Smeg DWAUP364X Manual de usuario

INSTRUCTION MANUAL

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS

Contents

Description of the controls ________________________________2

Operating instructions___________________________________ 14

Cleaning and maintenance_______________________________29

Troubleshooting _______________________________________ 33

Thank you for choosing one of our products.

You are advised to read this manual carefully; it contains all the

information you need about the right conditions for the proper, safe use

of your dishwasher.

The individual sections are laid out to provide you with a step-by-step

guide to all your appliance's functions; the texts are easy to understand

and are complete with detailed illustrations.

Recommendations are given for the correct use of the baskets, spray

arms, containers, filters, washing programs, and for operating the

controls.

Following the cleaning instructions provided here will keep your

dishwasher's performance at peak levels in the long term.

This user-friendly manual will provide answers to all your questions

about use of the dishwasher.

USER INSTRUCTIONS: these consist of recommendations for using the

appliance, a description of its controls and of the correct cleaning and

maintenance procedures.

User instructions

1. Description of the controls

1.1 Front panel

All the dishwasher controls are grouped on the front panel. Programming

and option selection are only possible with the door closed.

1 ON/OFF BUTTON

2 SELECTION PROGRAM BUTTONS (P1…P5)

3 OPTION SELECTION BUTTON

4 CONFIRM OPTIONS BUTTON

5 DELAY PROGRAM BUTTON

6 START/PAUSE BUTTON

7 POWER ON LIGHT

8 PROGRAMS INDICATOR LIGHTS

9 INFORMATION DISPLAY

10 RECESSED DOOR HANDLE

N.B.: symbols and styling are guideline and may vary depending on

the model or version of the dishwasher purchased.

User instructions

1.2 Information display

The dishwasher is equipped with a practical DISPLAY which provides

information on the programmed dishwasher functions.

A 4-FIGURE DISPLAY

B RINSE AID WARNING LIGHT

C SALT WARNING LIGHT

D START/PAUSE BUTTON

E OPTIONS LIGHT

PROGRAMS TABLE

The manual contains the programs table for several models. To find the

table for your dishwasher, compare the program symbols at the top of the

table with those on your control panel.

User instructions

PROGRAMS TABLE

PROGRAMME,

NUMBER &

SYMBOL

LOAD CROCKERY AND

CUTLERY

PROGRAM PROGRESS

DETERGENT

COM

PART

MEN

G/H

COM

PART

MEN

SOAK

Pans and dishes awaiting

completion of the load. Cold prewash

--- 20g

NORMAL

ECO (*)

Glass, china and mixed

dishes with light dirt.

Cold prewash

Wash at 49°C

Rinse at 40°C

Dry

5g 20g

ECO

Dishes with normal dirt,

even with dried-on

residues.

Wash at 50°C

Cold rinse

Rinse at 70°C

Dry

10g 25g

AUTO

60-70

Pans and dishes with

normal dirt, even with

dried-on residues.

When the "

AUTO

" program is selected, the

dishwasher recognises the type of dirt and

automatically adjusts the washing

parameters as appropriate. 10g 25g

ULTRA CLEAN

Very dirty pans and

dishes, even with dried-on

residues.

Hot prewash

Wash at 70°C

2 cold rinses

Rinse at 70°C

Dry

10g 25g

The

ULTRA CLEAN

program terminate with an extra anti-bacteria rinse that ensures

a further reduction in the bacteria level. If the temperature falls during this stage of

the program (e.g. because the door is opened or due to a power blackout), the

program lights flash to warn that the anti-bacteria effect is not guaranteed.

If the dishwasher door is open or not properly closed, the washing cycle

will not start.

(*) Reference program as per

AS/NZS 2007

Single-phase power supply, power setting P1.

NORMAL

ECO (*)

Duration for power

2.0 kW

CONSUMPTION

Water

Litres Electricity (KWh)

139’ 11,7 0,646

User instructions

PROFESSIONAL PROGRAMS

(see “professional programs option”)

PROGRAMME

NUMBER E

SYMBOL

LOAD CROCKERY AND

CUTLERY

PROGRAM

PROGRESS

DETERGENT

COM

PART

MEN

G/H

COM

PART

MEN

G/H

PRO GLASSES

Special program for washing

glasses.

Wash at 50°C

Cold rinse

Rinse at 70°C

--- 30g

ULTRA RAPID

Very dirty pans and dishes, even

with dried-on residues, for fast

washing.

Wash at 65°C

Cold rinse

Rinse at 65°C

--- 30g

UNIVERSAL

Dishes with normal dirt, with some

fairly moist residues.

Wash at 65°C

Cold rinse

Rinse at 70°C

--- 30g

INTENSIVE

Very dirty pans and dishes, even

with dried-on residues, for fast

washing.

Hot prewash

Wash at 72°C

2 cold rinses

Rinse at 70°C

10g 25g

If the dishwasher door is open or not properly closed, the washing cycle

will not start.

Only run the soak program with half loads. Options cannot be used with the soak program.

The HALF LOAD option cannot be used with the soak program or the professional

programs.

The ENERSAVE option (if featured) cannot be used with soak, ultra clean, or any

programs which do not include the final drying stage.

The cycle duration and power consumption may vary according to the water and room

temperatures, and the type and amount of dishes.

User instructions

DURATION AND CONSUMPTION

PROGRAMME

NUMBER E

SYMBOL

Duration for power

5.45 kW – P3 Duration for power

3.5 kW – P2

CONSUMPTION

Water (2) Electricity

(KWh)

Hot H

60°C Cold H

15°C Hot H

60°C Cold H

15°C Litres Hot H

Cold

SOAK

15’ 15’ 15’ 15’ 4,0 0,02 0,02

NORMAL ECO

120’ 128’ 124’ 134’ 11,7

0,48 0,72

ECO

114’ 119’ 116’ 124’ 10,5

0,72 1,17

AUTO 60

78’ 82’ 82’ 88’ 10,5

0,87 1,31

ULTRA CLEAN

115’ 120’ 119’ 128’ 17,3

0,93 1,69

PRO GLASSES

19’ 24’ 24’ 31’ 12 0,59 1,22

ULTRA RAPID

16’ 20’ 19’ 25’ 12 0,68 1,46

UNIVERSAL

23’ 27’ 27’ 33’ 12 0,82 1,53

INTENSIVE

41’ 45’ 45’ 52’ 15,7

0,77 1,59

(2) Values are with the appliance power set on

User instructions

1.3 Washing programs

The dishwasher is equipped with a control panel and an

INFORMATION

DISPLAY from which it is possible to carry out all the power switch-on,

switch-off and programming operations.

Before starting a washing program make sure that:

•The water supply tap is open.

•The correct amount of detergent has been added to the

dispenser.

•The baskets have been correctly loaded.

•The spray arms are able to rotate freely and without

obstruction.

•The dishwasher door is securely closed.

LIGHTING

Pressing the ON/OFF button will start the dishwasher and will lit up the

dishwasher pilot light. After approximately 3 second from this operation

the DISPLAY will be turned on with a visualization that will depend upon

the state of the dishwasher.

PROGRAMMING

All the programming operations are possible only with closed door. With

open door, on the DISPLAY will appear - - : - -.

SELECTION PROGRAM

The program selection is possible

through the relative buttons.

By pressing the relative button of desired program (see table) it will lid up

the relative pilot light to confirm that the operation did occurred on the

DISPLAY will appear a program duration forecasting (“h.mm”).

User instructions

START PROGRAM

At this point, in order to start the machine, it is only enough to press the

START/PAUSE (6) for some seconds until the symbol START/PAUSE

(D) start to flash and confirmation “beep” is heard. From this moment the

cycle duration on the DISPLAY (9) starts to decrease.

This phase, that updates itself during the cycle, is “indicative” since it is

influenced by the washing conditions such as dishwasher type and

quantity, entry temperature etc. For this reason it is normal to see the

updating during a program (increment and decrease of minutes)

specially in the passage from one phase to the other (for example, from

washing to rinse).

END PROGRAM

The end of the program is indicated by a short signal acoustic and from

the “End” visual notification on DISPLAY. By pressing one of the

buttons, the “End” visual signal will vanish from the display and the

dishwasher is ready to continue a new cycle.

INTERRUPTING

PROGRAM

In order to interrupt a running program it is necessary:

•to press the START/PAUSE for some seconds until when the

symbol START/PAUSE remains lit on the display (confirmation

beep). At this point,it is possible to start the cycle again, otherwise:

•

TO CHANGE A PROGRAM

To change the running program it is necessary:

•to interrupt the running program (see “INTERRUPTING A PROGRAM”);

•select the new program;

•to press again the START/PAUSE button to make start the new

program.

Otros manuales para DWAUP364X

Tabla de contenidos

Otros manuales de Lavavajillas de Smeg

Manuales populares de Lavavajillas de otras marcas

Electrolux

Electrolux ESI5211LOX Manual de usuario

KitchenAid

KitchenAid KUDB230B Manual de usuario

Brandt

Brandt BDJ424DB Manual de usuario

Asko

Asko DSD767UXXL.AU Manual de usuario

Beko

Beko DFN26210W Manual de usuario

NEFF

NEFF S153ITX00E Hoja de especificaciones

Midea

Midea SV 4.45 wi Manual de usuario

LG LDF7932 Manual de usuario

Gorenje

Gorenje GV63214 Manual de usuario

Hotpoint

Hotpoint HDA1100ZWH Manual de servicio

Blomberg

Blomberg LDFN2240W Manual de usuario

AEG

AEG FFB83836PM Manual de usuario

Cylinda

Cylinda DM3220RFD Manual de usuario

Atag

Atag DW8214MB Manual de usuario

GE GLD8000 Series Manual de usuario

Siemens

Siemens SN23HI02KE Hoja de especificaciones

Omega

Omega ODW717X Manual de usuario

BORETTI

BORETTI BVW-683 Manual de usuario