2.2
Important safety instructions
The product has been designed and tested in accordance with international safety
requirements. As with all electrical or electronical devices, there are residual risks
despite careful construction. To prevent personal injury and property damage and to
ensure long term operation of the product, read this section carefully and observe all
safety information at all times.
DANGER
！
Danger to life due to high voltage of the battery！
When the battery system connected to the inverter, and the breaker is closed, the
batteries generate high DC voltage which is present in the DC cable and live compo-
nents.
• Do not touch non-insulated parts or cables.
• Do not touch the DC conductors.
• Do not touch any live components of the product.
• Do not open the product.
•All work on the product must only be carried out by qualied personnel who have
read and fully understood all safety information contained in this document.
•Disconnect the product from voltage sources and ensure it cannot be reconnect-
ed before working on the product.
• Wear suitable personal protective equipment for all work on the product.
•Make sure the circuit breaker is o before assembly.
laws, regulations or standards that apply to the installation, electrical safety and use
of the product.
WARNING
！
Danger to life due to electric shock from destruction of the measuring
device due to overvoltage！
Overvoltage can damage a measuring device and result in voltage being present in
the enclosure of the measuring device. Touching the live enclosure of the measuring
device results in death or lethal injuries due to electric shock.
• Only use measuring devices with a higher volatge range than the battery voltage.
QG0048_Ai-HB 050-200A_EN_540-300266-00_0223
