SR-1C Wireless Rectal scanner’s Guider
4 Focus Position is provided in this system, press the area, position number will change
from 1 to 4, simultaneously the position moving point will change(Part 4 in main screen).
Dynamic Range can be adjusted from 40 to 110 by pressing the area.
Harmonic can be adjusted On/Off by pressing the area.
4 steps of image enhancement is provided in this system, press the area to change it from
1 to 4.
Click button 22 to show TGC setting, each line can be moved by swiping left and right. See
Figure3-3.
RESET is to set TGC to the default value.
When all is set, press any area of the screen to hide the setting window. All setting status
will be shown in part 25 in the main screen.
3.2.1 Gain & depth setting
Run the probe by pressing Run/Freeze button or switch on the probe, press button 3 and 4
in main screen to adjust the gain from 30 to 105dB. Gain value is shown in part 25 of the main
screen.
Run the probe, swipe the image area of the main screen to adjust the scanning depth from
40 to 100mm, depth value is shown in part 25 of the main screen.
3.2.2 Cineloop setting
Press Preset button 20 in main screen to show the setting window. See Figure 3-4.
Default setting is 100, press plus/minus to change the total numbers.
Show information is defaulted on, turn off it to hide setting information on screen.
Compound is defaulted off.
Figure 3-4 Cineloop setting
3.2.3 Scanning mode setting
Press button 10 to show the choice of scanning modes B/BM/Color/PDI/PW. See Figure 3-5.
