SOMFY Dexxo Pro 800 Manual de usuario

Installation instruction for the gate drive

Series Dexxo

Before programming the drive, the upper gate's limit switch must be installed.

The drive uses a movement limiter as reference points for automatically setting the upper end position. Upper position

limiter (when the door is fully open).

[1] [2]

The engine rail mounting bracket should be mounted in the lintel or on the ceiling, however not more than

200 mm from the lintel (see drawing)

AUTOSET function, setting the gate end positions.

Dexxo Pro/io 800/1000 [N]

The condition for the correct course of the AUTOSET mode is the installation of the upper limit stop

and the coupling of the bogie with the gate.

The learning mode (AUTOSET) can be started each time the need arises.

The servomotor automatically selects the thrust force to the specic gate.

1. Press the key for approx. 2 seconds, the drive lamp will light up and go o. S2 will appear on the display.

2. Using the and buttons, move the chain / belt coupler until it engages with the guide arm (bogie). Long press

causes continuous closing movement. Long press causes a continuous opening movement.

3. Using the button close the gate by setting the lower end position.

4. Press to start the learning cycle (Autoset).

5. The gate will start a full OPEN / CLOSE cycle to automatically select the force.

6. C1 on the display - means conrmation of the correct execution of the Autoset function.

7. S0 or S1 is the negative result of the AUTOSET function. In this case, check the mechanics of the gate and try again.

Learning function, setting the gate end positions.

Dexxo Optimo 800N

The learning mode (AUTOSET) can be started each time the need arises.

The condition for the correct course of the AUTOSET mode is the installation of the upper limit stop

and the coupling of the bogie with the gate.

1. Press the key for approx. 2 seconds until the lamp switches on. The display range indicator light ashes .

2. Using the and buttons, move the chain / belt coupler until it engages with the guide arm (bogie). Long press

causes continuous closing movement. Long press causes a continuous opening movement.

3. Using the button close the gate by setting the lower end position. Release the key before the drive will force

the gate.

4. Press to start the learning cycle.

5. The gate will start a full OPEN / CLOSE cycle to determine the upper end position.

6. If the learning cycle has been successfully completed, the indicator light is on.

7. If the learning cycle has not been completed correctly, the indicator light continues to ash.

PROGRAMMING OF REMOTE CONTROLS - Dexxo: Optimo, Pro, io

Press and hold the key for approx. 2 seconds (the bulb will light up). Press the selected key on the remote control

(the bulb will start ashing).

Reprogramming the same remote control (channel) removes it from the Dexxo memory.

ERASE SETTING

Pressing the button for 7 seconds (the - lamp will go o - ashing) will erase all saved settings.

Detailed information about Somfy Dexxo engines can be found in the package with the engine.

DELETION OF REMOTE CONTROL

Pressing the button for 7 seconds (the lamp will light - go o - ashing) will erase all previously saved transmitters.

www.ekookna.com

1/2018

Otros manuales para Dexxo Pro 800

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Abridor de puerta de SOMFY

SOMFY

SOMFY FX230 Manual de usuario

SOMFY

SOMFY 3S io Manual de usuario

SOMFY

SOMFY SGS 501 Manual de usuario

SOMFY

SOMFY AXOVIA 220B RTS Manual de usuario

SOMFY

SOMFY Elixo 500 3S io Manual de usuario

SOMFY

SOMFY AXOVIA 220B RTS Manual de usuario

SOMFY

SOMFY AXOVIA MULTIPRO Manual de usuario

SOMFY

SOMFY tecnoShades NR0-Rn Manual de instalación

SOMFY

SOMFY TaHoma Instrucciones de instalación

SOMFY

SOMFY SGS 201 Manual de usuario

SOMFY

SOMFY Telis 1 io Manual de usuario

SOMFY

SOMFY AXOVIA 220B Manual de usuario

SOMFY

SOMFY SGS 501 Manual de usuario

SOMFY

SOMFY Rollixo Optimo RTS Manual de usuario

SOMFY

SOMFY Sonesse Ultra 50 DC RS485 Manual de usuario

SOMFY

SOMFY Axovia 220A Manual de usuario

SOMFY

SOMFY Elixo 500 3S RTS Manual de usuario

SOMFY

SOMFY FREEVIA 400 Manual de usuario

SOMFY

SOMFY EXAVIA 500 Manual de usuario

SOMFY

SOMFY Ixengo L 230V RTS Manual de usuario

SOMFY

SOMFY Ixengo L 24V Manual de usuario

SOMFY

SOMFY STRUXURE OUTDOOR Manual de usuario

SOMFY

SOMFY Elixo 500 230V RTS Manual de usuario

SOMFY

SOMFY Ixengo L 24V Manual de usuario

Manuales populares de Abridor de puerta de otras marcas

Elite

Elite CSW200UL Manual de usuario

CAME

CAME FROG-PM4 Manual de usuario

Aprimatic

Aprimatic ONDA 500 Manual de usuario

Turnstiles

Turnstiles FSW 900 Manual de usuario

Erreka

Erreka BUL BL33 Instrucciones de funcionamiento

Erreka

Erreka VULCAN S Manual de usuario

Beninca

Beninca R1-2 WBV Manual de usuario

Erreka

Erreka VULCAN D Manual de usuario

Motorline professional

Motorline professional FORT Manual de instrucciones

Beninca

Beninca BOB5024 Manual de usuario

AGA

AGA GATEMASTER 900 HD Manual de usuario

Chamberlain

Chamberlain MotorLift HC280ML Manual de usuario

Cardin

Cardin BL Series Manual de usuario

Westfalia

Westfalia 85 27 06 Manual de usuario

CAME

CAME F500 Manual de usuario

Extel

Extel VERA Manual de usuario

Comunello Automation

Comunello Automation ABACUS 220 Manual de usuario

CAME

CAME FA40230CB Manual de usuario