4
IMPORTANT SAFEGUARDS
Before you use your Party Fridge, please read this owner’s manual carefully.
Use this appliance only for its intended purpose as described in this owner’s manual.
This portable party cooler must be properly installed in accordance with the installation instructions before it
is used.
Never unplug you Party Fridge by pulling on the power cord. Always grasp the plug firmly and pull straight
out from the wall outlet.
1) Repair or replace immediately, all electric service cords that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion damage along its length, the plug or the connector end.
2) Unplug your Party Fridge before cleaning or before making any repairs. NOTE: If for any reason this
product requires service, we strongly recommend that a certified technician perform the service.
3) Do not operate your Party Fridge in the presence of explosive fumes.
4) The power supply must be properly grounded.
5) Do not use an adapter plug or extension cord.
6) Do not use the unit in the immediate surroundings of a bath, shower or swimming pool.
7) Before discarding or storing, we recommend that you remove the door and leave the shelves in place.
This will reduce the possibility of danger to children.
8) Do not store food in party fridge as the interior temperature may not be cool enough to prevent spoilage.
INSTALLATION BEFORE USE
It is advisable to clean the inside of the Party Fridge with lukewarm water using a mild detergent, and
then to dry it thoroughly prior to use.
The temperature in the appliance will depend on:
The temperature in the room
The frequency and duration of periods when the lid is open.
How many items are in the fridge
It may therefore be necessary to adjust the thermostat from time to time.
The refrigeration system of the cabinet is designed to operate with the cabinet located on a flat
surface. Avoid tilting the cabinet side.
If the cabinet must be tilted on an angle for handling or moving purposes, allow it to sit in an upright position
20 to 30 minutes prior to plugging it in and starting the cooling of the storage compartment.
