• Do not attach your Laser Light Projector to a dimmer at any time as this may damage the laser itself.
• Unplug when not in use.
• Store in a cool dry place when not in use.
• Read and follow all instructions on the product and /or provided with the product.
• Before using or reusing, inspect the product carefully. Do not use the Laser Light Projector if there are any
cracks in the lens or the housing, cuts or frayed areas in the power supply cord or connection of the cord to
the plug, broken plug blades or any other damage that could be deemed a safety hazard.
• Do not directly cover the Laser Light Projector with cloth, paper, or any material not part of the product.
This could prevent heat dissipation or be a fire hazard.
• Do not hang ornaments or other objects from the cord or the Laser Light Projector.
• Do not mount or place near gas or electric heaters, fireplaces, candles or other similar heat sources.
• Keep away from children and pets.
DANGER: Do not intentionally shine into eyes or face.
LEGAL INFORMATION
READ AND KEEP THESE INSTRUCTIONS.
CAUTION: Any changes or modifications not expressly approved could void the user’s authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
WARNING: Lasers should not be projected at or within the
flight path of an aircraft within 10 nautical miles from an
airport. If your intended surface is within 10 nautical miles
of an airport, lower the angle of the laser light projector
so that no lasers point into the sky.
CAUTION: Do not use the Laser Light Projector in any
matter other than that intended by the manufacturer to avoid
exposure to hazardous laser radiation.
Do not attempt to open the Laser Light Projector under
any circumstance.
650
Max output <5mw
WAVE LENGTH 532-650nm
Class IIIa Laser Product
