Sony LSPX-P1 Manual de usuario
Portable Ultra Short Throw Projector
LSPX-P1
Before first use
Checking the package contents [1]
Location of controls
Location of controls (Portable Ultra Short Throw Projector) [2]
Location of controls (Wireless unit) [3]
About the indicators [4]
The home screen of the special application [5]
Preparing
Projector install location [6]
Preparing the power
Charging the projector [7]
Battery duration of the projector [8]
Connect the Wireless unit to a wall outlet [9]
Turning the power on/off
Turning the projector on/off [10]
Placing the projector in standby status [11]
Installing the special application and performing the initial settings [12]
Connecting another device to the Wireless unit
Connecting an HDMI device or TV [13]
Connecting the IR Blaster [14]
How to use the special application
The home screen of the special application [15]
Updating the software [16]
Projecting the poster
Projecting the clock [17]
Projecting weather information [18]
Projecting a slideshow [19]
Setting the photo change interval [20]
Projecting a smartphone’s photo/movie
Projecting a smartphone’s photo/movie [21]
Using the mirroring function to project the smartphone’s screen
Using the mirroring function to project the smartphone’s screen [22]
Projecting photos/movies from a device on the home network
Projecting photos/movies from a device on the home network [23]
Projecting images from the HDMI device connected to the Wireless
unit
Projecting images from the HDMI device connected to the Wireless unit [24]
Settings
Adjusting the volume/picture
Adjusting the volume [25]
Adjusting the brightness [26]
Adjusting the focus [27]
Keystone correction [28]
Rotating the projected image [29]
Setting auto on/standby [30]
Adjusting the picture settings [31]
Adjusting the sound quality (xLOUD) [32]
Configuring the network settings
Changing the device name of the projector [33]
Connecting to an access point [34]
Connecting via Wi-Fi Direct [35]
Checking the signal strength [36]
Confirming registration when connecting a smartphone [37]
Managing smartphones to be connected [38]
Checking the Wi-Fi MAC address [39]
Setting the language for the projector [40]
Updating the software [41]
Resetting to the initial settings [42]
Deleting contents stored in the projector [43]
Checking the projector to be operated using the special application [44]
Pairing the projector and Wireless unit again [45]
Precautions/specifications
Precautions [46]
Cleaning [47]
Specifications [48]
Battery duration of the projector [49]
Trademarks [50]
About licenses [51]
Troubleshooting/frequently asked questions
Frequently asked questions
The color is not correct. [52]
The projected image is distorted. [53]
There are shadows on the projected image. [54]
The projected images flicker, or small point noises are displayed. [55]
The focus cannot be adjusted [56]
Images from the HDMI device are not projected, or the picture quality is poor. [57]
The projection screen dims automatically, or the projection screen turns off. [58]
Poor picture quality. [59]
Cannot operate with the special application. [60]
[1] Before first use
Checking the package contents
After opening the package, check that all items in the list are included in the package. If any item is
missing, contact your dealer.
Numbers in ( ) indicate the item quantities.
Portable Ultra Short Throw Projector (LSPX-P1) (1)
Wireless unit (LSPX-PT1) (1)
AC adaptor VGP-AC19V77 (19.5 V / for the projector) (1)
AC adaptor LSPX-AC5V2 (5 V / for Wireless unit) (1)
Power cord (2)
IR Blaster (1)
Startup Guide (1)
Reference Guide (1)
Warranty (1)
[2] Before first use
Location of controls
Location of controls (Portable Ultra Short Throw
Projector)
The location of controls of the projector is described below.
Ventilation holes (intake/exhaust)
1. Projection window
Projects images onto a wall, table or floor.
2.
Remote control receiver
Receives signals from the HDMI device’s remote control to transfer the signals to the HDMI
device connected to the Wireless unit, thus allowing you to operate the HDMI device. The
Wireless unit and the HDMI device should be connected via the IR Blaster (supplied).
3.
Speakers
4. Power indicator
Indicates the status of the power and battery of the projector.
5.
Power button
Press and hold to turn the projector on/off. Press lightly while the projector is turned on to switch
between standby/power-on.
6.
Illumination sensor
Measures the ambient illumination to adjust the projection screen brightness.
7.
DC IN 19.5V jack
Connect the AC adaptor VGP-AC19V77 (supplied).
8.
[3] Before first use
Location of controls
Location of controls (Wireless unit)
The location of controls of the Wireless unit is described below.
Distance sensor
Measures the distance between the projector and the projection surface.
9.
RESET button
Resets and restarts the projector.
10
.
Charge indicator
Turns on during charging.
11
.
Power jack for the stand (sold separately)
Supplies power to the floor stand (sold separately) when the projector is mounted on the stand.
12
.
HDMI IN connector
Connect an HDMI device with a commercially available HDMI cable. You can project images from
the connected device.
1.
HDMI OUT connector
Connect a TV with a commercially available HDMI cable. You can display images from the device
connected to the Wireless unit onto the TV screen.
2.
[4] Before first use
Location of controls
About the indicators
The meanings of the indicators of the projector and the Wireless unit are shown below:
Projector indicators
IR BLASTER connector
Connect the IR Blaster (supplied)
3.
DC IN 5V jack
Connect the AC adaptor LSPX-AC5V2 (supplied).
4.
PAIRING button
The projector and the Wireless unit have already been paired (connection setting) at the time of
purchase. When the pairing is removed, such as after maintenance, use this PAIRING button to
pair them again.
5.
Indicator
Indicates the status of the Wireless unit.
6.
Power indicator
Turned off: The power is off.
Turned on in white (dim): The projector is in standby status.
Turned on in white (bright): The power is on.
Flashing in red
Flashing every four seconds: The battery is low.
Flashing every two seconds: The temperature inside the projector is too high or too low.
1.
Wireless unit indicator
Turned on in white: Connected with the projector.
It lights in white when connected to the wall outlet while the Wireless unit is turned off. The
indicator turns off when the Wireless unit is ready to use.
Flashing in white every second: Software update is in progress.
[5] Before first use
Location of controls
The home screen of the special application
The items displayed in the home screen of “Portable Ultra Short Throw Projector Application” are
described.
Leave the projector at room temperature for a while, then turn in on again.
Flashing three times every three seconds: The projector is malfunctioning. Consult your
dealer.
Charge indicator
Turned off: Recharging is complete.
Turned on: Charging.
2.
(Settings) button
Displays the setting menu.
1.
(standby/power-on) button
Switches between standby and power-on.
2.
Projector remaining battery life
3. Poster button
Places the projector in poster mode.
Tap this button to project a poster, to use the screen mirroring function to project the
smartphone’s screen, or to project photos or movies from a device on the home network.
The projector is automatically placed in poster mode just after it is turned on. Tap this to place it
in poster mode manually.
Tap the button under [Poster] to change the poster type.
4.
“HDMI” button
Places the projector in “HDMI” mode.
Tap this button to project images from the HDMI device connected to the Wireless unit.
5.
(control panel) button
Opens the control panel. You can change the screen brightness, volume, etc.
6.
Photo cast button
Tap this button to project a photo or movie stored in the smartphone using the special application.
7.
Otros manuales para LSPX-P1
5
Tabla de contenidos
Otros manuales de Proyector de Sony
Sony
Sony VPL-V800Q Manual de usuario
Sony
Sony VPL-CS5A Manual de usuario
Sony
Sony VPL-VW1100ES Manual de usuario
Sony
Sony VPL-FHZ66 Manual de servicio
Sony
Sony VPL-VW760 Manual de servicio
Sony
Sony VPL-HS51 - Cineza Home Theater Video... Manual de usuario
Sony
Sony SRX-T105 Manual de usuario
Sony
Sony KP-48V80 - 48" Color Rear Video Projector Manual de usuario
Sony
Sony VPL-FE40/FE40L Manual de usuario
Sony
Sony KPR-41EXR95 Manual de usuario
Sony
Sony VPL-SW636C Manual de servicio
Sony
Sony VPL-ES1 Manual de usuario
Sony
Sony VPH-D50Q Manual de usuario
Sony
Sony KP-41T25 - 41" Color Rear Video Projector Manual de usuario
Sony
Sony VPL-FHZ91L Manual de servicio
Sony
Sony KPR-41EXR95 Manual de usuario
Sony
Sony VPL-VW890ES Manual de servicio
Sony
Sony VPL VW50 - SXRD - Projector Manual de usuario
Sony
Sony HDMI VPL-EW7 Manual de servicio
Sony
Sony VPL-FH36 Manual de usuario
