Sony LBT-XB3KR Manual de usuario
©1997 by Sony Corporation
Operating Instructions
3-859-895-21(1)
Compact Hi-Fi
Stereo System
LBT-XB3KR
2
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
The laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
This caution label is located inside the unit.
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
This stereo system is equipped with the Dolby* B-
type noise reduction system.
* Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol aare
trademarks of the Dolby Laboratories Licensing
Corporation.
This appliance is classified as
a CLASS 1 LASER product.
The CLASS 1 LASER
PRODUCT MARKING is
located on the rear exterior.
3
ES
F
P
Table of Contents
Getting Started
Step 1: Hooking up the system ............ 4
Step 2: Setting the time ......................... 6
Step 3: Presetting radio stations .......... 7
Connecting optional AV
components ...................................... 8
Basic Operations
Playing a CD ......................................... 10
Recording a CD .................................... 12
Listening to the radio........................... 13
Recording from the radio .................... 14
Playing a tape........................................ 15
Recording from a tape ......................... 17
The CD Player
Using the CD display........................... 18
Playing CD tracks repeatedly ............. 18
Playing CD tracks in random
order ................................................ 19
Programming CD tracks ..................... 20
Playing CDs without interruption ..... 21
The Tape Deck
Recording on a tape manually ........... 22
Recording CDs by specifying the track
order ................................................ 23
DJ Effects
Looping part of a CD ........................... 25
Flashing part of a CD........................... 25
Waving the equalizer........................... 26
Sound Adjustment
Adjusting the sound ............................ 27
Selecting the audio emphasis ............. 28
Adjusting the audio emphasis............ 29
Making a personal audio emphasis
file .................................................... 30
Other Features
Singing along: Karaoke ...................... 31
Falling asleep to music ........................ 33
Waking up to music ............................. 34
Timer-recording radio programs ....... 35
Additional Information
Precautions ............................................ 37
Troubleshooting ................................... 38
Specifications ........................................ 40
Index....................................................... 42
4
Step 1: Hooking up the system
Getting Started
Follow steps 1through 4to hook up your system using the supplied cords and accessories.
* Your speaker’s shape may be different from the illustration above.
1Connect the speakers.
1Connect the speaker cords to
SPEAKER jacks of the same color.
Keep the speaker cords away from the
antennas to prevent noise.
2Insert only the stripped portion of the
cord. Inserting the vinyl portion will
interfere with the speaker connection
and no sound will come from the
speaker.
2
3
1
11
4
Left speaker*Right speaker*
AM loop antenna
FM antenna
Silver (’)Copper (‘)
R
+
L
+
–
5
2Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
3Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
4Deactivate the demonstration mode
by pressing DISPLAY/DEMO while
the system is off.
Inserting two size AA (R6)
batteries into the remote
Tips
•With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
•When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY/DEMO while the system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1Press FUNCTION repeatedly until “CD”
appears in the display.
2Hold down PLAY MODE and press
POWER to turn off the system.
AM loop antenna
Extend the FM wire
antenna horizontally.
FM75
AM
6
Step 2: Setting the
time 5Press ENTER/NEXT.
The clock starts.
Tip
If you make a mistake, start over from step 1.
You must set the time before using the timer
functions.
1Press t/CLOCK SET.
The hour indication flashes.
2Press TUNING +/– to set the hour.
The clock uses the 12-hour system.
3Press ENTER/NEXT.
The minutes indication flashes.
4Press TUNING +/– to set the
minutes.
3,51 2,4
7
Step 3: Presetting
radio stations
You can preset up to 30 stations, 20 for FM
and 10 for AM.
1Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Each time you press this button, the
band changes as follows:
FM ˜AM
2Press TUNING MODE repeatedly
until “AUTO” appears in the
display.
3Press TUNING +/–.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
4Press TUNER MEMORY.
A preset number flashes in the display.
5Press TUNING +/– to select the
preset number you want.
6Press ENTER/NEXT.
The station is stored.
7Repeat steps 1 through 6 to store
other stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press
TUNING +/– to tune in the station.
To change the preset number
Start over from step 1.
To change the AM tuning interval
The AM tuning interval is factory-preset to 9 kHz
(10 kHz in some areas). To change the AM tuning
interval to 10 kHz (or 9 kHz), press TUNER/BAND
repeatedly until “AM” appears first, then turn off
the system. While holding down ENTER/NEXT,
turn the system back on. When you change the
interval, the AM preset stations will be erased. To
reset the interval, repeat the same procedure.
Note
The preset stations are canceled when you
disconnect the power cord or if a power failure
occurs for half a day.
3,5 1246
POWER
DOLBY NR
OFF TUNED
STEREOAUTO
ALL DISC S
DOLBY NR
OFF TUNED
STEREOAUTO
ALL DISC S
MHz
DOLBY NR
OFF TUNED
STEREOAUTO
ALL DISC S
8
Connecting optional
AV components
To enhance your system, you can connect
optional components. Refer to the
instructions included with each component
for details.
Connecting audio
components
Connecting a turntable
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected turntable, press FUNCTION
repeatedly until “PHONO” appears.
Note
Using the turntable at high volume may cause
distortion or howling. This is often caused by the
bass sound from the speakers. The bass sound may
be picked up by the needle of the turntable, and
produce the distortion or howling. To avoid this, do
the following:
1Keep some distance between the speakers and the
turntable.
2Stop using the surround effect.
3Install the speakers or the turntable on a firm and
stable surface.
4Press DBFB repeatedly until “DBFB ”
disappears from the display.
Connecting a VCR
Be sure to match the color of the plugs and
the connectors. To listen to the sound from
the connected VCR, press FUNCTION
repeatedly until “VIDEO” appears.
To the audio output of the turntable
To the audio output of the VCR
9
Connecting outdoor
antennas
Connect an outdoor antenna to improve the
reception.
FM antenna
Connect an optional FM outdoor antenna.
You can also use the TV antenna instead.
AM antenna
Connect a 6 to 15 meter (20 to 50 feet)
insulated wire to the AM antenna terminal.
Leave the supplied AM loop antenna
connected.
Important
If you connect an outdoor antenna, connect a
ground wire to the yterminal with the screw
clamp. To prevent a gas explosion, do not
connect the ground wire to a gas pipe.
75-ohm coaxial cable
(not supplied)
Screw clamp
Ground wire (not supplied)
AM
FM75
Insulated wire (not supplied)
Screw clamp
Ground wire (not supplied)
FM75
AM
10
Playing a CD
— Normal Play
Basic Operations
You can play up to five CDs in a row.
1Press 6OPEN and place a CD on
the disc tray.
If the disc is not placed properly it will
not be recognized.
2Press DISC SKIP to place up to four
more CDs on the tray.
The disc tray rotates so you can insert
other CDs.
3Close the front cover.
4Press one of the DIRECT PLAY
buttons.
Playback starts.
If you press ·(or CD (on the
remote), playback starts from the CD in
the playing position.
AMS =/+
p
0/)
DISC SKIP
VOLUME +/–
POWER
1
/
A
L
L
D
I
S
C
S
P
L
A
Y
M
O
D
E
R
E
P
E
R
T
E
D
I
T
A
M
S
1234
CD (
pP
)
0
1/ALL DISCS
·VOLUME
Jog dial
P
ª
ª
6
Pr
0)
6
ª
Pp
ª
ª
p
6
0)p
)
0
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.
Disc number in the playing position
Track number
Elapsed time
DOLBY NR
OFF
ALL DISC S
Tabla de contenidos
Otros manuales de Sistema estéreo de Sony
Sony
Sony SRS-X55 Guía del usuario
Sony
Sony GTK-X1BT Manual de usuario
Sony
Sony CPF-IX001 - Wireless PC-Linked Audio System Manual de uso y cuidado
Sony
Sony MHC-EC619iP Manual de usuario
Sony
Sony LBT-G3000 Manual de usuario
Sony
Sony MHC-C33 Manual de usuario
Sony
Sony LBT-G1300 - Compact Hifi Stereo System Manual de usuario
Sony
Sony HCD-GRX5 Manual de usuario
Sony
Sony MDS-JA555ES - Md Player Manual de usuario
Sony
Sony SRS-ZR7 Manual de usuario
Sony
Sony SRS-X3 Manual de usuario
Sony
Sony CMT-X7CD Manual de usuario
Sony
Sony ST-RDB940 Manual de usuario
Sony
Sony MHC-GX555 - Mini Hi Fi Component System Manual de usuario
Sony
Sony HCD-VX90AV Manual de usuario
Sony
Sony CMT-EH10 Manual de usuario
Sony
Sony MHC-VX55 Manual de usuario
Sony
Sony CMT-V75BTIP Manual de usuario
Sony
Sony PMC-D407L Manual de usuario
Sony
Sony DAV-FC8 - Dvd Dream System Manual de usuario
