Socket 600 Series Manual de usuario
CHARGING STAND
USERGUIDE
©2023 Socket Mobile, Inc. All rights reserved. Socket®, the Socket Mobile logo, SocketScan®, DuraScan®, XtremeScan,Battery
Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Microsoft® is a registered trademark of Microsoft
Corporation in the United States and other countries. Apple®, iPad®, iPad Mini®, iPhone®, iPod Touch®, and Mac iOS® are
registered trademarks of Apple, Inc., registered in the U.S. and other countries. The Bluetooth® Technology word mark and logos are
registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Socket Mobile, Inc. is under license. Other
trademarks and trade names are those of their respective owners.
Charging Stand
PACKAGE CONTENTS
Micro USB
Charging Cable
*Table Mounting
Template
TOP VIEW
SCALE 1:1
2x DRILL DIA
3/32
”
3
5/16
”
Charging Stand TableMount Drill Template
Insert Lock
Leavespace ~2 mm-4 mm
User Guide
*Security Cable
*Optional
Charging Stand
USERGUIDE
Magnet
Hook
*Illuminates Red when connected to AC Power.
Charging Pins
Light*
Charging Cable
3
PRODUCT INFORMATION
Slot for security cable
Step 1 Step 2
Step 3 Step 4
4
*ATTACHING THE SECURITY CABLE
++
*Security cable comes Pre-installed for your
convenience. To remove, follow step 2 and
step 1.
Insert the post into the top of the base, lining up the marker on the post to
the unlock icon. Push down and turn the post towards the lock icon until
you hear a click. Run the USB cord through the channel at the bottom of
the base. 5
INSERTING THE POST TO THE BASE
The charging pins must align
to supply power to the reader.
The red light on the back of the
charging stand will illuminate and
the reader will beep twice.
6
CHARGING STAND OPERATIONS
Approximately
4-8 inches*
(10-20 cm)
7
CHARGING STAND OPERATIONS
*When set to Auto Scan with Socket Mobile’s 2D barcode readers
(D720, D740, D745, D750, D755, D760, S720, S740), the barcode
should be 4 to 8 inches away.
8
Two keyholes are provided on the Charging Stand base for an optional
installation on a wooden surface (screws and drill template included).
1. Place the Charging Stand on the drill template and position these in
the desired location. Rotate the Charging Stand to align with the solid
notch (not the dotted notch) on the template.
2. Rotate the Stand/template combination so the Socket Mobile logo
faces the direction you want the reader to aim.
3. Tape the template to the surface and remove the Charging Stand.
4. Drill two 3/32” holes through the drill marks on the template.
5. Tighten the two screws with about 1/4” of the screw head exposed.
6. Place the Charging Stand on the template aligned with the dotted
notch.
7. You can now tear away the template.
8. Twist the Charging Stand clockwise to lock the screws in the
keyholes.
OPTIONAL TABLE MOUNTING
TOP VIEW
SCALE 1:1
2x DRILL DIA
3/32
”
3
5/16
”
Charging Stand Table Mount Drill Template
Insert Lock
Leave space ~2 mm-4 mm
9
Magnet Magnet
Magnet Command barcode
for conguring Auto
Scan mode. Please
scan when reader is
disconnected
(ashing blue light).
Keyholes for table mounting
Notch for charging cable
Model:
Charging Stand
Do Not Expose To
Extreme Temperatures
Auto Scan
© 2019 Socket Mobile, Inc.
Made in Singapore
OPTIONAL TABLE MOUNTING
Please only scan command barcodes when reader is
disconnected (ashing blue light).
Charging Stand Modes
Auto Scan
Scan the barcode to enable Auto Scan.
This will allow the reader to
automatically scan barcodes without
pressing the scan button.
#FNB 41FBA50003#
Manual Mode - Normal (default)
Scan the barcode to congure the reader
back to normal. It will be in manual scan
mode even when placed in the stand or
cradle. #FNB 41FBA50000#
10
COMMAND BARCODES
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Cargador de baterías de Socket
