SMARTY 2.0 SW071 Manual de usuario
S
EN
ES
DE
ITA
FR
User Manual
Manual de usuario
Bedienungsaleitung
Manuale utente
Manuel de l'utilisateur
1-11
12-22
23-33
34-44
45-55
mod. SW071
Thanks for purchasing this product.
please make sure the battery is fully charged before using the
watch for the first time
Note: Waterproof performance - The device is not suitable for diving
or swimming in the sea;and not suitable for hot water baths, hot
springs, saunas, etc
APP Download
Scan the QR code to download and install the APP.
Note: Downloading the APP on iPad or Tablet is
not supported.
Compatible with iOS 9.0 & above and
Android 5.0 & above.
If the watch’s firmware or the APP is not the latest version, it may
affect the usage of the watch or the APP. Please update the watch’s
firmware and the APP to the latest version.
Firmware Upgrade: [CoolWear] → [Device] → [Firmware upgrade]
→ [upgrades].
APP Upgrade: [CoolWear] → [Profile] → [About] → [update].
User Manual
1
APP Connection
1. Turn on Bluetooth and GPS on your mobile phone. Ensure the
watch is not paired with other phone
2. Connect the Device directly with Mobile APP：APP-[CoolWear] →
[Device] → [Add device] → Tap on the searched watch name to pair
it. Do not connect watch with the phone’s Bluetooth directly.
Mobile Phone Setting
Ensure that the permission of notifications of APP in your mobile
phone is turned on: [Mobile phone] → [Settings] → [Notifications] →
[Permissions] → [CoolWear] Set all permissions to ON.
●Special Note 1: For Apple phones with operating system above iOS
12, go to [Settings] → [Bluetooth] → [Device name] → tap →
[Share system notifications] → Ensure it’s ON.
●Special Note 2: If you open an application (WeChat/Sky-
pe/WhatsApp, etc.) both on your computer and mobile phone, then no
notification message will be displayed on the watch.
2
Special Attention: Android phone will automatically clean up
infrequently used APP, causing APP to be closed in the
background. Please turn on the relevant permissions to ensure
normal use.
3
①
②
4
①②
show out this page
double click here
Watch Functions
smart watch supports a variety of functions: multiple sport modes,
weather information, watch face store, heart rate monitoring, sleep
monitoring, blood oxygen saturation monitoring, find my phone,
message notifications, and etc.
5
3.Ai Voice assistant
First please make sure the watch is connected to
the App Coolwear, and turn on the watch audio
bluetooth
Then slide from top to bottom on the home page
and tap the icon.
Now you can control your phone's voice assistant
with voice commands from your watch.
4. Change Watch Face
Method 1: Long press on the home page, then slide to switch the
watchface, click to select.
in the home page, swipe from top to bottom
Method 2: Customize the watch face and change the watch face via
the APPs watch face store: [CoolWear] → [Device] →[Watch faces]
→ [More] → [Select picture] →OK to download and change it with
the new watch face (Do not leave the download interface until the
download is 100% completed).
1.DND , setting, brightness , flash light ,bt call .
2.Screen locker , always on mode ,ai voice
control ,find phone
Function Descriptions
6
5. Step Counting: Activity data resets every day after 00:00, and you
can check the history records in the APP
6. Heart Rate Monitoring: lt measures your heart rate data. To
measure your heart rate: Turn on the heart rate monitoring function,
and after 2 seconds it will automatically measure the heart rate, then
wait for about 10-20 seconds until the measurement is completed.
Besides, if you need 24H automatic heart rate monitoring, you can
also set this function in the APP: [CoolWear] → [Device] →Turn on
[Automatic heart rate detection].
Notes:1) Ensure the sensor at the back of the watch slightly touches
the skin and the wristband not too tight or too loose.
2) lf you need to measure the exercise heart rate, please go to the
exercise mode for measurement.
7. Blood Oxygen Monitoring: lt measures your blood oxygen
saturation data. You can check the historical measurement results in
the APP's blood oxygen interface.
8. Sleep Monitoring: It records your sleep data, and you can check
the history records in the APP (Default sleep monitoring period:
20:00pm-10:00am.)
9. Weather : You need to connect the watch and CoolWear APP to
get the weather information in your location. Moreover, you can go to
[CoolWear] → [Profile] → [Unit Setting] → [Temperature] to switch
between ℃and ℉.
7
Note: The weather information displayed on the smart watch is
obtained from a third-party weather service provider. If your smart
phone and smart watch obtain weather data from different weather
service providers, then the displayed weather information may also
be different.
10.Calling funtion
Step #1：
After the Android phone connect to the
watch by App for the first time successfully,
wait for about 10 seconds, and the APP
page will pop up an audio Bluetooth pairing
request, just click to pair.
After the Iphone connected to the watch
via App successfully, it will automatically
pair the audio Bluetooth of watch.
Step #2：
Audio Bluetooth→Open
.
8
Step #3:Notes:90s after a phone call,
watch will automatically enter the
"low power consumption mode", the
button will show grey , when the
[incoming call notification] permission
in the APP is turned on, it will be
automatically activated when there is an incoming call.
11：
Music Control:
( Connect watch with app and switch to music
page) 1.watch can control the music playback on the phone and control
volume 2.Play the music via the watch speaker : Connect the audio BT
to phone setting→go to the music interface , watch speaker shall play
the music ,Please stay in the music interface, otherwise, after 90s, it will
enter the power saving mode, If you want to play again, it needs to turn
on the [Audio Bluetooth] manually again.
Step #5: Sync contact list .go to app,
in telephone directory ,and click “ + ”
to input the contacts user needs to
call in daily life then it will sync to the
watch contact list as long as app is
connected.
Step #4: after connect audio BT .
user can click the right finger pointed icon
to enter into dial page to dial phone out .
or check contact list or check call history
9
12. Multiple sport modes : Exercise data will be automatically
synchronized to the APP when connected, and you can check the
detailed data records in the sports mode in the APP.
Notes：The watch does not built with GPS.But the GPS track function
can be used in the Sport mode of app
13. Breathing Exercises: Follow the on-screen instructions for
inhalation and exhalation (Breathing exercises help relax a person’s
mood, reduce psychological stress and improve vital capacity).
14. Shutter (watch should be connected to the APP)
Method 1: In the APP: Go to [CoolWear] → [Device] → [Easy camera],
and click the shutter button to take a photo.
Method 2: On the watch: Click the shutter button on the watch’s
interface to take a photo, or shake your arm to take a photo
automatically.
15. Sedentary Reminder: Go to [CoolWear] → [Device] →
[Sedentary reminder] to enable/disable this function. If the watch
detects no enough activities or steps during the set time period, the
sedentary reminder function will be enabled, and the watch will then
remind you every one hour.
16. Alarm Function: Go to [CoolWear] → [Device] → [Alarm] to set
alarms according to your needs. Up to 5 alarms can be set (The
alarm will only give a reminder when the set time is more than 2
minutes).
Tabla de contenidos
Idiomas:
Otros manuales de Mirar de SMARTY 2.0
