Sony SBH80 Manual de usuario

User guide

Stereo Bluetooth® Headset

SBH80

Contents

Introduction..................................................................................3

Function overview..............................................................................3

Hardware overview............................................................................3

Basics............................................................................................5

Charging the battery..........................................................................5

Battery and power management.......................................................5

Turning the headset on and off..........................................................5

Adjusting the volume.........................................................................5

Resetting the headset........................................................................6

Wearing instruction............................................................................6

Getting started..............................................................................7

Preparing to use your headset with a Bluetooth® device.................7

Using your headset......................................................................8

Using your headset to handle phone calls.........................................8

Using your headset to listen to music...............................................8

Using your headset with two devices simultaneously.......................8

Troubleshooting.........................................................................10

I cannot answer a second call.........................................................10

Music from another device does not play in the headset................10

The headset turns off automatically.................................................10

No connection between headset and other device.........................10

Unexpected behaviour.....................................................................10

Legal information.......................................................................11

Declaration of Conformity ...............................................................12

This is an Internet version of this publication. © Print only for private use.

Introduction

Function overview

Your Stereo Bluetooth® Headset SBH80 is designed to make life more convenient

when you're on the go. You can use it together with an Android™ powered device

such as a phone or tablet, or with a Bluetooth® compatible device such as a non-

Android phone, a computer or a music player. When paired with a compatible device,

you can use your headset to control incoming and outgoing phone calls or to listen to

music.

Hardware overview

1NFC detection area Touch other devices to this area during NFC pairing.

2Micro USB port Insert the cable for charging the battery.

3Notification light Flashing red light: battery level is between 0% and 4%.

Yellow light: battery level is between 5% and 29%.

Green light: battery level is between 30% and 100%.

Flashing cyan-coloured light: headset is in pairing mode.

Flashing purple light: a call is coming in.

4Power key Press and hold down to turn the headset on or off.

When the headset is on, briefly press to show a

notification light indicating battery level.

5Next key Press to play the next track.

6Play /Pause key Press to play or pause the current track.

7Previous key Press to play the previous track.

This is an Internet version of this publication. © Print only for private use.

8Antenna

9Volume down key Press to turn down the volume.

10 Call key Press to answer incoming calls.

Press and hold down to reject incoming calls.

11 Volume up key Press to turn up the volume.

This is an Internet version of this publication. © Print only for private use.

Basics

Charging the battery

Before using the Stereo Bluetooth® Headset SBH80 for the first time, you need to

charge the headset for approximately 2.5 hours. Sony chargers are recommended.

To charge your headset

1Plug one end of the USB cable into the charger or into the USB port of a

computer.

2Plug the other end of the cable into the Micro USB port of your Stereo

Bluetooth® Headset SBH80 device.

Battery and power management

You can view an estimate of how much time is left before the battery of your headset

runs out and get notified when the battery reaches a critically low level. You can also

receive a reminder to charge your headset when you start charging a device that is

paired with your headset.

To view the estimated battery time

1From your Home screen, tap .

2Find and tap Settings > Power management > Accessory.

To enable the critical battery level notification

1From your Home screen, tap .

2Find and tap Settings > Power management > Accessory.

3Mark the Critical battery level notification checkbox.

To enable the charging reminder notification

1From your Home screen, tap .

2Find and tap Settings > Power management > Accessory.

3Mark the Charger reminder checkbox.

Turning the headset on and off

To turn on the headset

•Press and hold down until the headset vibrates and the notification light

turns green.

To turn off the headset

•Press and hold down until the headset vibrates.

Adjusting the volume

To change the call or music volume

•During a call, or when listening to music, press or .

This is an Internet version of this publication. © Print only for private use.

Resetting the headset

Reset the headset if it behaves unexpectedly. Resetting the headset removes all

information about paired devices.

To reset the headset

1Turn off the headset, then connect the charger so that the headset starts to

charge.

2Press and hold down until the headset vibrates briefly.

Wearing instruction

To get the best performance from your headset when using it outdoors, it is

recommended that you carry the device that you have paired with the headset on the

same side of your body as the antenna of the headset unit.

This is an Internet version of this publication. © Print only for private use.

Getting started

Preparing to use your headset with a Bluetooth® device

Before you can start using your headset with a Bluetooth® device, you need to pair

the headset with the Bluetooth® device manually using Bluetooth® or automatically

using NFC.

To manually pair your headset with a Bluetooth® device

1Bluetooth® device: Make sure the Bluetooth® function is turned on.

2Turn off your headset.

3Headset: Press and hold down until the headset vibrates and a cyan-

coloured notification light flashes continuously.

4Bluetooth® device: Scan for Bluetooth® devices, then select Stereo

Bluetooth® Headset SBH80 in the list of available devices.

5Bluetooth® device: Follow the pairing instructions that appear on the screen.

To automatically pair your headset with a Bluetooth® device

1Bluetooth® device: Make sure that the NFC function is turned on and that the

screen is active and unlocked.

2Headset: Press and hold down until the headset vibrates and a cyan-

coloured notification light flashes continuously.

3Place the Bluetooth® device over your headset so that the NFC detection area

of each device touches the other.

4Bluetooth® device: Follow the pairing instructions that appear.

The device used in this illustration is for illustration purposes only and may not accurately

depict the actual device used.

This is an Internet version of this publication. © Print only for private use.

Using your headset

Using your headset to handle phone calls

Use the headset to handle incoming calls, for example, to answer or reject a call.

To answer a call with the headset

•When you hear an incoming call signal, press .

To end a call

•During an ongoing call, press .

To reject a call

•When you hear an incoming call signal, press and hold down .

To answer a second call

•When you hear an incoming call signal during an ongoing call, press . The

ongoing call is put on hold.

You can also press or to switch to another call and put the current call on hold.

To reject a second call

•When you hear an incoming call signal during an ongoing call, press and hold

down .

To mute and unmute the microphone during a call

•Press and hold down to mute the microphone. To unmute the microphone,

press and hold down again.

Using your headset to listen to music

You can listen to music from your phone or another Bluetooth® compatible device

using your headset.

To listen to music

1Open the music player application in your device and select a track that you

want to listen to.

2Press to play the track. To pause the track, press again.

To move between tracks

•Press or .

To fast forward or rewind a music track

•Press and hold down or to fast forward or rewind until you reach the

desired position.

Using your headset with two devices simultaneously

Your headset has two different connection modes: Multipoint mode and Singlepoint

mode. Multipoint mode helps you manage two connections at the same time. For

example, if you connect your headset with two phones, you can receive calls from

both phones without having to disconnect and reconnect. Multipoint mode is enabled

by default. If you stop using one of two connected devices, you should switch to

Singlepoint mode manually.

This is an Internet version of this publication. © Print only for private use.

In Multipoint mode, the headset remembers both paired devices. You can reconnect

previously paired devices easily by manually switching back to Multipoint mode from

Singlepoint mode. A previously paired device can then be detected automatically.

You can only connect to a maximum of two devices in Multipoint mode. If you pair the headset

with a third device, the first paired device gets disconnected.

To manually pair your headset with a second device

•After manually pairing the first device with your headset, repeat the same

instruction steps that describe how to manually pair your headset with another

device.

To automatically pair your headset with a second device

•After pairing the first device with your headset automatically, repeat the same

instruction steps that describe how to automatically pair your headset with

another device.

To switch between Multipoint mode and Singlepoint mode

1Make sure that the headset is turned off.

2Put the headphones in your ears.

3To enter Multipoint mode, press and hold down the volume up key while

turning on the headset. After Multipoint mode is activated, you will hear two

beeps.

4To enter Singlepoint mode, press and hold down the volume down key while

turning on the headset. After Singlepoint mode is activated, you will hear one

beep.

In order to connect to both paired devices in Multipoint mode, you need to restart the

headset.

This is an Internet version of this publication. © Print only for private use.

Troubleshooting

I cannot answer a second call

•Make sure that your calling device supports the Bluetooth® headset profile.

•Make sure that the correct calling device is selected.

Music from another device does not play in the headset

•Make sure that the music-playing device is paired with the headset.

•Restart the music player application on the music-playing device.

•Make sure that the correct music source is selected.

The headset turns off automatically

•If the headset beeps several times shortly before turning off, the battery level is low.

Charge the battery.

No connection between headset and other device

•Make sure that the headset is charged and within range of the device that you want

to connect to. A maximum distance of 10 metres (33 feet), with no solid objects in

between, is recommended.

•Disable the Bluetooth® function in the other device so that all connections are

closed, then re-enable the Bluetooth® function and pair the headset with the device

again.

Unexpected behaviour

•Reset the headset.

This is an Internet version of this publication. © Print only for private use.

Tabla de contenidos

Otros manuales de Auriculares de Sony

Sony

Sony PlayStation PULSE 3D Manual de usuario

Sony

Sony DR-BT10CX Manual de usuario

Sony

Sony WH-XB910N Guía de referencia

Sony

Sony SBH82D Manual de usuario

Sony

Sony MDR-XB950BT Manual de usuario

Sony

Sony BKNW-116 Manual de usuario

Sony

Sony DRBT160AS - Bluetooth Stereo Headset Manual de usuario

Sony

Sony DR BT101 Manual de usuario

Sony

Sony DRBT160AS - Bluetooth Stereo Headset Manual de usuario

Sony

Sony DR-BT10CX Manual de usuario

Sony

Sony INZONE H5 Guía de referencia

Sony

Sony MDR-1ABT Manual de usuario

Sony

Sony XBA-1VP Manual de usuario

Sony

Sony PlayStation CECHYA-0086 Manual de usuario

Sony

Sony DR-EX300iP Manual de usuario

Sony

Sony CECHYA-0080 Manual de usuario

Sony

Sony DR-EX300iP Manual de usuario

Sony

Sony CECHYA-0083 Manual de instalación y funcionamiento

Sony

Sony MDR-ZX770BN Manual de usuario

Sony

Sony SBH90C Manual de usuario

Sony

Sony WH-1000XM2 Manual de usuario

Sony

Sony MBH22 Manual de usuario

Sony

Sony PlayStation CECHYA-0086 Manual de usuario

Sony

Sony DR-BT160iK - Wireless Stereo Headset Manual de usuario

Manuales populares de Auriculares de otras marcas

Sena

Sena SMH10 Manual de usuario

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manual de usuario

Sennheiser

Sennheiser EPOS ADAPT 230 Manual de usuario

Doro

Doro Flexus HS2005 Manual de usuario

GE 98971 Manual de usuario

Hama

Hama 00184070 Manual de usuario

Plantronics

Plantronics Blackwire 3200 Series Manual de usuario

Blue Tiger

Blue Tiger Advantage PLUS Manual de usuario

Jawbone

Jawbone Icon Manual de usuario

Jabra

Jabra FR 20 Manual de usuario

Roxcore

Roxcore Flow A+ Manual de usuario

Turtle Beach

Turtle Beach XP 510 Manual de usuario

Philips

Philips SHB6101 Manual de usuario

Jabra

Jabra PRO 9460 Duo Manual de usuario

HyperX

HyperX HyperX Cloud Flight Manual de usuario

Bose

Bose MIE2 Mobile Manual de usuario

Jabra

Jabra Steel Manual de usuario

HyperX

HyperX cloud ii Manual de usuario