Solax TRIPLE POWER T-BAT LR25 Manual de usuario

T-BAT LR25

T-BAT LR36

User Manual

www.solaxpower.com

STATEMENT

No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language, in any form or by any

means without the prior written permission of SolaX Power Technology (Zhejiang) Co., Ltd.

Trademarks

and other symbol or design (brand name, logo) that distinguishes the products or

services offered by SolaX has been trademark protected. Any unauthorized use of above

stated trademark may infringe the trademark right.

Notice

All or part(s) of the products, features and services described in this document may not be

within your scope of purchase or usage. Unless otherwise specified in the contract, the

contents, information and recommendations in this document are provided as is, SolaX

makes no kind of warranties, guarantees or representations expressly or implicitly.

The content of the documents is continually reviewed and amended, where necessary.

However, discrepancies cannot be excluded. SolaX reserves the right to make

improvements or changes in the product(s) and the program(s) described in this manual at

any time without the prior notice.

The images contained in this document are for illustrative purposes only and may vary

depending on product models.

Please visit the website www.solaxpower.com of SolaX Power Technology (Zhejiang) Co.,

Ltd. for more information.

SolaX reserves all the right for the final explanation.

About This Manual

Scope of Validity

This manual is an integral part of T-BAT Series. It describes the installation,

electrical connection, commissioning, maintenance and troubleshooting

of the product. Please read it carefully before operating.

Battery Module

T-BAT LR25

T-BAT LR36

Note:

In the case of rack or cabinet installation, the whole battery system

contains battery module(s) and rack (or cabinet). In the case of wall

mounting, it contains battery module(s) only. For details, please refer to

the Chapter 11 “Technical Data”.

Target Group

The installation and maintenance can only be performed by qualified

personnel who

• Are licensed and/or satisfy state and local jurisdiction regulations.

• Have good knowledge of this manual and other related documents.

III

Conventions

The symbols that may be found in this manual are defined as follows.

Symbol Description

DANGER Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

WARNING Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION! Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

NOTICE! Provides tips for the optimal operation of the

product.

Change History

Version 00 (Jul. 11, 2023)

Initial release

Table of Contents

1 Safety ..........................................................................................................1

1.1 General Safety ....................................................................................................................1

1.2 General Safety Precautions ............................................................................................2

1.3 Battery Handling Guide....................................................................................................2

1.4 Response to Emergency Situations..............................................................................3

2 Product Overview ....................................................................................5

2.1 System Description ...........................................................................................................5

2.2 Appearance .........................................................................................................................5

2.2.1 Weight and Dimensions .....................................................................................6

2.2.2 Battery Module (T-BAT LR25/ T-BAT LR36)...................................................8

2.2.3 Indicators ................................................................................................................10

2.2.4 Symbols on the Label .........................................................................................13

2.3 Features ................................................................................................................................14

2.4 Certifications.......................................................................................................................14

3 Transportation and Storage ...................................................................15

4 Preparation before Installation..............................................................16

4.1 Selection of Installation Location .................................................................................16

4.1.1 Environment Requirement ................................................................................16

4.1.2 Installation Carrier Requirement......................................................................17

4.1.3 Clearance Requirement .....................................................................................18

4.2 Tools Requirement............................................................................................................20

4.3 Additionally Required Materials .....................................................................................20

5 Unpacking and Inspection .....................................................................21

5.1 Unpacking............................................................................................................................22

5.2 Scope of Delivery...............................................................................................................23

6 Mechanical Installation ...........................................................................27

6.1 Installation Options ...........................................................................................................27

6.2 Installation Procedure ......................................................................................................28

6.2.1 Installation Procedure with Rack .....................................................................29

6.2.2 Installation Procedure with Cabinet ...............................................................34

6.2.3 Wall Mounting .......................................................................................................42

7 Wiring..........................................................................................................48

7.1 PE Connection ...................................................................................................................48

7.2 Communication Connection (connecting to inverter) ..........................................50

7.3 Details of Cables ................................................................................................................52

7.4 Wiring Procedure ...............................................................................................................54

7.4.1 Wiring Procedure about Rack Installation.....................................................54

7.4.2 Wiring Procedure about Cabinet Installation...............................................58

7.4.3 Wiring Procedure about Wall Mounting ........................................................63

8 System Commissioning..........................................................................67

8.1 Checking before Power-on ............................................................................................67

8.2 Powering on the System..................................................................................................67

9 Troubleshooting and Maintenance ......................................................68

9.1 Power off the System .......................................................................................................68

9.2 Troubleshooting.................................................................................................................69

9.3 Maintenance........................................................................................................................73

10 Decommissioning....................................................................................74

10.1 Disassembling the Battery ..............................................................................................74

10.2 Packing..................................................................................................................................76

10.3 Disposing of the Rechargeable Battery.......................................................................76

11 Technical Data ..........................................................................................77

1 Safety

1.1 General Safety

The series rechargeable battery is well designed and tested to meet all applicable states and

international safety standards. However, like all electrical and electronic equipment, safety

precautions must be observed and followed during the installation of the rechargeable

battery to reduce the risk of personal injury and to ensure a safe installation.

Before installing the device, carefully read, fully understand and strictly follow the detailed

instruction of the

User Manual

and other related regulations. And the safety instructions in

this document are only supplements to local laws and regulations.

SolaX shall not be liable for any consequences caused by the violation of the storage,

transportation, installation, and operation regulations specified in this document, including,

but not limited to:

• Rechargeable battery damage due to force majeure, such as earthquake, flooding,

thunderstorm, lighting, fire hazard, volcanic eruption, overvoltage, etc.

• Rechargeable battery damage due to man-made cause

• Rechargeable battery used or operated against any items in local policy

• Failure to follow the operation instructions and safety precautions on the product

and in this document

• Installation and use under improper environment or electrical condition

• Unauthorized modifications to the product or software

• Rechargeable battery damage caused during transportation by the customer

• Storage conditions that do not meet the requirements specified in this document

• Failure to adequately maintain the equipment. An on-site inspection should be

carried out by a qualified technician after 120 months of continuous use. If more

than 120 months have been passed since the date of commissioning, or the user

cannot prove that the equipment has been adequately maintained

• Use of incompatible inverters or devices

• Installation and commissioning operated by unauthorized personnel who are not

licensed and /or satisfy state and local jurisdiction regulations.

Safety

1.2 General Safety Precautions

• Overvoltage or wrong wiring may damage the battery module and cause

combustion which may be extremely dangerous;

• Leakage of electrolytes or flammable gas may be occurred due to any type of

product breakdown;

• Do not install the battery module in places where flammable and combustible

materials are stored, and in which an explosive atmosphere is present;

• The battery module wiring must be carried out by qualified personnel;

• Battery module must be serviced by qualified personal;

• Ensure that the grounding cable is connected before handling the battery

module.

1.3 Battery Handling Guide

Do's

• DO keep the battery module away from flammables materials, heat sources, and

water sources;

• DO keep the battery module out of reach of children and animals;

• DO practice proper battery storage by keeping the battery module in a clean

environment, free of dust, dirt and debris;

• DO store the battery module in a cool and dry place;

• DO seal the outer cable connection hole to prevent ingress of foreign objects;

• DO confirm that the wiring of the device must be correct;

• DO install the device according to the local standards and regulations.

Don'ts

• DON'T expose the battery module to an open flame, or the temperature in excess

of 140°F/60°C;

• DON'T store or install the battery module in direct sunlight;

• DON'T install or operate the battery module in places where there is excessive

moisture or liquids;

• DON'T place the battery module in a high-voltage environment;

• DON'T disconnect, disassemble or repair the device by unqualified personnel.

Only a qualified personnel is allowed to handle, install and repair the device;

• DON'T damage the device by dropping, deforming, impacting, cutting or

Otros manuales para TRIPLE POWER T-BAT LR25

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Paquete de baterías de Solax

Solax

Solax TRIPLE POWER T-BAT LR25 Manual de usuario

Solax

Solax Pocket WiFi V3.0 Manual de usuario

Solax

Solax TRIPLE POWER T-BAT-SYS-HV-R2.5 Manual de usuario

Manuales populares de Paquete de baterías de otras marcas

Acumentrics

Acumentrics PACK-POWER SYSTEM Manual de usuario

ACDC Dynamics

ACDC Dynamics SPF12-50 Manual de usuario

Aegis

Aegis ABL-72020P Manual de usuario

Dyness

Dyness TowerESS Manual de usuario

Growatt

Growatt APX 5.0P-S0-US Manual de usuario

EGO

EGO BAX1300 Manual de usuario

CyberPower

CyberPower BCA Series Manual de usuario

Intermec

Intermec 700 Series Manual de usuario

Dometic

Dometic PLB40 Manual de usuario

V-TAC

V-TAC VT-48280-W2 Manual de usuario

Valence

Valence RT Manual de usuario

Nikon

Nikon MB-D14 Manual de usuario

IOGear

IOGear GBP24V Series Manual de usuario

Inventus Power

Inventus Power PROTRXion S-12V100-TRX-HD Manual de usuario

Clas Ohlson

Clas Ohlson PW-290A Manual de usuario

EINHELL

EINHELL MULTI-Ah Power X-Change Plus Manual de usuario

Samsung

Samsung EB-U3300 Manual de usuario

ECTIVE

ECTIVE LC Series Manual de usuario