Snom 300 Manual de usuario
SNOM300 USER MANUAL
!
!
!
Thank you for purchasing Snom300.
Make!sure!and!acknowledge!that!you!have!read!this!manual!before!using!Snom300.!
!
!
Package Contents:
1. Main Case
2. Handset
3. Handset Cable
4. AC Power Adaptor
5. Quick Start Guide manual
Disclaimer
* This document is subject to change without prior notice.
* A possibility of noise, broken voice, or disconnection may occur because of customers’
or our network environment. We cannot guarantee the quality of voice.
* The company assumes no responsibility on the difference of call or voice quality when
the hearing acuity of individuals is concern.
* The company assumes no responsibility when it was used outside Japan.
* As for SNOM300 regular server maintenance, you may experience temporarily service
stops without prior notice.
* The company assumes no responsibility when the customers caused the phone primary
source of malfunction or breakdown.
!
Maintenance/Cleaning
Please use soft dry clothes to clean the device.
Don’t use wet clothes.
Don’t use volatile chemical like benzene, or thinner since they can damage the device.
If you want to use a chemical wipe, please read the cautionary notes before using it.
Connection Method:
1. Connect the handset cord in the handset and connect it on the main body.
2. Plug the Ethernet (network cable into the RJ 45 connector labeled [Net] and plug the
other end into the network side to establish a data link.
3. The second RJ45 connector, labeled [PC], is for chaining further Ethernet devices
without the need for a second Ethernet connection line.
4. Insert the plug of the power supply into the connector labeled [DC 5V] and hooks up
the casing into the mains.
5. If you want to use a headset, connect it to the RJ audio jack on the bottom shell of the
phone.
!
SNOM300
SNOM300 is a phone device that can be used with our service. It cannot be used as a
typical phone. The customer must subscribe to an Internet Service Provider to be able to
use the device. Customer with no broadband router feature must provide a separate
broadband router.
Keypad Familiarization
1. Navigation key – for navigation
within the display menu and the phone
book.
2. Enter key – to confirm actions,
selections and inputs.
*Always press the “ENTER
Key” after inputting the numbers dialed
3. Cancel Key – to cancel actions or
inputs.
4. LED for MWI - (Message Waiting
Indicator)
5. Volume Key – key to adjust the
volume to (lower/higher)
6. Speaker - turns the speaker on/off
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
General Settings
1. Verify device’s IP Address. Press the Navigation key [Down Arrow] !Select
[Information IPAdr] and Press enter [Check] button.
2. Snom300 and the PC must be connected to the same network. Launch any web
browser such as Internet Explorer. Enter IP Address observing the format below.
http: // (IP address)
Example: If the IP address is written as 192.168.001.002 , it should be entered
as http://192.168.1.2/
3. On the [Setup] options, select [Identity 1].
Display Name and Account: Enter [Unique ID].
Password: Enter [Registered Password] (sent thru mail).
* If you changed password, enter your new password.
Registrar and Outbound Proxy: Enter [Login Server].
Authentication Username: Enter [Unique ID].
Display Text for Idle Screen: Enter [Extension Number].
* Click [Apply] to save changes.
* Click [Play ringer] to confirm your ringing tone. You can also listen through your
device, and make sure to check the device’s volume.
4. On the [Setup] options, select [Identity 1], then click [NAT].
Keepalive Interval (seconds): Enter [20] seconds.
* Click [Apply] to save changes.
5. On the [Setup] options, select [Preferences].
!
Web Interface Language: Select [English].
Language: Select [English].
Number Display Style: Select [Number].
Tone Scheme: Select [Japan].
* Click [Apply] to save changes
6. On the [Setup] options, select [Advanced]
NTP Time Server: Enter [ntp.jst.mfeed.ad.jp].
NTP Refresh Time (sec): Enter [3600]
Timezone: Select preferred time zone
* Click [Apply] to save changes.
!
!
!
!
!
!
!
!
!
7. On the [Setup] options, select [Advanced], then click [Audio].
!
!
Call Waiting Indication: Select [OFF].
* Click [Apply] to save changes.
!
!
!
!
!
!
!
!
!
8. On the [Setup] options, select [Advanced], then click [SIP/RIP]
!
!
!
Time Support (RFC4028): Select [OFF].
* Click [Apply] to save changes
Otros manuales para 300
22
Tabla de contenidos
Otros manuales de Teléfono de Snom
Snom
Snom C300 Manual de usuario
Snom
Snom 765 Manual de usuario
Snom
Snom 300 Manual de usuario
Snom
Snom 3XX SERIES Manual de usuario
Snom
Snom D717 Manual de usuario
Snom
Snom M-SC Series Manual de usuario
Snom
Snom M9 Manual de usuario
Snom
Snom 870 Manual de usuario
Snom
Snom 300 Manual de usuario
Snom
Snom 300 Manual de usuario
Snom
Snom 220 Guía rápida
Snom
Snom M58 Manual de usuario
Snom
Snom M700 Manual de usuario
Snom
Snom D120 Manual de usuario
Snom
Snom 370 Manual de instrucciones
Snom
Snom M45R SC Manual de usuario
Snom
Snom C300 Manual de usuario
Snom
Snom 320 Manual de usuario
Snom
Snom HD100 Manual de usuario
Snom
Snom 710 Manual de usuario
