Solar Stik SOLAR VENTURE 300W PHOTOVOLTAIC ARRAY Instrucciones de instalación

October 2020

OPERATOR AND MAINTENANCE MANUAL

FOR THE

SOLAR VENTURE 300W

PHOTOVOLTAIC ARRAY

P/N 19-1000010

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

Updated:2020108

Version 1.0

Solar Venture 300W PV Array Operator and Maintenance Manual

October 20202 |

Contents

GENERAL INFORMATION, THEORY OF OPERATION, AND EQUIPMENT DESCRIPTION

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Safety Information and Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Safety Information Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Fire Hazard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Recommended Fire Extinguisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Electric Shock Hazard Related to PV Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Environmental and Handling Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Wind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Impact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Dust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Equipment Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Kit Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

OPERATOR INSTRUCTIONS

Solar Venture 300W PV Array Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Position and Orient System Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Deploy the PV Array Support Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Install the Large Ground-securing Mesh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Install the Small Ground-securing Mesh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Install the PV Array on the Support Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connect the Solar Cable to the PV Panel Leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Connect PV Array(s) to Solar Only Input Port of Power Hub . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Position the PV Arrays for Optimal Power Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Derating, Solar Loading, and Airﬂow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Secure the Array to the Ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Disassembling and Repacking the PV Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

MAINTENANCE

Preventive Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

PV Array Conditional Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Measuring PV Array Voltages: Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Procedure to Measure PV Array Voc with a Multimeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

SUPPORTING INFORMATION

Technical Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

ABOUT SOLAR STIK, INC.

Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

| 3October 2020

Solar Venture 300W PV Array Operator and Maintenance Manual

List of Figures

Figure 1. Solar Venture 300W PV Array with ground securing ......................................................................................... 4

Figure 2. Solar Venture 300 W PV array with a small HPS ............................................................................................... 9

Figure 3. Solar Venture 300W PV Array components in transport case (top) and unpacked (bottom) .......................... 10

Figure 4. Working-space radius for the PV arrays and associated equipment .............................................................. 11

Figure 5. Deploying the PV array support frame ............................................................................................................ 12

Figure 6. Large ground-securing mesh installation ........................................................................................................ 13

Figure 7. Small ground-securing mesh installation ........................................................................................................ 14

Figure 8. Ground-securing mesh conguration for 30º array deployment ..................................................................... 15

Figure 9. Ground-securing mesh conguration for 60º array deployment ..................................................................... 15

Figure 10. Connecting array hooks to support frame..................................................................................................... 16

Figure 11. Locking the array into place on the support frame ....................................................................................... 16

Figure 12. Connecting the PV array to the Solar Cable.................................................................................................. 17

Figure 13. PV arrays connected to Solar Only Input ports of Power Hub ..................................................................... 18

Figure 14. Ground-securing sandbag placement .......................................................................................................... 20

Figure 15. Packing the Solar Venture 300W PV Array.................................................................................................... 21

Figure 16. Measuring PV array open circuit voltage Voc ................................................................................................ 23

Section Page(s) Description Date

Published June 2020

Revision History

Solar Venture 300W PV Array Operator and Maintenance Manual

October 20204 |

Introduction

The Solar Venture 300W Photovoltaic (PV) Array is designed to generate renewable power in

expeditionary applications where weight, rugged design, and extreme portability are factors.

The Venture design can be deployed on any terrain, and the PV array can generate up to 300 Watts

of power for applications where independence from traditional power sources is required:

• PV power generation for remote locations where fuel-driven generators are not an option

• Decreased fuel consumption in a Hybrid Power System (HPS)

• Peak-shaving to decrease reliance on power from utility or grid

The Solar Venture 300W PV Array is modular and scalable, allowing users to tailor power generation

capability to load requirements.

Setup requires no tools and the 300 W Array is “Plug & Play” compatible with Hybrid Power

Systems.

The mono-crystalline cells in the high efciency Venture-Series panels are laminated onto a carbon-

ber structure, which combines extremely high PV performance with incredibly light material for

an extraordinary watt-to-weight ratio. The Venture offers a superior integration of technologies to

provide the operator with highest power in the smallest renewable generator footprint.

Figure 1. Solar Venture 300W PV Array with ground securing

GENERAL INFORMATION, THEORY OF OPERATION, AND

EQUIPMENT DESCRIPTION

| 5October 2020

Solar Venture 300W PV Array Operator and Maintenance Manual

Your safety and the safety of others is very important. This manual provides guidance on safe

operating practices and how to achieve maximum performance from the Solar Venture 300W PV

Array. Always observe and follow all safety protocols outlined below:

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill you or

hurt you and others. All safety messages will follow the safety alert symbol and the word

“DANGER”, “WARNING”, or “CAUTION”. These words are dened as:

DANGER Indicates a hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING Indicates a hazardous situation which, if not avoided, could result in death or

serious injury.

CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or

moderate injury.

All safety messages will identify what the potential hazard is, how to reduce the chance of injury, and

what can happen if the instructions are not followed.

Product Safety Information and Instructions

This manual contains important safety instructions that must be followed during the installation and

operation of the PV array. Read all instructions and safety information contained in this manual.

Exercise caution when handling or operating equipment. Live power may be present.

Safety Information Labels

Solar Venture 300W PV Array Operator and Maintenance Manual

October 20206 |

Fire Hazard

Fire Types

Class A ﬁre - Fires in ordinary combustibles such as wood, paper, cloth, trash, and plastics.

Class B ﬁre - Fires in ammable liquids such as gasoline, petroleum, oil, and paint.

Class C ﬁre - Fires involving energized electrical equipment such as motors, transformers, and

appliances. Remove the power source and the class C re becomes a class A or B re.

Recommended Fire Extinguisher

NSN 4210-00-288-7219 Fire Extinguisher, Carbon Dioxide, 10 lb

Carbon dioxide is a liqueed gas, which is highly effective ghting class B and C res. These

extinguishers are ideal for areas where contamination and/or cleanup are a concern, such as data

processing centers, labs, and telecommunication rooms.

Use Sweeping Motion

WARNING

Only CO2(carbon dioxide) re extinguishers should

be used with this equipment.

Using the Fire Extinguisher

When using the extinguisher on a re, remember PASS:

Pull the pin.

Aim the nozzle or hose at the base of the re from a safe distance.

Squeeze the operating lever to discharge the re extinguishing agent.

Sweep the nozzle or hose from side to side until the re is out. Move forward or around the re as

the re diminishes.

Watch the area for reignition until the cause has been xed.

| 7October 2020

Solar Venture 300W PV Array Operator and Maintenance Manual

Electric Shock Hazard Related to PV Panels

WARNING

Standing water around the electrical equipment and/or intrusion of water into the System

components can increase the risk of electrical shock.

DON’T LET THIS BE YOU!

HIGH VOLTAGE: PV arrays and generators produce potentially lethal line voltages. When servicing

equipment, extreme care should be taken to protect against electrocution. Always work with another

person in case an emergency occurs. Disconnect power before checking controllers or performing

maintenance. Be sure the generator is properly grounded. Wear safety glasses whenever working on

any part of the System that requires exposure to mechanical or direct electrical contacts.

• PV panels produce electricity when exposed to sunlight.

• Live power may be present at multiple terminals.

• Never route the cables through standing water.

• All cables and connections should remain dry and should be inspected regularly to ensure safe

operating conditions.

Solar Venture 300W PV Array Operator and Maintenance Manual

October 20208 |

Environmental and Handling Precautions

This equipment is ruggedized, yet there are a few things the operator can do to prevent failures and

prolong the operational life of the product.

Water

• Do not operate equipment in or around standing water.

• Do not place cables that conduct electricity in or near

standing water.

Impact

The PV panels should be protected from being struck by

hard objects.

Dust

• This equipment is designed for operation in climates

where high levels of dust or other particulates may

exist.

• Clean the surface of the PV panels regularly to maintain

maximum output. Dirty panels produce less power.

Heat

• Heat and solar loading reduce efciency and life

expectancy. Shade products (except PV panels) to

prevent the negative effects of heat.

• PV panels should be placed so that they are exposed

to adequate airow.

Wind

It is imperative to properly secure the PV panels to

the ground using sandbags so they do not become

dangerous projectiles in high winds.

| 9October 2020

Solar Venture 300W PV Array Operator and Maintenance Manual

PV cells convert sunlight into electrical power. All PV cells are made of materials called

semiconductors that absorb photons when sunlight strikes the PV cell. The absorbed photons

then knock electrons loose within the PV cells, allowing them to ow, which produces an electrical

current. PV cells contain one or more electric elds that force the direction of electron ow. Placing

metal contacts on the top and bottom of a PV cell harnesses this current so it can power external

appliances, much like a traditional power generator.

On their own, PV cells produce a limited amount of power, but when arranged and electrically

connected in a PV panel, the power generated is directly related to how much cumulative current and

voltage the PV cell arrangement is congured for. The panel’s total output voltage and current will

determine its “watt” rating.

The cell conguration of the Venture 300 Array generates up to 300 W of DC power for an application.

Figure 2. Solar Venture 300 W PV array with a small HPS

Theory of Operation

Solar Venture 300W PV Array Operator and Maintenance Manual

October 202010 |

Kit Components

Solar Venture 300W PV Array

1Hard transport case

2 4-section foldable PV array

3 Ground-securing mesh (large and small)

4 Support frame

5 Sandbags (12 ea)

6Solar Cable (sold separately)

Figure 3. Solar Venture 300W PV Array components in transport case (top) and unpacked (bottom)

Equipment Description

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Panel solar de Solar Stik

Solar Stik

Solar Stik 24VDC HyPR 3000 Instrucciones de instalación

Solar Stik

Solar Stik 19-1000012 Manual de usuario

Manuales populares de Panel solar de otras marcas

Navitron

Navitron HFC-2 Manual de usuario

AXITEC

AXITEC 60-CELL Manual de usuario

thermital

thermital TSOL 20 N BLU Manual de usuario

AZO Digital

AZO Digital MPPT-3000 Manual de usuario

Clenergy

Clenergy PV-ezRack SolarTripod Manual de usuario

Beretta

Beretta SCF-20N Manual de usuario

moovo

moovo KSM001 Manual del producto

solarwatt

solarwatt EasyIn 60M Series Manual de usuario

Solarland

Solarland Portable Series Manual

Ubiquiti

Ubiquiti sunMAX Manual de usuario

Lippert

Lippert Furrion FSFP37MW-BL Manual de usuario

Sonnenkraft

Sonnenkraft GK5-HP Manual de usuario

REC

REC TwinPeak 2S Mono 72 Series Manual de usuario

Sunforce

Sunforce 50039 Manual de usuario

Flexsolar

Flexsolar C100 Guía

Süd Solar

Süd Solar 03005 Manual de usuario

Kodak

Kodak SP21 Manual de usuario

Carmanah

Carmanah Go Power! Solar Flex GP-FLEX-30 Manual de usuario