SMC Networks DC3-DAKOTA Manual de usuario

Wingspan : 2150mm

Length : 1440mm

Weight : 2500gr - 3000gr

Radio : 4 channel / 4 servo standard

Motor : 2 motor brushless AXI 2826

Instruction Manual

KIT CONTENTS: We have organized the parts as they come out of the box for better identification

during assembly. We recommend that you regroup the parts in the same manner. This will ensure you

have all of parts required before you begin assembly

MAIN GEAR ASSEMBLY

. (2) Main gear

. (2) 65mm diameter wheels

. (4) Collar

. (6) Nylon plate

. (12)3mm x 12mm wood screw

TAIL GEAR ASSEMBLY

. (1) Tail gear

. (1) 35mm diameter wheel

. (4) Wheel collar

. (1) Steering arm

ELEVATOR CONTROL SYSTEM

. (2) Set aluminum control horn

. (2) 3mm x 40mm screw

. (2) Nylon horn

. (2) M2 metal clevis

. (2) Silicon tube

. (1) Nylon snap keeper

. (1) Metal domino

. (1) 1.7mm x 100mm metal pushrod

RUDDER CONTROL SYSTEM

. (1) Set aluminum control horn

. (1) 3mm x 45mm screw

. (1) Nylon horn

. (1) M2 metal clevis

. (1) Silicon tube

. (1) Nylon snap keeper

. (1) Metal domino

. (1) 1.7mm x 100mm metal pushrod

AILERON CONTROL SYSTEM

. (2) Set aluminum control horn

. (2) 3mm x 45mm screw

. (2) Nylon horn

. (2) M2 metal clevis

. (2) Silicon tube

. (2) Nylon snap keeper

. (2) 1.7mm x 180mm metal pushrod

MOTOR MOUNT ASSEMBLY

. (8) 3mm x 12mm metal screw

. (8) 6mm flat metal washer

MISCELLANEOUS ITEMS

. (1) 19mm x 700mm diameter aluminum dihedral

. (4) 6mm x 45mm nylon screw

. (4) 4mm x 30mm nylon screw

. (8) 2,6mm x 10mm wood screw

. (6) 2mm x 10mm wood screw

. (4) 1.7mm x 800mm metal pushrod

. (2) Wooden plate

. (2) Cowling

. (1) Decal

Instruction Manual DC3 - DAKOTA

1 2

3 4

5 6

7 8

Iron the covering if necessary. Glue the hinges by C.A glue.

Remove the covering.

Using the thread and the collar as a guide.

Tape the servo lead into the end of the thread. Pull the servo lead out.

Tape the servo lead in place. Secure the aileron servo.

1Installing the aileron servo

Instruction Manual DC3 - DAKOTA

910

11 12

13 14

15 16

Mark the holes from the control horn onto the bottom of

the aileron and INLINE with the servo arm.

Secure the control horn.

Secure the nylon control horn. Insert the clevis into the metal rod.

Insert the silicone tube into the clevis. Insert the clevis to the control horn.

Cut away the metal rod. Bend “L” the aileron pushrod.

Instruction Manual DC3 - DAKOTA

18 19

21 22

Attach the nylon snap keeper to the aileron servo arm. And

make the same way for the second aileron servo.

Make the center line onto the stabilizer. Remove the covering.

Slide the horizontal into the fuselage. Check the horizontal and the wing.

Mark the shape of the fuselage onto the top of the horizontal. And mark the shape of the fuselage onto the bottom of the

horizontal.

2Installing the horizontal and the vertical

Center line

A=A-1

A-1

AA1

Instruction Manual DC3 - DAKOTA

23 24

25 26

27 28

Remove the covering. Remove the covering.

Glue the horizontal to the fuselage using the epoxy glue. Glue the horizontal to the fuselage using the epoxy glue.

Glue the elevator hinge by C.A glue. Insert the rudder into the vertical stabilizer.

Glue the hinge by C.A glue.

Instruction Manual DC3 - DAKOTA

30 31

32 33

34 35

36 37

Drill a hole for the control horn. Install the control horn.

Secure the control horn. Secure the nylon control horn onto the elevator.

Make the same way for the second control horn. Remove the covering from the slot.

Attach the clevis to the elevator pushrod. Insert the silicone tube into the clevis.

3Installing the elevator pushrod

Instruction Manual DC3 - DAKOTA

38 39

41 42

43 44

Insert the elevator pushrod into the fuselage. Insert the clevis to the control horn.

Make the same way for the second elevator pushrod.

The tail gear. Bend “L” the rod.

Insert the rod to the nylon arm. Install the steering arm.

4Installing the tail gear and the rudder pushrod

Instruction Manual DC3 - DAKOTA

45 46

47 48

49 50

51 52

Install the wheel and the collar into the tail gear. Secure the tail gear.

Remove the covering. Secure the screw.

Drill a hole for the control horn. Install the control horn.

Secure the control horn. Install the nylon control horn.

Instruction Manual DC3 - DAKOTA

53 54

55 56

58 59

Insert the clevis into the metal rod. Insert the silicone tube into the clevis.

Remove the covering from the slot. Insert the rudder pushrod into the fuselage.

Attach the clevis to the control horn.

Install the elevator servo and secure it. Cut away the elevator pushrod.

5Installing the servo of the elevator and the rudder

Tabla de contenidos

Otros manuales de Juguete de SMC Networks

SMC Networks

SMC Networks Corsair-F4U Manual de usuario

Manuales populares de Juguete de otras marcas

marklin

marklin 37321 Manual de usuario

Canon

Canon PAPER CRAFT Manual de usuario

GREAT PLANES

GREAT PLANES Pitts M-12S Manual de usuario

NOCH

NOCH 14261 Manual de usuario

Hausler

Hausler 450 SE V2 Manual de usuario

Dynaflite

Dynaflite Daydream Manual de usuario

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manual

Kenner

Kenner Batman 63651 Manual de usuario

LEGO

LEGO 8527 Manual de usuario

iKarus

iKarus ECO 8 Manual de usuario

Multiplex

Multiplex EasyStar II Manual de instrucciones

Walkera

Walkera 38 Manual de instrucciones

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manual de usuario

MD MXION SWD Manual de usuario

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manual de usuario

marklin

marklin 39671 Manual de usuario

Meccano

Meccano 15103 Manual de usuario

LEGO

LEGO TECHNIC 8735 Manual de usuario