Snell IQOTR40 Manual de usuario
User Manual
IQOTR40, IQOTR41, IQOTR42,
IQOTR43, IQOTR44, IQOTR45
IQOTR99
3G/HD/SD-SDI Multi-Channel Fiber
Transceiver
snellgroup.com
IQOTR40/41/42/43/44/45/99 www.snellgroup.com
Contents
Module Description........................................................................................................................... 3
Block Diagram................................................................................................................................... 3
Rear Panel View............................................................................................................................... 3
Order Codes ..................................................................................................................................... 4
Feature Summary............................................................................................................................. 5
Technical Profile ............................................................................................................................... 6
Inputs and Outputs........................................................................................................................ 6
Controls......................................................................................................................................... 6
Specifications................................................................................................................................ 7
Connections...................................................................................................................................... 9
SDI Inputs...................................................................................................................................... 9
Fiber Inputs ................................................................................................................................... 9
SDI Outputs................................................................................................................................. 10
Fiber Outputs............................................................................................................................... 10
Card Edge Controls ........................................................................................................................ 11
Controlling the IQOTRXX from the RollCall Control Panel............................................................. 12
Unit Status................................................................................................................................... 12
System-Setup Screen ................................................................................................................. 13
SDI-Inputs 1-4 Screen................................................................................................................. 14
Fiber-Inputs 1-4 Screen............................................................................................................... 16
Output-Fiber Screen.................................................................................................................... 18
System-Memory 1-16 Screen...................................................................................................... 19
Logging........................................................................................................................................ 20
RollCall Log Fields................................................................................................................... 25
System-RollTrack Screen............................................................................................................ 27
This information applies to the transceiver modules in the Optical Converter Platform range. In the
case of the IQOTR99, some of the RollCall screens will be missing if the SFPs for the channels
associated with those screens are not fitted and, in some cases, although the screen will be
present, the group boxes or controls associated with particular channels will be missing or
disabled.
The different versions of the standard product simply have different wavelength fiber transmitters
fitted.
Issue 1 Rev 2 © 2012 Snell Limited
Page 2
IQOTR40/41/42/43/44/45/99 www.snellgroup.com
Module Description
The IQOTR40-45 range converts four single mode fiber optic signals to four 3G/HD/SD-SDI
outputs and four 3G/HD/SD-SDI signals to four single mode fiber optic outputs. The unit is
available in single or dual width versions with either DIN1.0/2.3, HDBNC or BNC connectors.
The IQOTR99 is a special version of the product with a partial fit of channels and/or with non-
standard combinations of transmitter wavelengths.
Block Diagram
Rear Panel View
Single width Fibre and DIN1.0/2.3 (IQOTR4_78-1A3)
Single width Fibre and HD BNC (IQOTR4_79-1A3)
Double width Fibre and BNC (IQOTR4_80-2A3)
Issue 1 Rev 2 © 2012 Snell Limited
Page 3
IQOTR40/41/42/43/44/45/99 www.snellgroup.com
Order Codes
Versions of the module cards available are:
SFP fit options for different wavelength operation.
CH1/2 CH3/4
IQOTR40 Dual 1310nm Dual 1310nm
IQOTR41 Dual 1550nm Dual 1550nm
IQOTR42 1270/1290nm 1310/1330nm
IQOTR43 1350/1370nm 1390/1410nm
IQOTR44 1470/1490nm 1510/1530nm
IQOTR45 1550/1570nm 1590/1610nm
IQOTR4078-1A3 3G/HD/SD-SDI multi-channel fiber transceiver. 4 x 3G/HD/SD-SDI inputs
(DIN 1.0/2.3), 4 x 1310nm optical outputs.
IQOTR4079-1A3 3G/HD/SD-SDI multi-channel fiber transceiver. 4 x 3G/HD/SD-SDI inputs
(HD-BNC), 4 x 1310nm optical outputs.
IQOTR4080-2A3 3G/HD/SD-SDI multi-channel fiber transceiver. 4 x 3G/HD/SD-SDI inputs
(BNC), 4 x 1310nm optical outputs.
IQOTR4178-1A3 As IQOTR4078-1A3 but fitted with 1550nm optical transmitters
IQOTR4179-1A3 As IQOTR4079-1A3 but fitted with 1550nm optical transmitters
IQOTR4180-2A3 As IQOTR4080-2A3 but fitted with 1550nm optical transmitters
IQOTR4278-1A3 As IQOTR4078-1A3 but fitted with 1270-1330nm CWDM optical transmitters
IQOTR4279-1A3 As IQOTR4079-1A3 but fitted with 1270-1330nm CWDM optical transmitters
IQOTR4280-2A3 As IQOTR4080-2A3 but fitted with 1270-1330nm CWDM optical transmitters
IQOTR4378-1A3 As IQOTR4078-1A3 but fitted with 1350-1410nm CWDM optical transmitters
IQOTR4379-1A3 As IQOTR4079-1A3 but fitted with 1350-1410nm CWDM optical transmitters
IQOTR4380-2A3 As IQOTR4080-2A3 but fitted with 1350-1410nm CWDM optical transmitters
IQOTR4478-1A3 As IQOTR4078-1A3 but fitted with 1470-1530nm CWDM optical transmitters
IQOTR4479-1A3 As IQOTR4079-1A3 but fitted with 1470-1530nm CWDM optical transmitters
IQOTR4480-2A3 As IQOTR4080-2A3 but fitted with 1470-1530nm CWDM optical transmitters
IQOTR4578-1A3 As IQOTR4078-1A3 but fitted with 1550-1610nm CWDM optical transmitters
IQOTR4579-1A3 As IQOTR4079-1A3 but fitted with 1550-1610nm CWDM optical transmitters
IQOTR4580-2A3 As IQOTR4080-2A3 but fitted with 1550-1610nm CWDM optical transmitters
Note: All these versions are also available for the new IQ 3U B enclosure. Please append order
code with A3 (A enclosure) or B3 (B enclosure) as appropriate.
Issue 1 Rev 2 © 2012 Snell Limited
Page 4
IQOTR40/41/42/43/44/45/99 www.snellgroup.com
Feature Summary
•4 channels of fiber outputs single mode fiber optic transmitter for 3G/HD/SDSDI
and DVB ASI signals.
•4 channels of electrical SDI inputs for 3G/HD/SDSDI and DVB ASI signals.
•4 channels single mode fiber optic receiver for 3G/HD/SDSDI and DVB ASI
signals.
•4 channels of electrical SDI outputs for 3G/HD/SDSDI and DVB ASI signals.
•Output wavelengths of 1310 nm, 1550 nm or CWDM combinations.
•Input wavelengths of 1260 nm to 1610 nm.
•Reclocking for 3 Gbps, 1.5 Gbps HD-SDI and 270 Mbps SDI signals, or
asynchronous operation for other frequencies.
•Input channel routing – electrical SDI inputs 1 to 4 can be routed to fiber output
channels 1 to 4, and fiber inputs 1 to 4 can be routed to electrical SDI output
channels 1 to 4.
•Input selection logic – two configurations can be preset with routing.
Configurations can be selected on input signal status.
•RollCall monitoring allows all signal paths to be managed
•High density DIN1.0/2.3 and HDBNC options provide compact space saving
single slot solution.
•The SFP receivers and transmitters are hot-pluggable – i.e. they may be
removed and inserted without removing power from the module.
Issue 1 Rev 2 © 2012 Snell Limited
Page 5
IQOTR40/41/42/43/44/45/99 www.snellgroup.com
Technical Profile
Inputs and Outputs
Signal Inputs (Tx)
Electrical 3 Gbps HD-SDI, 1.485 Gbps HD-SDI or 270 Mbps SD-SDI (asynchronous
operation available at other frequencies)
Connector / format BNC / 75 Ohm, DIN1.0/2.3, HDBNC panel jack
Conforms to SMPTE 424M (HD level A)
SMPTE 292M (HD)
SMPTE 259M-C (SD)
Inputs 4
Input cable length Up to 100m Belden 1694A @ 3Gbps
Up to 150m Belden 1694A @ 1.5 Gbps
Up to 250m Belden 1694A @ 270 Mbps
Signal Inputs (Rx)
Optical 3 Gbps HD-SDI, 1.485 Gbps HD-SDI or 270 Mbps SD-SDI (asynchronous
operation available at other frequencies)
Connector / format LC single mode SFP
Conforms to: SMPTE 297-2006
Inputs 4
Signal Outputs (Tx)
Optical 3 Gbps HD-SDI, 1.485 Gbps HD-SDI or 270 Mbps SD-SDI (asynchronous
operation available at other frequencies)
Connector / format LC single mode SFP
Conforms to SMPTE 297-2006
Outputs 1 to 4 per Channel
Signal Outputs (Rx)
Electrical 3 Gbps HD-SDI, 1.485 Gbps HD-SDI or 270 Mbps SD-SDI (asynchronous
operation available at other frequencies)
Connector / format BNC / 75 ohm, DIN1.0/2.3, HDBNC panel jack
Conforms to SMPTE 424M (HD level A)
SMPTE 292M (HD)
SMPTE 259M-C (SD)
Outputs 1 to 4 per Channel
Controls
Indicators
Power OK (Green)
CPU OK (Green flashing)
Good Hardware OK (Green)
Warning SFP fit not as sold (Yellow), SFP warning active (Yellow flashing), OK (Off)
Error Hardware error (Red), SFP alarm active (Red flashing), OK (Off)
Input 1-8 SD-OK (Yellow), HD-OK (Green), 3G-OK (Blue), other-OK (White flashing),
Bypass (Rate colour flashing), Loss (Red)
Issue 1 Rev 2 © 2012 Snell Limited
Page 6
IQOTR40/41/42/43/44/45/99 www.snellgroup.com
RollCall Functions
Input 1-8 rate select 3G, HD, SD, other
Reclock bypass On/Off
Fiber O/P select SDI Input 1-4
Electrical O/P select Fiber Input 5-8
Input status Present, Loss, Unknown, Unrouted, Data Rate
Output Mute On/Off
Laser disable On/Off
Logging Input 1-8 Type
Input 1-8 Bit Rate
Input 1-8 Present
Input 1-8 Loss
Output 1-4 laser bias
Output 1-4 laser power
Output 1-4 laser wavelength
Input 5-8 laser power
Output Configuration
RollTrack controls On/Off, Index, Source, Address, Command, Status, Sending
RollTrack outputs Unused
Input 1-8 Present
Input 1-8 Rate Unknown
Input 1-8 Loss
Input 1-8 3G
Input 1-8 HD
Input 1-8 SD
Output 1-4 laser bias OK
Output 1-4 laser bias High
Output 1-4 laser bias Low
Input 5-8 Power OK
Input 5-8 Power High
Input 5-8 Power Low
Output Configuration
Specifications
Electrical 3 Gbps SDI, SMPTE 424M,
1.5 Gbps HD-SDI, SMPTE 292M
270 Mbps SDI, SMPTE 259MC / DVB-ASI
Connector / format BNC/ 75 Ohm panel jack on standard Snell connector panel
Return loss >-15 dB (270 Mbps, 1.5 Gbps)
>-10 dB (3 Gbps)
Output jitter SD-SDI 0.2 UI (10 Hz) / 0.2 UI (1 kHz)
3G/HD-SDI 1.0 UI (10 Hz) / 0.2UI (100 kHz)
Module power 10.5 W max
Receiver wavelength 1260 – 1610 nm
Optical power 0 dBm to -18 dBm
Input range
Issue 1 Rev 2 © 2012 Snell Limited
Page 7
IQOTR40/41/42/43/44/45/99 www.snellgroup.com
(Depends on SFP fitted)
1310 nm Tx
Wavelength 1310 nm
Spectral width (FWHM) 1.5 nm (typ RMS)
Output power -2 dBm (typ), 0 dBm max
Extinction ratio >7.5:1 (typ)
Transmission distance 10 km max under worst conditions, up to 30 km max
1550 nm Tx
Wavelength 1550 nm
Spectral width (FWHM) 1 nm (max)
Output power 4 dBm max
Extinction ratio >7.5:1 (typ)
Transmission distance Up to 50 Km max
CWDM wavelength Tx
Wavelength 1270 nm – 1410 nm and 1470 nm –1610 nm
Spectral width (FWHM) 1 nm (max)
Output power 2.5 dBm (typ), 5 dBm max
Extinction ratio >9:1 (typ)
Transmission distance Up to 50 km max
Issue 1 Rev 2 © 2012 Snell Limited
Page 8
IQOTR40/41/42/43/44/45/99 www.snellgroup.com
Connections
SDI Inputs IQOTR4_78-1A3 and IQOTX8_79-1A3
SDI inputs to the unit are made via 8 DIN 1.0/2/3 or HD BNC (75ohm) panel jack
connectors.
IQOTR4_80-2A3
SDI inputs to the unit are made via BNC / 75ohm panel jack connectors.
Fiber Inputs IQOTR4_78-1A3 and IQOTX8_79-1A3
Fiber inputs from the unit are made via 4 LC connectors.
IQOTR4_80-2A3
Fiber inputs from the unit are made via 4 LC connectors.
Issue 1 Rev 2 © 2012 Snell Limited
Page 9
IQOTR40/41/42/43/44/45/99 www.snellgroup.com
SDI Outputs
IQOTR4_78-1A3 and IQOTX8_79-1A3
SDI outputs to the unit are made via 8 DIN 1.0/2/3 or HD BNC (75ohm) panel jack
connectors.
IQOTR4_80-2A3
SDI outputs to the unit are made via BNC / 75ohm panel jack connectors.
Fiber Outputs
IQOTR4_78-1A3 and IQOTX8_79-1A3
Fiber outputs from the unit are made via 4 LC connectors.
IQOTR4_80-2A3
Fiber outputs from the unit are made via 4 LC connectors.
Issue 1 Rev 2 © 2012 Snell Limited
Page 10
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Transceptor de Snell
