SonicWALL TZ400 Manual de usuario
View Page online: https://www.sonicwall.com/support/knowledge-base/sonicwall-tz400-wireless-tz400w-out-of-box/170503795770582/
SonicWall TZ400 Wireless (TZ400W) out
of box
Description
NOTE: Video Link: SonicWall TZ400 Wireless (TZ400W) Out of Box Video.The SonicWall TZ400
Wireless package includes the following
SonicWall TZ400 Wireless appliance
3 Antennas
One Ethernet Cable
One Power Adapter
One Power Cord
Quick Start Guide
NOTE: The included power cord is approved for use only in specific countries and regions. Before using a
power cord, verify that it is rated and approved for use in your location.
Front and Back Views of the SonicWall TZ400W
SonicWall TZ400W Port Descriptions
Cabling the SonicWall TZ400W as a Network Gateway
Locate the SonicWall ports X0 and X1, port X0 is also label as LAN and port X1 is also label as WAN.
Connect your Internet access device such as a cable or DSL modem to SonicWall WAN (X1 port).
Connect SonicWall LAN (X0 port) to your laptop or PC or to a Network Switch that to which your
network devices such as PCs, game consoles, Smart TVs, etc are connected.
Other ports such as X2, X3þÿ & can be assign to other networks.
Cabling Topologies
Option 1
Option 2
Power On SonicWall TZ400W
Plug the power cable into an appropriate power outlet (110 - 240 volts).
Appliance powers on and the orange LED blinks during the boot sequence. This process may take up to 2
minutes.
Access the SonicWall Admin User Interface
Connect a PC to the SonicWall LAN (X0) interface or a network switch connected to the LAN interface.
You will automatically receive an IP address from the SonicWall appliance.
Open a browser to https://192.168.168.168 for access to the SonicWall.
SonicWall TZ400W First time setupSetup Wizard walk through
For the first time access as the admin user, you will be offered a choice to use a Setup Wizard or go
directly to the SonicWall management Interface.
At the Setup Wizard Launch Page, click the Setup Wizard link here.
At the Setup Wizard Welcome Page
Click Next.
At the Admin Credentials pageThe Admin default login credentials are
Username: admin
Password: password
NOTE: Update the password for the admin user. This is recommended to keep the admin user secure.
Click Next
IP Configuration page
The WAN Interface will detect for a DHCP server to retrieve its IP configurations.
If no DHCP server is detected or if you wish to enter static IP parameters then click on the link Manual
Config.
Este manual sirve para los siguientes modelos
1
Otros manuales de Fuente de alimentación de SonicWALL
SonicWALL
SonicWALL SRA EX9000 Manual de usuario
SonicWALL
SonicWALL NSA 2650 Manual de usuario
SonicWALL
SonicWALL NSA 2650 Manual de uso y cuidado
SonicWALL
SonicWALL NSsp 12000 Manual de usuario
SonicWALL
SonicWALL NSa 3650 Manual de usuario
SonicWALL
SonicWALL High-End NSa Series Manual de usuario
SonicWALL
SonicWALL CSa 1000 Manual de uso y cuidado
SonicWALL
SonicWALL NSa 2700 Manual de uso y cuidado
SonicWALL
SonicWALL 01-SSC-0202 Manual de uso y cuidado
