Sony CDP-CE375 Manual de usuario

Compact Disc

Player

4-233-300-51(2)

CDP-CE375

Operating Instructions

Mode d’emploi

Manual de instrucciones

使用說明書

About this manual

The instructions in this manual is for CDP-CE375.

Tip

Instructions in this manual describe the controls on

the player.

You can also use the controls on the remote if they

have the same or similar names as those on the

player.

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

This appliance is classified as a CLASS 1 LASER

product. The CLASS 1 LASER PRODUCT

MARKING is located on the rear exterior.

AC power cord must be changed only at the qualified

service shop.

Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

To prevent fire, do not Cover the ventilation of the

apparatus with news papers, table-cloths, curtains,

etc. And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the apparatus.

Don’ throw a battery, this pose

it as the injurious wastes.

Table of Contents

Parts Identification 4

Front Panel ..............................................................................................................................4

Rear Panel................................................................................................................................5

Remote Control ....................................................................................................................... 5

Getting Started

Inserting Batteries Into the Remote Control............................................................................6

Hooking Up the System ..........................................................................................................6

Playing CDs

Loading the CD ....................................................................................................................... 7

Playing the CD –– Normal Play/Shuffle Play/Repeat Play..................................................... 8

Using the CD display ..............................................................................................................9

Replacing Discs While Playing a Disc ..................................................................................10

Programming the CD tracks ..................................................................................................11

Fading In or Out ....................................................................................................................12

Recording From CDs

Recording a CD by Specifying Tape Length (Time Edit).....................................................12

Adjusting the Recording Level (Peak Search) ......................................................................13

Additional Information

Precautions ............................................................................................................................14

Notes on CDs......................................................................................................................... 14

Troubleshooting..................................................................................................................... 15

Specifications ........................................................................................................................15

FRGB

CHECK w; (11, 12)

CLEAR 9(11, 12)

DISC 1–52(8, 9, 11)

Disc compartmentqj (7)

DISC SKIP8(7, 10, 12)

Display 3(9)

EX-CHANGE7(10, 13)

FADER qd (12)

PEAK SEARCH qs (13)

PHONES jack wa (9)

PLAY MODE qa (8, 9, 11, 13)

POWER 1(7)

Remote sensor qh (6)

REPEAT qf (8)

TIME qg (9, 10)

TIME EDIT ql (12)

Parts Identification

Front Panel

The items are arranged in alphabetical order.

Refer to the pages indicated in parentheses ( ) for details.

BUTTON DESCRIPTIONS

AOPEN/CLOSE ws (7, 9)

H4(8, 11, 13)

X5(9, 13)

x6(9, 13)

lAMSLdial 0(9, 11, 13)

m/Mqk (9, 12)

Rear Panel

Remote Control

Parts Identification

ANALOG OUT L/R jacks 2(6)

DIGITAL OUT OPTICAL jack 1(7)

Mains lead 3(6)

ANALOG OUT LEVEL +/– qs

(6, 7)

CONTINUE 2(8)

DISC SKIP 9(7, 10, 12)

PROGRAM 8(8)

REPEAT 3(8)

SHUFFLE 1(8)

TIME 0(9, 10)

BUTTON DESCRIPTIONS

N5(8, 11, 13)

X4(9, 13)

xqa (9, 13)

.AMS >6(9, 11, 13)

m/M7(9, 12)

Getting Started

Inserting Batteries Into

the Remote Control

You can control the player using the supplied

remote.

Insert two R6 (size AA) batteries by matching

the + and –on the batteries to the diagram

inside the battery compartment.

Insert the negative (–) end first, then push in

and down until the positive (+) end clicks into

position.

When using the remote, point it at the remote

sensor on the player.

Tip

When the remote no longer operates the system,

replace both batteries with new ones.

Note

•Do not leave the remote near an extremely hot or

humid place.

•Do not drop any foreign object into the remote

casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct sunlight

or lighting apparatuses. Doing so may cause a

malfunction.

•If you don’t use the remote for an extended period

of time, remove the batteries to avoid possible

damage from battery leakage and corrosion.

Hooking Up the System

Hookups

This section describes how to hook up the CD

player to an amplifier. Be sure to turn off the

power of each component before making the

connections.

Tip

You can adjust the analog output level to the

amplifier using the remote comes with this player.

Press ANALOG OUT LEVEL +/–on the remote.

You can reduce the output level up to –20 dB.

When you reduce the analog output level, “FADE”

appears in the display.

When you turn off the player, the analog output level

automatically returns to the maximum level.

Setting the voltage selector

(voltage selector equipped

models only)

Check that the voltage selector on the rear

panel of the player is set to the local power line

voltage. If not, set the selector to the correct

position using a screwdriver before connecting

the AC power cord to a wall outlet.

CD player

Audio input

(White) (L)

: Signal flow

Amplifier

To mains

Audio input

(Red) (R)

ANALOG

OUT

(Red) (R)

ANALOG OUT

(White) (L)

110 - 120 V220 - 240 V

Getting Started

Making digital hookups

If you have a digital component such as a

digital amplifier, D/A converter, DAT, or MD,

connect the component via the DIGITAL OUT

(OPTICAL) connector using the optical cable

(not supplied). Take off the cap and plug in the

optical cable.

Note that you cannot use the following

functions when making this connection:

•Fading In or Out (see page 12)

•Adjusting the output level using the

ANALOG OUT LEVEL +/–buttons on the

remote

Note

When you connect via the DIGITAL OUT

(OPTICAL) connector, noise may occur when you

play CD software other than music, such as a CD-

ROM.

Transporting the player

Before transporting the player, follow the

procedure below to return the internal

mechanisms back to their original position.

1Remove all the discs from the disc tray.

2Press AOPEN/CLOSE to close the

disc tray.

“no dISC”appears in the display.

3Wait for 10 seconds, then press

POWER to turn off the player.

POC-15

Optical cable (not supplied)

Digital component

CD player

Loading a CD

1Turn on the amplifier and select the CD

player position so that you can listen to

the sound from this player.

2Press POWER to turn on the player.

3Press AOPEN/CLOSE.

The disc compartment slides out.

4Place a disc on the disc tray with the

label side up.

5To place other discs, press DISC SKIP

and place the discs in the order you

want to play.

Each time you press the button, the disc tray

turns and you can place the discs in the

empty disc compartments. The player plays

the disc in front of you first.

6Press AOPEN/CLOSE to close the disc

compartment.

Playing CDs

When you play a CD single,

place it on the inner circle

of the tray.

Disc number

Playing CDs

DIGITAL

OUT

OPTICAL

DIGITAL

INPUT

OPTICAL

Repeat Play Operations

You can play the CD tracks repeatedly in any

play modes.

To activate the Repeat Play function, press

REPEAT until “REPEAT’appears in the

display.

Repeat only one track

Cancel Repeat Play

When you are in the Repeat Play function, the

player repeats the tracks as follows:

When the disc is

played in

Continuous Play

(ALL DISCS)

Continuous Play

(1 DISC)

Shuffle Play

(ALL DISCS)

Shuffle Play

(1 DISC)

Programme Play

(page 11)

Playing the CD

––Normal Play/Shuffle Play/Repeat

Play

This unit lets you play the CD in different play

modes.

1Press PLAY MODE repeatedly until the

mode you want appears.

2Press H.

Tips

•You can select the disc you want to start playing

first by pressing one of the DISC 1 –5 buttons.

•You can specify discs during ALL DISCS Shuffle

Play mode, and the tracks on the specified discs are

played in a random order.

Press DISC 1 –5 to specify the discs after Step 1.

Semi-circles appear around the specified disc

numbers in the display. To cancel the selected discs,

press DISC 1 –5 again. The semi-circles disappear.

To return to ALL DISCS Shuffle Play, press PLAY

MODE until “ALL DISCS SHUFFLE”appears in

the display.

•You can select the playing mode by pressing

CONTINUE, SHUFFLE, or PROGRAM on the

remote.

Select

ALL DISCS

(Continuous

Play)

1 DISC

(Continuous

Play)

ALL DISCS

SHUFFLE

1 DISC

SHUFFLE

PROGRAM

To play

All discs in the player

consecutively in the order of disc

number.

Only the disc you’ve selected.

All tracks on all discs in random

order.

All tracks on the specific disc in

random order.

The tracks on the CD in the

order you want them to be

played (see “Programming the

CD tracks”on page 11).

Press REPEAT

Until “REPEAT 1”appears

while playing the track you

want to repeat.

Until “REPEAT”or

“REPEAT 1”disappears.

The player repeats

All the tracks on all discs

All the tracks on the current

disc

All the tracks on all discs in

random order

All the tracks on the current

disc in random order

The same programme

Playing CDs

Other Operations

Stop playback

Pause

Select a track

Go to the next disc

Select a disc directly

Find a point in a track

Play tracks in random

order

Remove the CD

Adjust the volume

Tips

•You can adjust the analog output level with the

ANALOG OUT LEVEL +/–on the remote (page

6).

•You can adjust the headphones volume on the

remote. To adjust the volume, connect the

headphones to the PHONES jack and adjust the

volume with the ANALOG OUT LEVEL +/–on

the remote.

•If there is no CD in the player, “no dISC”appears

in the display.

Notes

•If “ ” appears in the display, the disc has

reached the end while you were pressing M. Press

mor turn lAMSLcounterclockwise to go

back.

•If you press ANALOG OUT LEVEL buttons on the

remote while recording, the recording level will

change even when it is preset on the tape deck, etc.

Using the CD display

You can check information about the disc using

the display.

In the stop mode

Press TIME.

The display shows the current disc number, the

total number of tracks, total playing time and

music calendar.

The information also appears when you press

AOPEN/CLOSE to close the disc tray.

The tracks numbered over 20 cannot be

displayed in the music calendar.

Notes on the disc number

indications

•The red circle around a disc number

indicates the disc is ready to be played.

•When all the tracks on a disc have been

played, the semi-circle around the disc

number disappears.

•When a disc compartment is recognized as

empty, the semi-circled disc number

disappears.

During normal playback

While playing a disc, the display shows the

current disc number, track number, playing

time of the track and the music calendar.

The track numbers in the music calendar

disappear after they are played.

Do this

Press x.

Press X. Press Xagain or

Hto resume play.

During play or pause, turn

lAMSLclockwise

(to go forward) or

counterclockwise (to go

backward)

(or press >( to go

forward) or . (to go

backward) on the remote).

Press DISC SKIP.

Press DISC 1 –5.

Press and hold Mor m

during playback, and

release at the desired point.

Press PLAY MODE until

“SHUFFLE”appears in the

display.

Press AOPEN/CLOSE.

Press ANALOG OUT

LEVEL +/–on the remote.

Total number of tracks Music calendar

Total playing time

Current disc number

continued

12345

678910

1 2 3 4 5

DISCSALL

TRACK

DISC

MIN

SEC

110 45 28

To check the remaining time

Press TIME during playback.

Each time you press this button while playing a

disc, the display changes as shown in the chart

below.

Playing time and number on the current track

tRemaining time on the current track t

Remaining time on the disc

Notes

•When the disc has more than 24 tracks, “––.––”

appears instead of the remaining time.

•The remaining time on the disc appears only when

the disc is played in Continuous Play.

Replacing Discs While

Playing a Disc

You can open the disc tray while playing a disc

so that you can check what discs are to be

played next and replace discs without

interrupting playback of the current disc.

1Press EX-CHANGE.

The disc tray opens and two disc

compartments appear. Even if the player is

playing a disc, it doesn’t stop playing.

2Replace discs in the compartments

with new ones.

The player plays the disc on the left side

compartment after the current disc, and then

the one on the right side compartment.

3Press DISC SKIP.

The disc tray turns and other two disc

compartments appear.

4Replace discs in the compartments

with new ones.

5Press EX-CHANGE.

The disc tray closes.

While the disc tray is open by

pressing the EX-CHANGE button

•If the playback of the current disc ends, the

player stops playing. If the disc is played in

1 DISC Repeat Play mode (see page 8), the

current disc starts playing again.

•In ALL DISCS Shuffle Play mode (see page

8), tracks are reshuffled on the current disc.

•In Programme Play mode (see page 11), only

the tracks on the current disc are played.

•Do not push the disc tray to close it in

Step 5, as you may damage the

player.

Using the CD display (continued)

Otros manuales para CDP-CE375

Tabla de contenidos

Idiomas:

Otros manuales de Reproductor de CD de Sony

Sony

Sony Walkman D-FJ211 Manual de usuario

Sony

Sony SCD-C222ES - Es Series 5 Disc Manual de usuario

Sony

Sony HCD-GPX555 Manual de usuario

Sony

Sony DVP-NS708H Manual de usuario

Sony

Sony CFD-V8L Manual de usuario

Sony

Sony DEJ017CK - Walkman Portable CD Player Manual de usuario

Sony

Sony CFD-G30 - Cd Radio Cassette-corder Manual de usuario

Sony

Sony CFD-350 - Boombox With Cd Manual de usuario

Sony

Sony SCD XA5400ES Manual de usuario

Sony

Sony CDP-791 Manual de usuario

Sony

Sony CDX-C9500 Manual de usuario

Sony

Sony CDX-GT780UI Manual de usuario

Sony

Sony CDP-CX235 - Mega Changer Guía de instalación

Sony

Sony CDP-227ESD Manual de usuario

Sony

Sony CDX-M9900 Operating Instructions (primary... Instrucciones de construcción

Sony

Sony D-E808 Manual de usuario

Sony

Sony MD Walkman MZ-R91 Manual de usuario

Sony

Sony Walkman D-NE240 Manual de usuario

Sony

Sony CFD-E95 - Cd Radio Cassette-corder Manual de usuario

Sony

Sony CFD-G55 - Cd Radio Cassette-corder Manual de usuario

Sony

Sony CFDG700CP - Xplod Boombox Manual de usuario

Sony

Sony CDP-C265 Manual de usuario

Sony

Sony CDP-C69ES Manual de usuario

Sony

Sony D-NE20 - Atrac Cd Walkman Manual de usuario

Manuales populares de Reproductor de CD de otras marcas

RCA

RCA RP-7923 Manual de usuario

Pioneer

Pioneer DEH-P3550MP XM Manual de usuario

Philips

Philips AZ1207 Manual de usuario

Philips

Philips CD582 Manual de usuario

Philips

Philips AZ 6821 Manual de usuario

Lasonic

Lasonic MSU-2020 Manual de usuario

THOMSON

THOMSON RCD150 Manual de usuario

Denon

Denon DCD-1420 Manual de usuario

Panasonic

Panasonic SJ-MR100 Manual de usuario

Onkyo

Onkyo DX-7210 Manual de usuario

Denon

Denon DVM-4800 Manual de usuario

JBL

JBL MR-32 Manual de usuario

RCA

RCA RCD152 Manual de usuario

Technics

Technics SL-PS770A Manual de usuario

Clarion

Clarion compact disc Manual de usuario

Philips

Philips Expanium AZ 1538 Manual de usuario

Rotel

Rotel RCD 975 Manual de usuario

Pioneer

Pioneer CLD-D790 Manual de usuario