SMH Technologies FlashRunner Quattro Series Manual de usuario

FlashRunner

Quattro Series

High-Performance,

Standalone Gang In-System

Programmers

User’s Manual

Revision 1.0 — November 2009

DC10135

We want your feedback!

SMH Technologies is always on the lookout for new ways to improve its

Products and Services. For this reason feedback, comments,

suggestions or criticisms, however small, are always welcome.

Our policy at SMH Technologies is to comply with all applicable worldwide safety and EMC/EMI

regulations. Our products are certified to comply with the European New Approach Directives and the

CE mark is applied on all our products.

This product as shipped from the factory has been verified to meet with requirements FCC as a CLASS

A product.

In a domestic environment, this product may cause radio interference in which case the user may be

required to take adequate prevention measures.

Attaching additional wiring to this product or modifying the product operation from the factory default as

shipped may effect its performance and cause interference with other apparatus in the immediate

vicinity. If such interference is detected, suitable mitigating measures should be taken.

SMH Technologies

E-mail (general information): info@smh-tech.com

E-mail (technical support): support@smh-tech.com

Web: http://www.smh-tech.com

Important

SMH Technologies reserves the right to make improvements to FlashRunner, its documentation and software routines, without

notice. Information in this manual is intended to be accurate and reliable. However, SMH Technologies assumes no

responsibility for its use; nor for any infringements of rights of third parties which may result from its use.

SMH TECHNOLOGIES WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF

PRODUCTS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY THEREOF.

Trademarks

SMH Technologies is the licensee of the SofTec Microsystems trademark.

All other product or service names are the property of their respective owners.

FlashRunner Quattro User's Manual

Contents

0Before Starting 9

0.1 Important Notice to Users 9

0.2 Safety 9

0.3 Getting Technical Support 10

0.4 Additional Documentation 10

1Overview 11

1.1 What is FlashRunner Quattro? 11

1.1.1 General features 12

1.1.2 Hardware features 13

1.1.3 Software features 13

1.2 Package Checklist 14

1.3 Hardware Overview 14

1.3.1 Power Supply 14

1.3.2 LAN Connector 14

1.3.3 LAN Reset Push-Button 14

1.3.4 RS-232 Connector 15

1.3.5 Control Connector 15

1.3.6 ISP Connectors 15

1.4 Programming Algorithms and Licenses 15

1.4.1 Installing New Licenses 15

1.5 Upgrading the Firmware 16

2System Setup 17

2.1 Overview 17

2.2 Software Setup 17

2.3 Hardware Setup 18

2.3.1 Interfacing FlashRunner with your Test/Programming

Equipment 18

2.3.2 Connecting FlashRunner to the Host PC System 19

Contents

2.3.3 Powering Up FlashRunner 19

2.3.4 Setting Up LAN Settings 19

2.4 Step-by-Step Tutorial: Sending Commands to FlashRunner 19

3Connectors 27

3.1 Overview 27

3.2 ISP Connectors 27

3.3 Control Connector 33

3.4 RS-232 Connector 35

4Technical Specifications 37

4.1 Absolute Maximum Ratings 37

4.2 DC Characteristics and Functional Operating Range 37

4.3 AC Characteristics 39

4.4 Multiplexing Characteristics 40

4.5 Physical and Environmental Specifications 41

FlashRunner Quattro User's Manual

Index of Figures

Figure 1.1: FlashRunner Quattro 11

Figure 2.1: FlashRunner Control Panel, Communication Settings 21

Figure 2.2: FlashRunner Control Panel, Target Device Configured 22

Figure 2.3: FlashRunner Control Panel, Binary File Conversion 23

Figure 2.4: FlashRunner Control Panel, File Transfer 24

Figure 2.5: FlashRunner Control Panel, Target Device Programmed 25

Figure 3.1: ISP GROUP Connectors 28

Figure 3.2: Control Connector 33

Figure 3.3: RS-232 Connector 35

Figure 4.1: Load Conditions 40

FlashRunner Quattro User's Manual

Index of Tables

Table 3.1: ISP GROUP A Connector Signals 28

Table 3.2: ISP GROUP B Connector Signals 30

Table 3.3: Control Connector Signals 33

Table 3.4: RS-232 Connector Signals 35

Table 4.1: Absolute Maximum Ratings 37

Table 4.2: DC Characteristics and Functional Operating Range 37

Table 4.3: AC Characteristics 39

Table 4.4: Multiplexing Characteristics (FR04A08) 40

Table 4.5: Multiplexing Characteristics FR04A16) 40

Table 4.5: Physical and Environmental Specifications 41

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de SMH Technologies

SMH Technologies

SMH Technologies FlashRunner FR03 Manual de usuario

SMH Technologies

SMH Technologies Flashrunner FR01LAN Manual de usuario

SMH Technologies

SMH Technologies FlashRunner Cube Series Manual de usuario

SMH Technologies

SMH Technologies FlashRunner FR01AT0 Manual de usuario

SMH Technologies

SMH Technologies FlashRunner FR01ENG Manual de usuario

SMH Technologies

SMH Technologies Flashrunner FR3070A Manual de usuario

SMH Technologies

SMH Technologies FlashRunner LAN 2.0 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario