Solutions MS-HD72-12UE Manual de usuario
User Guide
MS-HD72-12UE
USB HD Video Conference Camera
Revision: 1.0 - July 2022
02
support@m4sol.com |www.m4sol.com
MS-HD72-12UE USER GUIDE
USB HD Video Conference Camera
Copyright Notice
All contents of this manual, whose copyright belongs to our corporation cannot be cloned, copied or translated without
the permission of the company. Product specifications and information which were referred to in this document are for
reference only. We may change, delete, or update any content at any time and without prior notice.
=========================================================================
This is class A production. Electromagnetic radiation at specific frequencies may aect the image quality of TV in home
environment.
ST ANDBY POWER
MS-HD72-12UE USER GUIDE
03
support@m4sol.com |www.m4sol.com
1 Note
2 Packing List
3 Quick Start
4 About Product
4.1 Features
4.2 Product Specification
4.3 Interfaces and Buttons
4.4 Dimension
4.5 Remote Control
4.6 RS232 Interface
4.7 Serial Communication Control
5 GUI Settings
5.1 MENU
5.2 EXPOSURE
5.3 COLOR
5.4 IMAGE
5.5 P/T/Z
5.6 NOISE REDUCTION
5.7 SETUP
5.8 COMMUNICATION SETUP
5.9 RESTORE DEFAULT
6 Network Function
6.1 Operating Environment
6.2 Equipment Installation
6.3 Internet Connection
6.4 Camera Controlled by LAN
6.4.1 Setup IP Address
6.4.2 Visit/Access Camera
6.5 Camera Controlled by WAN
6.5.1 Setup IP Controlled by Dynamic DNS
6.5.2 Camera Visiting via Dynamic DNS
6.5.3 VLC Stream Media Player Monitoring
6.6 Camera Parameter Setup
6.6.1 Homepage Introduction
6.6.2 Video Settings
6.6.3 Image Settings
6.6.4 Audio Settings
6.6.5 System Settings
6.6.6 Network Settings
6.6.7 Device Information
6.7 Download the Network Upgrade Program
7 Maintenance and Troubleshooting
04
04
05
06
06
07
08
08
09
10
11
12
12
12
13
14
15
15
16
16
17
18
18
18
18
18
18
20
20
20
21
21
22
22
24
25
26
26
27
28
28
29
Catalogue
04
support@m4sol.com |www.m4sol.com
MS-HD72-12UE USER GUIDE
Note
Packing List
• Electric Safety
Installation and operation must accord with electric safety standard.
• Caution to Transport
Avoid stress, vibration or soakage in transport, storage and installation.
• Polarity of Power Supply
The power supply of this product is DC 12V, polarity of the power supply plug drawing shows as
below.
• Installation Precautions
Do not grasp the camera lens when carrying it. Don’t touch camera lens by hand. Mechanical
damage may be caused by doing so.
Do not use in corrosive liquid, gas or solid environment to avoid any cover (plastic material)
damage. Make sure there is no obstacle within rotation range.
Please never power on before installation is completed.
• Do not Dismantle the Camera
We are not responsible for any unauthorized modification or dismantling.
Specific frequencies of electromagnetic field may aect the image of the camera!
When unpacking the package, check that all the supplied accessories are included:
MS-HD72-12UE USER GUIDE
05
support@m4sol.com |www.m4sol.com
Quick Start
1) Please check connections are correct before starting.
2) Connect the power adapter to the power connector on the rear panel of the camera. The power
indicator on the front panel of the camera turns on.
3) After the camera is powered on, it starts to initialize, upper right turns to the limit position, and
then the horizontal and vertical turn to the middle position. When the motor stops running, it means
that the initialization is completed. (Note: If preset 0 is saved, the PTZ will turn to preset 0).
Network Cable (Not Supplied)
USB Cable (Supplied)
RS232 Cable (Not Supplied)
3.5mm Audio Cable (Not Supplied)
DC 12V IN
Power Adapter (Supplied)
Power Cable (Supplied)
PC, Router or Switch,
TV, VCR with audio input
interface, Speaker
Microphone, etc.
NET H DMI RS232 USB3.0 LINE IN RS485 DC 1 2V
RS485 Cable (Not Supplied)
HDMI Cable (Not Supplied)
06
support@m4sol.com |www.m4sol.com
MS-HD72-12UE USER GUIDE
About Product
4.1 Features
• Full Function USB Interface
Full function USB interface, compatible with USB 3.0 and USB 2.0, support audio and encoding
output, and support the UVC
V1.1 protocol.
• 1080P Full HD
High-quality HD CMOS sensor with 2.07 million eective pixels for high-quality images up to
1920x1080.
• 72.5° Wide-angle-lens +16x Digital Zoom
The exclusively customized 72.5° high-quality ultra-wide-angle lens, support 12x optical zoom and
16x digital zoom.
• Low Illumination
The new CMOS image sensor with ultra-high SNR can eectively reduce the image noise under
low illumination. The application of 2D and 3D noise reduction algorithm greatly reduces the image
noise even under the condition of ultra-low illumination, it keeps the picture clean and clear, and
the SNR of image is as high as 55dB.
• PoE
The wired network supports PoE power supply, the control, power supply, video and audio can be
completed with a network cable.
• Remote Control
The camera can be controlled remotely through the RS232, RS485, network and
USB port.
• H.264 Slice/H.264 SVC
The H.264 stream supports Slice and SVC encoding modes, and suitable for high-end USB
conference video applications.
• Dual Stream
Support two stream output (YUY2, MJPEG, H.264 each of both) to reduce the host codec pressure.
• Multiple & Complete Interfaces
Support 1080P video output through HDMI, USB 3.0 and network simultaneously.
• Three Power Supply Modes
Simultaneously support USB 5V, 12V power adapter and PoE power supply.
• High Frame Rate
1080P output frame rate up to 60fps.
MS-HD72-12UE USER GUIDE
07
support@m4sol.com |www.m4sol.com
4.2 Product Specification
08
support@m4sol.com |www.m4sol.com
MS-HD72-12UE USER GUIDE
4.3 Interfaces and Buttons
4.4 Dimensions
1 2 3 4 5 6 7
NET H DMI RS232 USB3.0 LIN E IN RS485 DC 1 2V
32.00
155.00
1.90
STAN DBY P OWER
166.89
MS-HD72-12UE USER GUIDE
09
support@m4sol.com |www.m4sol.com
4.5 Remote Control
1
2
3
4
5
6
7
8
9
10
1
1
12
13
14
15
16
17
0
987
654
3
21
#
1 2 43
F1 F2 F3 F4
PRESET
CAMERA SELECT
STD REV
RESET
MENU
SLO W
BACKLIGHT P/T RST
FAR
FOCUS
ZOOM FA ST
10
support@m4sol.com |www.m4sol.com
MS-HD72-12UE USER GUIDE
4.6 RS232 Interface
2 1
345
678
Tabla de contenidos
