIAL
Screw clamp
Ground wire (not supplied)
IEC standard socket
connector
(not supplied)
FM75
AM
COAXIAL
y
Screw clamp
Ground wire (not supplied)
Insulated wire
(not supplied)
4
Raccordez les enceintes.
Raccordez les cordons d’enceintes aux
prises SPEAKER de la même couleur.
Eloignez les cordons d’enceintes des
antennes pour éviter que les antennes ne
captent du bruit.
R
+
L
+
–
Raccordez les enceintes surround.
(MHC-RX80 seulement)
Raccordez les cordons d’enceinte
surround aux prises SPEAKER de même
couleur.
Insérez seulement la partie dénudée du
cordon.
5
1
3
2
14
1
12
Antenne cadre AM
Effectuez les opérations 1à 5pour relier les différents éléments de la chaîne avec les cordons
et les accessoires fournis.
Etape 1: Raccordement de la chaîne
Préparatifs
Insérez seulement la partie
dénudée du cordon.
Noir*(’)
Antenne FM
Enceinte surround droite Enceinte surround gauche
Enceinte avant droite Enceinte avant gauche
* La couleur de vos cordons d’enceintes peut être
différente. Reportez-vous au mode d’emploi des
enceintes pour les détails.
R
+
L
+
–
Insérez seulement la partie
dénudée du cordon.
Noir* (’)
* La couleur de vos cordons d’enceintes peut être
différente. Reportez-vous au mode d’emploi des
enceintes pour les détails.
Rouge* (‘)
Rouge* (‘)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema estéreo de Sony
Sony
Sony CMT-EH25 Manual de usuario
Sony
Sony LBT-G1 Manual de usuario
Sony
Sony SRS-X5 Manual de usuario
Sony
Sony CMT-HPR99XM Manual de usuario
Sony
Sony MHC-GS100 - Mini Stereo System Manual de usuario
Sony
Sony CMT-HX3R Manual de usuario
Sony
Sony CX-J3000 Manual de usuario
Sony
Sony MHC-WZ5 Manual de usuario
Sony
Sony game sync lbt-xg900av Manual de usuario
Sony
Sony ZS-XN30 - Cd Boombox Manual de usuario
Sony
Sony MHC-DX90 Manual de usuario
Sony
Sony MHC-LX10000 - High Power Mini Hi-fi System Manual de usuario
Sony
Sony HCD-CPX22 - Cd Deck Receiver Component Manual de usuario
Sony
Sony MHC-GT3D Manual de usuario
Sony
Sony MHC-GZR5D Manual de usuario
Sony
Sony MEX-BT3600 Manual de usuario
Sony
Sony CMT-M90DVD - Micro Hi Fi Component System Manual de usuario
Sony
Sony LBT-XGV80 Manual de usuario
Sony
Sony CPF-IX001 - Wireless PC-Linked Audio System Manual de usuario
Sony
Sony LBT-D670AV - Compact Hifi Stereo System Manual de usuario
