Sonetonix CS-BP8-B Manual de usuario

User Manual

CS-BP8-B

Button panel, 8 programmable buttons, black faceplate

User Manual

CS-BP8-B

Button panel, 8 programmable buttons, black faceplate

CS-BP8-B User Manual

Aastro Electronics

Preface

Read this user manual carefully before using this product. Pictures shown in this

manual is for reference only, different model and specifications are subject to real

product.

This manual is only for operation instruction only, not for any maintenance usage. The

functions described in this version are updated till April 2015. Any changes of functions

and parameters since then will be informed separately. Please refer to the dealers for

the latest details.

All product function is valid till 2015-4-3.

Trademarks

Mentioned product model and logo are trademarks. Any other trademarks mentioned

in this manual are acknowledged as the properties of the trademark owner. No part of

this publication may be copied or reproduced without prior written consent.

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. It has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a commercial

installation.

Operation of this equipment in a residential area is likely to cause interference, in

which case the user at their own expense will be required to take whatever measures

may be necessary to correct the interference

Any changes or modifications not expressly approved by the manufacture would void

the user’s authority to operate the equipment.

CS-BP8-B User Manual

Aastro Electronics

SAFETY PRECAUTIONS

To insure the best from the product, please read all instructions carefully before using

the device. Save this manual for further reference.

Unpack the equipment carefully and save the original box and packing material for

possible future shipment

Follow basic safety precautions to reduce the risk of fire, electrical shock and injury

to persons.

Do not dismantle the housing or modify the module. It may result in electrical shock

or burn.

Using supplies or parts not meeting the products’ specifications may cause damage,

deterioration or malfunction.

Refer all servicing to qualified service personnel.

To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this

product near water.

Do not put any heavy items on the extension cable in case of extrusion.

Do not remove the housing of the device as opening or removing housing may

expose you to dangerous voltage or other hazards.

Install the device in a place with fine ventilation to avoid damage caused by

overheat.

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If

an object or liquid falls or spills on to the housing, unplug the module immediately.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to

the device before cleaning.

Unplug the power cord when left unused for a long period of time.

Information on disposal for scrapped devices: do not burn or mix with general

household waste, please treat them as normal electrical wastes.

CS-BP8-B User Manual

Aastro Electronics

Table of Contents

1. Introduction............................................................................................................... 1

1.1 Introduction to the Programmable Control Panel.................................................... 1

1.2 Features......................................................................................................... 1

1.3 Package List.................................................................................................... 1

1.4 Installation....................................................................................................... 2

2. Panel Descriptions......................................................................................................2

2.1 Front Panel......................................................................................................2

2.2 Side Panel.......................................................................................................3

2.3 Rear Panel...................................................................................................... 4

3. Connections.............................................................................................................. 5

3.1 System Diagram...............................................................................................5

3.2 Connection of Programming and Looping............................................................. 5

4. System Operations..................................................................................................... 7

4.1 USB Driver Installation...................................................................................... 7

4.2 Software Programming...................................................................................... 7

4.2.1 Main Menu............................................................................................8

Panel/Key setting.........................................................................................10

Action list................................................................................................... 12

Event setting...............................................................................................13

Event List................................................................................................... 20

5. Specification............................................................................................................22

6. Panel Drawing......................................................................................................... 22

7. Troubleshooting & Maintenance..................................................................................23

8. After-sales Service................................................................................................... 24

CS-BP8-B User Manual

Sonetonix 1

1. Introduction

1.1 Introduction to the Programmable Control Panel

The programmable control panel is a Wall Control Panel. Every button is

programmable and works either individually or together. The programmable control

panel is built in the programmable 3 RS232, 1 RS485,3 Infrared& 2 Relay, and 1 mini

USB for programming.

Please notice, RS232 (1) and IR2 share the same port, cannot be used at the same

time. Also, RS232 (2) and IR3 share the same port, cannot be used at the same time.

It can fully control our product, as well as third party devices such as projectors,

screens etc. It is an easy-to-use control device for presentation show rooms,

classrooms and boardrooms.

1.2 Features

Every button can be programmed to send the bi-direction RS232 and RS485

commands simultaneously to control third party devices.

Every button can be programmed to send the infrared code, control the relay, to let

them work simultaneously to control the third party devices.

Every button is built in the infrared code and RS232 code learning function, and

baud-rate setting.

ID looping function. 99pcs programmable control panels can be looped and

controlled together, by ID identifying.

Programmed by USB or RS232, working with the PC software (PS-WP).

Crystal and backlit buttons with easy user-friendly customizable changeable

labels.

The backlit brightness is controllable.

Dimension: 11.4cm long and 7cm wide.

1.3 Package List

1 x Programmable Control Panel

1 x Power adapter (DC 12V)

4 x Captive screw connector

3 x IR emit probe

1 x Button labels

1 x User Manual

Notes：Please confirm if the product and the accessories are all included, if not,

please contact with the dealers.

CS-BP8-B User Manual

Sonetonix 2

1.4 Installation

Follow the steps to install the device:

Firstly, dig a hole on the desk to the size marked on the aperture paper (shown in

Figure 1-1).

Secondly, put the device into the hole and adjust it to flush with the table (shown in

Figure 1-2).

Then, plug a set screw into the fixing mounting and screw the nuts tightly.

Figure 1- 1Aperture paper

Figure 1- 2 Installation Guide

2. Panel Descriptions

2.1 Front Panel

Crystal and luminescent, programmable buttons:

Every button can be programmable with the software PS-WP.

Connect the PC via USB or RS232.

And every label inside the button can be changeable. You can choose the label you

need and change it very easily like below:

CS-BP8-B User Manual

Sonetonix 3

(For the specific transparent paper table, please contact the local distributor or reseller

for it)

2.2 Side Panel

Note: When use this USB port to program the control panel’s buttons, the available

COM port number should not be more than 10.

Mini USB Connector:

1. Communicate with PC

which uses PS-WP to

programthe buttons.

2. Transmit the infrared

data when learning IR

(Optional).

Infrared sensor port:

receive and learn the IR

code, to build the IR

database.

CS-BP8-B User Manual

Sonetonix 4

2.3 Rear Panel

The programmable control panel has various ports in the rear panel, including Lopping

port, RS232 port, RS485 port, IR port, Relay port and Power port. Below is the

introduction:

1Power connector: 12VDC. Be sure that the “+” and “-” never be mixed or

wrong connection.

2Low-Voltage relay ports: set the relay on/off by software PS-WP.

3This port includes: RS232 (1)/IR2, IR1 and RS485.

a) RS232 (1)/IR2: share the same port, the detailed use depends on the setting of

PS-WP. When be used as RS232, it is unidirectional transmission, transmit

data but without receive.

b) IR1: for control other devices, it can be programmable by the PS-WP.

c) RS485:the RS485 can be programmed as different commands and control the

device with RS485 port. The command of RS485 is the same as RS232 (1).

4This port includes two parts:

One part is RS232 (2)/IR3, it can be used for control other devices or looping

output. RS232 (2) and IR3 share the same port, the detailed use depends on the

setting of PS-WP.

Other part is RS232 (3), it can be used for control other devices or looping output,

or connect with PC.

These two parts share the same grounding.

①

④

③

②

CS-BP8-B User Manual

Sonetonix 5

3. Connections

3.1 System Diagram

The programmable control panel can active different ports at one time. It means every

button can send the RS232 and RS485 commands, IR code and control the relay at

the same time. The demo system diagram as below:

3.2 Connection of Programming and Looping

The programmable control panel can be connected to the computer for programming,

to default the functions of every button. It can be connected by USB or RS232, working

with the PS-WP software. It is shown as below:

Tabla de contenidos

Manuales populares de Panel de control de otras marcas

RDZ

RDZ PC-HRX Manual de usuario

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manual técnico

Efka

Efka Variocontrol V810 Manual de usuario

Cebora

Cebora 208-10 Manual de usuario

AMX

AMX AutoPatch CP-15 Manual de usuario

Satel

Satel CA-6 KLED-S Manual de usuario

Evolution

Evolution IQ plus 800 Manual de usuario

Fagor

Fagor 8040 TCO CNC Manual de usuario

Trane

Trane ComfortLink II XL950 Control Manual de usuario

AKO

AKO PROCool AKO-17635-2 Manual de usuario

ABB

ABB 6136/30M-101 Manual de usuario

Telikou

Telikou BK-603 Belt Pack Manual de usuario

Mapei

Mapei Mapeheat Thermo Touch Manual de usuario

Bosch

Bosch D9412GV4 Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manual de usuario

Sminn

Sminn BOX L VF1L EI Manual de usuario

Balboa

Balboa TP600 Manual de usuario

Nice

Nice HSCU1 Especificaciones técnicas