SnapAV Luma 500 series Manual de usuario
700 Series Dome
500 Series Dome
IP-Enabled HD Surveillance Camera
Installation
Manual
®
Important!
Ensure your NVR
has the latest
firmware!
2
Luma 500/700 Series Dome IP Camera
Read this before you go on site!
For maximum control and convenience, install your camera with a
connection to the Internet via your NVR or through a local network
router. This allows you to use OvrC, a powerful remote maintenance
tool. See OvrC.com for details. In addition, your client can use the
Luma Surveillance mobile app to check on the camera from anywhere.
For installation using this guide, you must be able to access this
camera through a personal computer. If your surveillance system
is not on a network, you’ll have to use the NVR’s local interface for
installation. See the NVR user’s manual for details.
3
Luma 500/700 Series Dome IP Camera
Required Equipment
}A network connection (and an NVR, if desired)
}Admin rights to a computer that can access the network
}Mobile device with Luma Surveillance mobile app (recommended)
or CCTV tester
}Power source: PoE or 12V DC
}Phillips screwdriver
Box Contents
}Camera
}Self-adhesive mounting template
}4 x wall anchors with screws
}3mm hex wrench
}CC tester cable
}Weatherproofing kit for PoE cable
®
Important!
Before attaching this to
your Luma NVR, update
the recorder to the latest
firmware! If you don’t,
essential features of your
camera may not function.
4
Luma 500/700 Series Dome IP Camera
Additional Resources
If desired, you can add an SD card (up to 128 GB) to the camera. If you
are not using an NVR, then an SD card or a network drive is required
if you want to keep a log of the camera’s activities.
You can acquire a PDF of the web interface manual and other materials
from the product page at SnapAV.com.
Dome Tether
We recommend you do not remove the security tether that holds the
dome cover to the camera base. However if you must get rid of it,
please cut it at both ends. Do not unscrew the screws on the dome or
the dome cover, or you may damage the camera’s weatherproofing.
5
Luma 500/700 Series Dome IP Camera
Safety Tips
}Handle this device with care.
}Do not strike or shake this device.
}Protect the power cord from being stepped on or pinched,
particularly where it connects to the device and the power outlet.
}Do not operate this device beyond its specified power ratings.
}Do not use this device near any heat sources such as radiators,
heat registers, stoves, or other such heat-generating equipment.
}Tempterature affects the performance and lifespan of the camera
and SD card. For best results, use this device in temperatures
ranging from -20–140 °F (500 series) or -40–140 °F (700 series).
}Clean this device with a dry cloth. Do not use strong or abrasive
detergents when cleaning the device, especially the lens. If dirt is
hard to remove, use a mild detergent and wipe gently.
}Make a note of the configuration settings and save them. This helps
when changing the configuration, when upgrading the device, or
with recovery if unexpected failure or trouble occurs.
6
Luma 500/700 Series Dome IP Camera
Precautions
Before you start, ensure that the device is in good condition and all
the assembly parts are included. Also ensure that your recorder has
the very latest firmware. Use OvrC to update the firmware, or consult
your NVR manual.
}Ensure the mounting surface is strong enough to hold three times
the weight of the camera and the mount.
}If the mounting surface is cement, use the included expansion
screws to install the camera. If mounting to a wood surface, use
self-tapping wood screws (not included) to secure the camera.
}If the product does not function properly, please contact technical
support. Do not disassemble the camera for repair or maintenance.
}CAUTION: Do not throw away the foam ring around the camera
lens! It protects the camera from glare from its infrared lights.
7
Luma 500/700 Series Dome IP Camera
Your Camera
Before installing, familiarize yourself with the parts of your camera.
Dome
Dome
Tether
Cable
Conduit
Liner
Camera
Body
Foam
Ring
Mounting
Base
8
Luma 500/700 Series Dome IP Camera
Installation with an NVR
If you are installing with an NVR, follow these instructions. Otherwise,
follow the instructions starting on the next page.
1. Ensure your NVR has the latest firmware. If it does not, your NVR
may be unable to locate and activate your camera.
1. Perform the physical installation of your camera by following the
instructions given on pages 13–15.
2. Plug your camera into your recorder. The NVR autodetects your
camera, activates it (giving it the same admin password that it has),
and assigns it an IP address.
3. Complete the installation using the instructions given in your
NVR manual. You do not need to continue using this guide. Where
possible, we recommend changing settings using your NVR.
4. Optional: This camera has a few features that are not available
on your NVR: line crossing and area intrusion. After completing
installation, see the camera’s web interface manual to set these up.
9
Luma 500/700 Series Dome IP Camera
Install and Run the Luma Utility
Use the Luma Utility to locate your camera and set it up.
Visit your product page at SnapAV.com and download the
Luma Utility installer from the Support tab. You must use
v3.0.0.53 build 20170426 or later! Earlier versions of the
utility will not work!
Run the installer. You can click through and accept the defaults.
Pre-Installation Camera Configuration
You’ll find it easiest to connect the camera directly to your PC, making
most adjustments to the camera from the convenience of your table
(prior to physical installation), rather than from atop a ladder.
Connect the camera to your PC and run the Luma Utility.
It searches for attached Luma Surveillance devices. If your
camera does not appear, check the connection, ensure the
camera is powered up, then click the Refresh button.
10
Luma 500/700 Series Dome IP Camera
Activate the Camera
Click on the entry for your camera to view its details. If the camera
is inactive, use the text boxes at the lower right of the Luma utility
window to activate the camera by creating a new secure password.
}Passwords cannot be longer than 16 characters. To ensure
compatibility with the local interface, only use numbers, letters,
spaces, and the following special characters: . , : - /
}Use a password that is long and easy to remember. A password
like parisinthespring is more secure and easier to remember than
a password like D3x-7b.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
