Snooper MY-SPEED DVR Manual de usuario
User manual
Page
3 What’s included?
4 Overview MYSpeedDVR
8Registering
9Start Up
System Requirements and Downloading
10 Downloading the AURA™ Camera Database
11 Installing Snooper
12 Power Connection & Charging
12 Charging the internal battery MYSPEED DVR
13 Charging the internal battery MYSPEED XL 1
15 Alerts and Warnings
19 Version (Hardware & Software)
20 Digital Video Recorder (MySpeed DVR only) 23
Bluetooth (MySpeed DVR only)
24 Pairing
Phonebook
Dialing
Call History
32 Settings
36 Troubleshooting Snooper Downloads
40 Specification MySpeed DVR
41 Specification My Speed XL
42 Specification My Speed Plus
43 Service Under Warranty
44 Accessories
Limited Warranty
45 Snooper End User License Agreement
Contents
6 Overview MySpeed XL
7 Overview MySpeed Plus
Gen1
EN Page 2 of 43
MY Speed combined V3.0 02/21
Return to contents
What’s included?
1 x Snooper satellite navigation system
1 x Micro-SD Card
1 x Windscreen Mounting Bracket
1 x In-car Charger
1 x TMC antenna
1 x USB Cable
1 x Mounting disc for dash mounting the bracket
1 x Additional Micro SD card for DVR (MySpeed DVR only)
PLEASE NOTE
Due to our desire to continually improve our products, the specication may change without notice.
EN Page 3 of 43
MY Speed combined V3.0 02/21
Return to contents
Overview MY Speed DVR
Front View
1. Power Button
Press and hold to switch on or o.
2. LED Power indicator
Status LED
On and Charging - Red LED
O and Charging - Red LED
On and using internal battery - Green LED
Fully charged - No LED
3 Touch screen LCD
4. Earphone jack (Earphones not included)
5. Micro-SD Card Slot
6. TMC/Video In socket ** TMC not used on MySpeed DVR
7. USB Socket
8. Emergency Record button
1
5
3
6
4
2
7
8
** Video In The video-in connection is for connecting a rear view or reversing camera (not supplied) to the unit. The socket on the
device is a 2.5mm jack.
The unit will automatically switch the screen image to show the image from the rear camera once the device receives a video signal
from the rear camera - please refer to the camera tting/wiring instructions for details on connecting the camera to the vehicle.
Rear view cameras are designed as a guide only and drivers should still be aware of their surroundings and take care when reversing.
EN Page 4 of 43
MY Speed combined V3.0 02/21
Return to contents
Overview
My Speed DVR Rear View
9. MicroSD Card Slot**
10. Speaker
11. DVR HD camera lens
11
9
10
MicroSD for DVR
The microSD card is highly sensitive and can become defective due to changes in external environment or severe impact. Protect the
card against impact and damage. Snooper will not be held responsible in the event of microSD card damage due to user negligence
or external factors.
Specication for DVR MicroSD
Capacity up to 32GB
Speed Class 6 or above and support HD and SDHC
Estimated recording time 4GB: 1 to 1.5hrs 8GB: 1.5 to 3hrs 16GB: 3 to 5hrs 32GB: 5 to 10hrs
** The 1st time the My Speed DVR is used the DVR SD card will require formatting. Refer to page 73 for instruction on how to
format the card OR If a MicroSD card which was not supplied is going to be used it MUST be formatted using the Snooper player
BEFORE being used.
EN Page 5 of 43
MY Speed combined V3.0 02/21
Overview MySpeed XL
Front View
1. Power Button
Press and hold to switch on or o.
2. LED Power indicator
Status LED
On and Charging - Solid Red LED
On and fully charged – No LED
O and charging – Red LED
O and fully charged – Blue LED
3 Touch screen LCD
4. Earphone jack (Earphones not included)
5. Micro-SD Card Slot
6. USB Socket
7. Reset (on the rear of the unit )
1
5
3
4
6
7
2
Note: Please note that these are advisory speed limits ONLY.
Always check the roadside speed limit signs and abide by local driving regulations and
laws in the country you are travelling. It is the responsibility of the driver of the vehicle
to ensure that they are driving within the posted speed limits at all times.
EN Page 6 of 43
MY Speed combined V3.0 02/21
Return to contents
Registering
IMPORTANT!
PLEASE READ BEFORE USING.
To enable to locate Fixed Speed Cameras and Accident Black spots you will have to register and download the AURA™ Camera
Database.
Please Note: CAMERAS ARE PRE INSTALLED ON THIS DEVICE .
Register Online
Go to the official website www.snooperneo.co.uk and register your unit online.
Please Note: To register, you will need the serial number of your unit which can be found on the back of the device.
Currently Speed camera updates are free of charge on My Speed DVR, My Speed XL and Speed Plus ***
** Prices subject to change.
PLEASE NOTE
Due to our desire to continually improve our products, the specication may change without notice.
EN Page 7 of 43
MY Speed combined V3.0 02/21
Return to contents
Start Up
Switch on the device by pressing and holding the standby power button located on
the top of the unit for 2 seconds. The Snooper will automatically synchronise with
the Micro-SD Card. Once the synchronisation is completed, the Micro-SD Card will
not function with any other device. Snooper is now ready to operate and the camera
database can be downloaded if necessary. NOTE: In most cases the Micro-SD card is
already installed in the device.
Please note that if the unit does not activate when you press and hold the standby power button for 2 seconds it may require
charging. Refer to the section ‘Charging the internal battery’ later in this manual.
System Requirements and Downloading
Before you can begin to download the AURA™ database onto Snooper, you will need to install the Snooper Updater software
provided on the software CD.
In order for the software to be installed successfully, there are certain minimum hardware and software requirements needed.
Minimum Hardware Requirements
The computer must have an Intel Pentium Class processor or equivalent, a minimum of 32MB of RAM, a monitor with 256 (8-bit)
colours or greater, 20MB of free disc space and a spare USB connection.
Minimum Software Requirements
The software will only operate on the following Windows based operating systems:
Windows Vista
Windows 7, 8 and 8.1 and Windows 10
Mac iOS X - Yosemite, El Capitain and Sierra
Download software for Mac from: http://www.snooperneo.co.uk/SoftwareMac.cfm
Download PC software f rom: https://www.snooperneo.co.uk/SoftwareSpeedTrap.cfm?type=270
NOTE: Snooper Updater software does not support Windows 95, 98, Millennium, 2000, XP.
Once the software is installed, you are ready to download the speed camera database onto Snooper. Once the initial setup is
completed the speed camera updater software icon is displayed on your desktop.
EN Page 8 of 43
MY Speed combined V3.0 02/21
Return to contents
Downloading the AURA™ Camera Database
Please Note: You must register Snooper before you can perform a download.
Performing a download is simple.
1. Power up My Speed XL by pressing and holding the power button for
2 seconds and ensure that the computer is connected to the Internet.
2. Double left click the My Speed Camera Updater’ icon on your
desktop.
3. On the software in the top left hand corner, left click ’Menu’ and then
‘Download Settings’.
Note: When you run the program for the first time, you will be asked
to select the program language and download settings based on
your vehicle type and what coverage of camera alerts you require.
4. Connect the My Speed XL using the USB cable provided.
5. The updater software will then start to run automatically and
download the database files that you have selected onto your unit.
The download process is as follows:
The software will display the serial number of the Snooper and a progress bar will start to progress across the screen.
The software will then connect to our database server and then download** the speed camera database.
The Snooper will then save the data received.
The software will indicate that the download is complete and will instruct you to disconnect the Snooper from your PC. Close the
camera updater program by clicking the ‘x’ situated in the top right hand corner of the updater window.
**If you have a Firewall on your computer, the Firewall software may inform you that the updater software is trying to access the
internet. Please make sure that you grant/allow/permit access to the updater program through the Firewall.
Please read the messages supplied by your Firewall software carefully before choosing your option. If you do not allow the program
to access the internet through the Firewall, the download process will fail.
Plug the
USB cable into
the USB socket on the
side of the Snooper
Warning:
On a Windows 10 PC, when you connect the unit to the PC a pop up window will appear :
Never format the disk
Click Cancel
EN Page 9 of 43
MY Speed combined V3.0 02/21
Return to contents
Installing
Snooper comes with a windscreen bracket so that the unit can be mounted onto your vehicles windscreen.
When installing Snooper please ensure that:
The unit, with its built in GPS antenna has a clear view of the sky.*
It is located in a position where you can easily view the LCD display without having to take your eyes too far from the road ahead
and that you can reach the controls safely.
Does not interfere with the vehicles controls.
Does not jeopardise the drivers or passengers safety.
You will be able to remove the device to perform downloads.
For the optimum performance or the DVR, we recommend that the unit is placed in the centre of the windscreen (right to left)
either attached to the windscreen or the dashboard facia (using the mounting disc provided) The unit must not obscure you view
of the road ahead. (MySpeed DVR Only)
PLEASE NOTE: Be careful to choose a location that does not block the drivers view or where it might endanger the driver or
passengers should your vehicle suddenly come to a stop or be involved in an accident.
Installing Snooper using the Windscreen Suction Cup bracket
You can mount Snooper to the inside of your vehicles windscreen using the windscreen bracket provided.
Clean the area where you wish to position the bracket thoroughly with a good
quality glass cleaner. This allows a more secure seal on the windscreen.
Place the suction cup and bracket on the windscreen and push the locking lever
towards the windscreen to secure the bracket.
Adjust the angle of the bracket so that when the unit is attached to it you can view
the display and operate the controls safely.
Position Snooper onto the bracket, by inserting the bottom of the unit rst and
nally clipping the top of the bracket into the slot on the top of the unit. To remove
Snooper, simply unclip the unit by pushing the top of the bracket and taking the
unit from the holder.
Snooper can be powered directly either from the internal battery if it is fully
charged or powered from the cigarette lighter socket. To use the cigarette lighter
socket, plug the USB connector on one end of the power cable into the USB socket
on the side of Snooper and plug the larger plug into the cigarette lighter socket of
your vehicle.
Please Note: Only use the cigarette lighter power cable provided with Snooper. Snooper operates on 5V and using any other
cigarette lighter power cable will damage your device and void the warranty.
Locking
lever
Bracket
adjusters
EN Page 10 of 43
MY Speed combined V3.0 02/21
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de salpicadero de Snooper
Snooper
Snooper DVR-4HD Manual de usuario
Snooper
Snooper DVR-4HD Manual de usuario
Snooper
Snooper My-Speeed DVR Manual de usuario
Snooper
Snooper DVR-4HD Manual de usuario
Snooper
Snooper Syrius Pro Manual de usuario
Snooper
Snooper DVR-1HD Manual de usuario
Snooper
Snooper DVR-PRO Manual de usuario
Snooper
Snooper DVR-5HD Manual de usuario
Snooper
Snooper DVR-2HD Manual de usuario
