SMK-Link VP4750 Manual de usuario
VP4750 User’s Guide
Bluetooth Touchpad Remote
for presentations and desktop control
Table of Contents
Getting Started .......................................................................2
Buttons and Controls ..............................................................3
Windows
Pairing for Windows ................................................5
Using the remote in Windows .................................8
Mac
Pairing on the Mac ..................................................9
Using the remote in OS X .....................................11
Advanced Topics ..................................................................12
Agency Certications ............................................................13
Product Specications ..........................................................15
System Requirements ..........................................................15
Trouble Shooting ..................................................................16
Technical Support ..................................................Back Cover
Page 1
Getting Started
Thank you for purchasing the VP4750 Bluetooth Touchpad
remote by SMK-Link. It’s the perfect tool for giving better pre-
sentations or controlling your computer from across the room.
The VP4750 uses Bluetooth to provide up to 33 feet of range
and a touchpad for the most accurate mouse pointing. Before
you begin, your computer should already have Bluetooth
installed (either internally as on a Mac or high-end laptop or
externally with a Bluetooth dongle).
Install Batteries
Remove the battery door from the remote and
install two AAA batteries following the
diagram on the remote.
Page 2
Buttons and controls
Activity LEDBluetooth LED
Next Slide /
Right Arrow
Prev Slide /
Left Arrow
Power SwitchConnect Button
Scroll Strip
Touchpad
Right Mouse Button
Blank Screen
(Presentation)
Left Mouse Button
Page 3
Activity LED
Next Slide /
Right Arrow
Power Switch
Scroll Strip
Bluetooth LED: Shows the status of the Bluetooth connection.
Fast Blinking: In Connect Mode. Off: Not connected
Slow Blinking: Connected.
Activity LED: As you press controls this LED should blink.
Next Slide / Right Arrow: Pressing this button is the same as
pressing the right arrow key on your keyboard. In presentation
software it advances to the next slide.
Prev Slide / Left Arrow: Pressing this button is the same as
pressing the left arrow key on your keyboard. In presentation
software it returns to the previous slide.
Power Switch: Slide this switch to turn the remote On. To turn
Off, slide this switch and hold for 5 seconds.
Connect Button: Press to place remote in connect / discovery mode.
Blank Screen: By default this button sends the “b” key. In
presentation software this blanks the screen.
Touchpad: Move the cursor by sliding your thumb over the
touchpad. Scroll through documents and web pages with the
Scroll Strip. The patented click-trigger on the bottom is the left
mouse button. Right click with the upper button.
Page 4
Pairing for Windows
The rst time you use any Bluetooth device, you must pair it
with your computer. Depending on the drivers and version of
Windows you have, your screens may appear slightly different
but the steps are generally the same. Should you have prob-
lems pairing, please contact Customer Support for assistance.
Step 1: Open Bluetooth Settings
Open the Bluetooth Control panel either by double clicking on
the Bluetooth icon in the system tray
or by selecting Start | Control Panel and double clicking on the
Bluetooth icon.
Step 2: Add New Device
Click on Add or New Connection to start the process of pair-
ing the VP4750 to your computer.
PC
Page 5
Step 3: Put VP4750 in to Connect Mode
Turn the remote On by sliding the power switch on the right
side of the remote. Put the remote into connect mode by
pressing the Connect button on the left side of the remote. The
blue LED should immediately begin blinking rapidly.
Step 4: Follow Add New Device Dialog Boxes
Your driver may have a checkbox for “My device is set up and
ready to be found”. If so, check that box and click next. Other
drivers skip this step and just have you click next to begin
searching for devices. This should bring up a list of Bluetooth
devices set into connect mode including nearby computers and
mobile phones.
PC
or
Page 6
Step 5: Final Details
Select the VP4750 from the list of recognized items and click
next. For drivers which need a device type, select Mouse. If
asked for a passkey, select “Do not use passkey” or “Empty
passkey.” Follow the
dialog boxes until
done. You should
now be able to move
the cursor by sliding
your thumb over the
touchpad.
PC
Page 7
PC
Using the remote in Windows
Presentation Software
Give professional presentations with PowerPoint and the
VP4750. Control your slideshows from up to 33 feet away.
Use the touchpad as a mouse to load and start your presenta-
tions. The Next Slide (>), Previous Slide (<) and Blank buttons
will help your presentations look more professional.
Hint: Use the cursor as a virtual laser pointer. A laser pointer
doesn’t show up on a web conference and is hard to see on
plasma displays. Use the cursor to point out important details
that would otherwise be impossible for your audience to see.
Windows Desktop
Use the VP4750 as a mouse to control the windows desktop
from further away. Now you can use your laptop like a home
theatre system to play DVDs or to stream TV shows. Use
it with your desktop to select and play music. Any program
which can be controlled by a mouse, can be controlled with the
VP4750.
Page 8
Pairing on the Mac
The rst time you use any Bluetooth device, you must pair
it with your computer. Pairing is very simple on the Mac,
however, should you have problems, please contact customer
support for assistance.
Step 1: Bring up System Preferences
Bring up System preference either by clicking on it
in the dock or by nding the icon in the applications
folder.
Step 2: Open the Bluetooth Preference Pane
Click on the Bluetooth icon in System Preferences
to begin the process of pairing your VP4750 to your
Mac.
Step 3: Put VP4750 in to Connect Mode
Turn the remote On by sliding the power switch on the right
side of the remote. Put the remote into connect mode by
pressing the Connect button on the left side of the remote. The
blue LED should immediately begin blinking rapidly.
Mac
Page 9
Tabla de contenidos
Otros manuales de Mando a distancia de SMK-Link
SMK-Link
SMK-Link VP6620 Manual de usuario
SMK-Link
SMK-Link VP4150 Manual de usuario
SMK-Link
SMK-Link X-Link VP3701 Manual de usuario
SMK-Link
SMK-Link VP3700 Blu-Link Manual de usuario
SMK-Link
SMK-Link X-Link VP3701 Manual de usuario
SMK-Link
SMK-Link VP3720 Manual de usuario
SMK-Link
SMK-Link VP4590 Manual de usuario
SMK-Link
SMK-Link Global Presenter VP4350 Manual de usuario
SMK-Link
SMK-Link Presentation Pilot Pro VP6450 Manual de usuario
SMK-Link
SMK-Link VP3720 Manual de usuario
