Solplanet Ai-LB 10K Manual de usuario

2 UM0039_Ai-LB 10k_EN_V01_0223

UM0039_Ai-LB 10k_EN_V01_0223 2

For the latest Power Box ins

tallation documents in all supported languanges, visit:

www.solplanet.net

WARNING

Read this entire document before installing or using Power Box . Failure to do so or to follow any of the

instructions or warnings in this document can result in electrical shock, serious injury, or death, or can damage

Power Box, potentially rendering it inoperable.

All information in this document is subject to copyright and other intellectual property rights of AISWEI LIMITED,

and its licensors. This material may not be modified, reproduced or copied, in whole or in part, without the prior

written permission of AISWEI LIMITED, and its licensors. Additional information is available upon request. The

following is trademark or registered trademark of AISWEI LIMITED.

All other trademarks contained in this document are the property of their respective owners and their use herein

does not imply sponsorship or endorsement of their products or services. The unauthorized use of any trademark

displayed in this document or on the product is strictly prohibited.

PRODUCT SPECIFICATIONS

All specifications and descriptions contained in this document are verified to be accurate at the time of

printing. However, because continuous improvement is a goal at AISWEI, we reserve the right to make

product modifications at any time.

The images provided in this document are for demonstration purposes only. Depending on product version

and market region, details may appear slightly different.

ERRORS OR OMISSIONS

To communicate any inaccuracies or omissions in this manual, please contact AISWEI.

ELECTRONIC DEVICE: DO NOT THROW AWAY

Proper Disposal of batteries is required. Refer to your local codes for disposal requirements

MADE IN CHINA

3 UM0039_Ai-LB 10k_EN_V01_0223

IMPORTANT SAFETY INSTRUCTIONS：

This manual contains important instructions for the Power Box that must be followed during installation and

maintenance of the system.

Power Box installation and service require knowledge of high voltage electricity and should only be performed by

AISWEI Certified Installers. AISWEI assumes no liability for injury or property damage due to repairs attempted

by unqualified individuals or a failure to properly follow these instructions. These warning and cautions must be

followed when using Power Box.

These symbols indicate important safety information in this guide or on the equipment:

Symbol

Explanation

Indicates a hazardous situation which, if not avoided, could result in injury or death.

Indicates a hazardous situation which, if not avoided, could result in minor injury or

damage to the equipment.

NOTE

Indicate an important step or tip that leads to best results, but is not safety or damage

related.

Indicates components that present risk of electrical shock.

Indicates location of combined input/output connector on the equipment.

Indicates location of grounding connection on the equipment.

Discharge time is 5 minutes from de-energization.

Indicates that user should refer to operating or installation instructions before proceeding.

UM0039_Ai-LB 10k_EN_V01_0223 4

General Information:

WARNING

A battery can present a risk of electrical shock, fire, or explosion from vented gases. Observe proper

precautions.

WARNING

Power Box installation must be carried out only by AISWEI Certified Installers who have been trained properly.

WARNING

Power Box is heavy. Use of Lift equipment is recommended.

WARNING

Do not use Power Box if it is defective, appears cracked, broken, or otherwise damaged, or fails to operate.

WARNING

Do not attempt to open, disassemble, repair, tamper with, or modify Power Box. Power Box and its components

are not user serviceable. Batteries in Power Box are replaceable. Contact the AISWEI Certified Installer who

installed the system for any repairs.

WARNING

To protect Power Box and its components from damage when transporting, handle with care. Do not impact,

Pull, drag, or step on Power Box. Do not subject Power Box to any strong force. To help Prevent damage, leave

Power Box in its shipping packaging until it is ready to be installed.

WARNING

Reading this entire document before installing or using Power Box. Failure to do so or to follow any of the

instructions or warnings in this document can result in electrical shock, serious injury, or death or can damage

Power Box, potentially rendering it inoperable.

WARNING

Use Power Box only as directed.

WARNING

Before beginning the wiring portion of the installation, ensure that Power Box is switched off, and open any

associated circuit breakers and disconnect switches (if applicable for the installation).

5 UM0039_Ai-LB 10k_EN_V01_0223

WARNING

Do not insert foreign objects into any part of Power Box.

WARNING

Do not expose Power Box or its components to direct flame.

WARNING

Do not install Power Box near heating equipment.

WARNING

Do not immerse Power Box or its components in water or other fluids.

CAUTION

Do not use solvents to clean Power Box, or expose Power Box to flammable or harsh chemicals or vapors.

CAUTION

Do not use fluids, parts or accessories other than those specified in this manual including use of non-genuine

AISWEI parts or accessories, or parts or accessories not purchased directly from AISWEI or a AISWEI-certified

party.

CAUTION

Do not place Power Box in a storage condition for more than one (1) month, or permit the electrical feed on the

Power Box to be served for more than one (1) month, without placing Power Box into a storage condition in

accordance with AISWEI’s storage specifications.

CAUTION

Do not paint any part of Power Box, including any internal or external components such as the exterior shell or

casing.

CAUTION

Do not connect Power Box directly to photo voltaic (PV) solar wiring.

UM0039_Ai-LB 10k_EN_V01_0223 6

CAUTION

When installing Power Box in a garage or near vehicles, keep it out of the driving path. If possible, install Power

Box on a side wall and/or above the height of vehicle bumpers.

Environmental Conditions:

WARNING

Install Power Box in a location that prevents damage from flooding.

WARNING

Operating or storing Power Box in temperatures outside its specified range might cause damage to Power Box.

WARNING

Do not expose Power Box to ambient temperature above 50 ℃or below -10 ℃.

CAUTION

Ensure that no water sources are above or near Power Box, including downspouts, sprinklers, or faucets.

CAUTION

Ensure that snow does not accumulate around Power Box.

Revision History：

Date

Revision

Description

Owner

2022-09-16

V1.0

Initial Release

Jin Hu

2022-10-25

V1.1

1. Update packing list

2. Update storage temperature: -20 to 60℃

Jin Hu

2022-11-18

V1.2

1.Optimize storage temperature

2.Optimize installation steps

Jin Hu

 
        7                                                                                                                                                              UM0039_Ai-LB 10k_EN_V01_0223                                                                                                                                 
 
Specification……………………………………………………………………………………………………………………………8 
Technical parameters……………………………………………………………………………………………………………….9 
Installation preparation…………………………………………………………………………………………………………….12 
1 Requirements for Installation Location.......................................................................................................... 12 
2 Tools .............................................................................................................................................................. 13 
3 Safety Gear ................................................................................................................................................... 13 
4 Dimensions and Space Requirements........................................................................................................... 14 
5 Unpacking Inspection ................................................................................................................................... 15 
Installation For Single Use…………………………………………………………………………………………………………16 
1System Cable Connection Diagram ............................................................................................................... 16 
2 Battery Ai-LB5K Fixation............................................................................................................................... 16 
3 Cable Connection For Single Use ................................................................................................................. 19 
4 Turn On the System....................................................................................................................................... 19 
Installation For Parallel Use……………………………………………………………………………………………………….20 
1 System Cable Connection Diagram.............................................................................................................. 20 
2 Battery Fixation and Front Panel Removal .................................................................................................... 21 
3 Cable Connection For Parallel Use ............................................................................................................... 21 
4 Set up Master Pack and Slave Pack ..............................................................................................................25 
5 Turn On the System.......................................................................................................................................26 
6 Reinstall the Front Panel and Close the Protective Cover. ........................................................................... 27 
7 Trouble Shooting ...........................................................................................................................................27 
8 Technical Support ......................................................................................................................................... 27 
9 Maintenance ................................................................................................................................................. 27 
Transportation and Storage………………………………………………………………………………………………………28 
Disclaimer…………………………………………………………………………………………………………………………….28 
 
 
 
 
 
 
 
 
 
 
 
 

UM0039_Ai-LB 10k_EN_V01_0223 8

1. Specification

Technical Parameters

Ai-LB 10K

Cell Type

LiFePO4

Battery unit Model

LB51100A

Number of Battery Units

2 sets of LB51100A

Rated Capacity

200Ah

Rated Battery Energy

10.24 kWh

Rated Voltage

51.2 V

Working Voltage Range

44.8-57.6 V

Usable Battery Capacity

10.24 kWh

Parallel Quantity1

4 sets in parallel (40 kWh)

Nominal Current

(Recommended) 2

0.5C,100 A

Battery Depth of

Discharge

90%

Battery Max

Charge/Discharge

Power

5.12kW/5.12kW

Available SOC Range

0% ~ 100%

SOC Transportation

Range

50%

Operating Temperature

Charging Temperature：0℃~55℃；

Discharge Temperature：-20℃～55℃

Storage Temperature3

-10°C ~ 50°C

Working Humidity

5~95%RH

Standard Charging

Current

0.5C (100A)

Maximum Charging

Continuous Current

0.5C (100A)

Rated DC Power

5.12kW

9 UM0039_Ai-LB 10k_EN_V01_0223

1: For more parallel, please contact the engineer of supplier

2: Performance may be de-rating in extreme ambient environmental conditions

3: Recommended storage temperature 10℃~30℃；

4: Working Condition 0.5 C @ 25 deg C, 80% DoD, 1 cycle per day

2. Technical parameters

Key parameters are listed below

CASE：

NO.

Key Item

Specification

Remark

2.1

Material

SGCC Steel, 1.2mm Thickness

2.2

Surface

Paint, Dove blue（RAL5014）,Fine sand

grain

2.3

Weight

~28Kg

Refer to actual

measurements

2.4

IP Level

IP65

2.5

Dimension

WDH：640*181*1017mm

Excluding connector

Bracket：

NO.

Key Item

Specification

Remark

2.6

Material

SGCC Steel, 1.5mm Thickness

2.7

Surface

Paint,Dove blue（RAL5014）,

Fine sand grain

2.8

Weight

~2.0Kg

Refer to actual

measurements

2.9

Dimension

WDH：480x13.5x500mm

Output Connector:

NO.

Key Item

Specification

Remark

2.10

Positive

2*PG19,White,IP67

Cable Diameter≤16mm

IP Grade

IP65

Recommended

Indoor/Outdoor Usage

Indoor/

Outdoor

Weight

~116Kg

(Not included wall mount)

Dimensions [W*D*H]

640*181*1017 mm

(Not included connector)

Communication

CAN/RS485/Dry Contact/WiFi

Certificate (LB51100A)

TUV/IEC 62619/IEC62040/IEC61000/UN38.3

Certificate (Ai-LB10K)

TUV/IEC 62619/IEC62040/IEC61000/UN38.3

Calendar Life4

10 Years

Cable Specification

Ai-LB 10K

Battery Cable Rating

100 A, each cable

Battery Cable Type

25 mm2OR 4AWG

Tabla de contenidos

Manuales populares de Generador portátil de otras marcas

Kohler

Kohler 20EORZ Manual de instrucciones

Powerhorse

Powerhorse 83171 Manual de usuario

HURST

HURST ML-630-SI Manual de usuario

ETQ

ETQ TG4000 Manual de usuario

Briggs & Stratton

Briggs & Stratton 40265 Guía de configuración

ConMed

ConMed 7550 Manual de usuario

Owon

Owon Waveform Generator Manual de usuario

evertz

evertz 7700 Series Manual de usuario

Power Stroke

Power Stroke PS906025 Manual de usuario

Firefly

Firefly Cygnus CYG2400/460/24 Manual de usuario

Draper

Draper PG950S Actualización de firmware

PowerBoss

PowerBoss PowerBoss Manual de usuario

SDMO

SDMO SH 4000 Manual de usuario

EINHELL

EINHELL STE 5500 Manual de usuario

Wanco

Wanco WI3000P Manual de usuario

Full Boar

Full Boar FBT-3300 Manual de usuario

Dwyer Instruments

Dwyer Instruments ASG Manual de usuario

Westinghouse

Westinghouse WH1000i Series Manual de usuario