3
Solarpower24.it by Barba S.r.l. – via Locchi, 3F – 47122-Forlì – Italia
Tel/What’s up +39 05431995799 – web www.solarpower24.it – email solarpower24@solarpower24.it
Thank you for purchasing LIO II-4810 Lithium battery module. Please read this manual before you install the battery.
Follow the instruction carefully during the installation process.
1. Safety Precautions
Reminder
1). It is very important and necessary to read the user manual carefully before installing or using the battery. Failure to
do so or to follow any of the instructions or warnings in this document can result in electrical shock, serious injury,
or death, or can damage the battery, potentially rendering it inoperable.
2) If the battery is stored for a long time, it is required to charge them every six months, and the SOC should be no less
than 90%;
3) Battery needs to be recharged within 12 hours, after fully discharged;
4) Do not expose cable outside;
5) All the battery terminals must be disconnected for maintenance;
6) Do not use cleaning solvents to clean the battery;
7) Do not expose battery to flammable or harsh chemicals or vapors;
8) Do not paint any part of the battery, include any internal or external components;
9) Do not connect the battery with PV solar wiring directly;
10) The warranty claims are excluded for direct or indirect damage due to the items above.
11) Any foreign object is prohibited to insert into any part of the battery.
Warning
1.1 Before Connecting
1) After unpacking, please check the product and packing list first, if the product is damaged or missing parts, please
contact the local retailer;
2) Before installation, be sure to cut off the grid power and make sure the battery is in the turned-off mode.
2) Wiring must be correct. Do NOT misconnect the positive and negative cables, and ensure no short circuit with the
external device.
4) It is prohibited to connect the battery and AC power directly.
5) The embedded BMS in the battery is designed for 48VDC, please DO NOT connect the battery in series.
6) Please ensure the electrical parameters of the battery system are compatible with related equipment.
7) Keep the battery away from water and fire.
1.2 In Use
1) If the battery system needs to be moved or repaired, the power must be cut off and the battery is completely
shutdown
2) It is prohibited to connect the battery with a different type of battery
3) It is prohibited to put the batteries working with faulty or incompatible inverter;
4) It is prohibited to disassemble the battery (QC tab removed or damaged);
5) In case of fire, only dry powder fire extinguisher can be used, liquid fire extinguishers are prohibited.
6) Please do not open, repair, or disassembly the battery except staff authorized. We do not undertake any
consequences or related responsibility which because of violation of safety operation or violating of design,
production, and equipment safety standards.
