Smith & Noble Board Manual de usuario
Wall Mount
Step by Step Installation Instructions
Board Mounted
Cornice/Valance
12
smithandnoble.com
800.248.8888
Table of Contents
Step 1 - Getting Started (Parts & Tools) ................3
Overview - ...........................................4
Step 2 - Attaching the Brackets ......................5
Step 3 - Mounting the Cornice/Valance ...............6
Optional - Care & Cleaning ............................6
Warranty ..................................Back Cover
A Smooth Set-Up
We want you to love your new Cornice/Valance and that
includes having a smooth installation experience. If you
encounter any difculties or questions, please reach out to us
for help. It’s why we’re here. Call us at 800.248.8888 for more
info on installation.
We recommend you hold on to all packaging until your
hardware is fully installed. Should something go wrong (we
strongly doubt it), we want any potential returns to be a
painless as possible.
Customer Service Hours
Monday — Friday: 6am — 6pm PT
Saturday — Sunday: 7am — 4pm PT
smithandnoble.com
Everything
You Need
34
smithandnoble.com
800.248.8888
MOUNTING
BRACKET
MOUNTING
BRACKET
MOUNTING
BRACKET
MOUNTING
BRACKET
Getting Started
PENCIL & SCREWDRIVER (NOT INCLUDED) POWER DRILL & LEVEL (NOT INCLUDED)
SCREWS
STEP 1 — PARTS & TOOLS
WALLBOARD OR PLASTER: Hollow wall applications: Use a secure fastener designed
specically for this purpose.
METAL: Prepare by pre-drilling holes and then using the included screws.
CONCRETE, STONE, BRICK OR TILE: Use a masonry drill and surface-specic plugs, anchors, or
screws.When selecting a fastener be sure it’s designed to support the weight of the product being
installed (if you’re not sure, either give us a call or ask a professional at your local hardware store).
Once obtained, follow the fastener manufacturer’s instructions regarding proper installation.
TOOLS YOU WILL NEED TO INSTALL YOUR HARDWARE: Pencil, screwdriver, ¼" nut driver,
level, and a drill with a 7⁄64" drill bit.
Note: It’s important to monitor the amount of pressure you apply when using a drill. If the screws
are too tight this may cause the screw itself to break off in the wall or window frame.
MOLLY
BOLT
SELF DRILLING
ANCHOR
TOGGLE
BOLT
Before you begin, check the accompanying diagram to make sure you have all the parts you need.
You’ll need to make sure the surface you intend to install your hardware is sturdy enough to
accommodate the brackets. If you’re screwing
directly into a surface this means locating wood
studs that are strong enough to securely bond
with the included screws. Otherwise, you’ll
need to use a secure fastener (as illustrated) but
please note this piece is not included.
MOUNTING BRACKETS
Fabric Cornice/Valance
Cornice depth over 3"
OVERVIEW
DEPTH > 3" DEPTH < 3"
Fabric Cornice
Cornice depth 3" and under
56
smithandnoble.com
800.248.8888
STEP 2 — ATTACHING YOUR BRACKETS
Attaching the Brackets
Center the cornice/valance over the
window opening. Mark the position
of the ends of the cornice/valance on
the wall. Attach the mounting brackets
to the wall 3" in from the marks at the
desired height with screws provided.
Make sure the mounting brackets are
level with one another.
STEP 3 — MOUNTING THE CORNICE/VALANCE
CARE & CLEANING
Mounting the Cornice/Valance
Set the cornice/valance on top of the
brackets. Center over the window
and push back against the wall.
Attach the cornice/valance with the
short screw provided.
Care & Cleaning
Minimal care and cleaning is needed to maintain the beauty of your cornice.
Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all
that is required to keep your cornice looking fresh and neat.
3"
Attaching the Brackets
(Short Bracket)
Turn the cornice/valance over onto its
top and lay it on a at surface. Attach
the mounting brackets 5" in from each
end and ush with the back of the
dustcover top. If additional brackets are
required, space them equally between
the two existing brackets. Attach with
the short screws provided.
Mounting the Cornice/Valance
(with Short Bracket)
Position the cornice/valance on the wall
at the desired height. Using a pencil,
mark the center of each bracket slot.
Install one of the mounting screws at
one of the marked locations. Install the
additional mounting screws making
sure they are aligned with the rst.
Leave the screws projecting from the
wall approximately 1/8". Slide the
cornice/valance brackets down onto
the screws.
Parts & Tools
FABRIC CORNICES
Cameron Cornice
© 2020 Smith & Noble Home, Inc. All Rights Reserved SN112020
Warranty Service
The enjoyment of your Cornice should be everlasting, which is why our
products come with a limited lifetime warranty. The warranty applies to
the original owner, requires a proof of purchase (hang on to your receipt!)
and covers defects in material or craftsmanship. Hardware must have been
properly installed. We reserve the right to determine if your hardware
warrants a repair or a replacement. In need of warranty service? Call us at
800.248.8888 and we’ll arrange for a repair or replacement ASAP.
Tabla de contenidos
Otros manuales de Persiana de ventana de Smith & Noble
Smith & Noble
Smith & Noble Motivia Motorization Manual de usuario
Smith & Noble
Smith & Noble Sheer Elegance Manual de usuario
Smith & Noble
Smith & Noble Rod Manual de usuario
Smith & Noble
Smith & Noble Rod Manual de usuario
Smith & Noble
Smith & Noble Metal Blinds Manual de usuario
Smith & Noble
Smith & Noble Faux Wood Blinds Manual de usuario
Smith & Noble
Smith & Noble Metal Blinds Manual de usuario
Smith & Noble
Smith & Noble Cellular Shades Manual de usuario
Smith & Noble
Smith & Noble Skylight Manual de usuario
Manuales populares de Persiana de ventana de otras marcas
Domondo
Domondo PureNight Manual de instrucciones de instalación
rollease acmeda
rollease acmeda Easy Spring Air Guía de configuración
IKEA
IKEA KADRILJ Manual de usuario
Hallis Hudson
Hallis Hudson Rolls Super glide Manual de usuario
Benthin
Benthin P1614 Manual de usuario
MV LINE
MV LINE CLARA 015 Manual de instrucciones
