Smartwares DIC-21102 Manual de usuario
Door entry
WIRED
INSTALLATION
52
DIC-211 intercom series
Instruction manual
Melody
options
Door
release
Touch
buttons
2 - way
speech
DIC-211 Series
Name
1234
5678
Name
1234
5678
EN Instruction manual..........................................................................................................4
DE Bedienungsanleitung ....................................................................................................12
FR Mode d’emploi.............................................................................................................20
NL Gebruiksaanwijzing ......................................................................................................28
ES Manual de usuario........................................................................................................36
IT Manuele utente............................................................................................................44
CS Návod na použití ..........................................................................................................52
SK Návod na obsluhu.........................................................................................................60
4EN
Name
1234
5678
WARNING
1. Please read these instructions carefully before installing and using the product.
2. Do not cut the power supply cable to extend it; the device (transformer) will not work with a longer
cable. Do not plug in the device until all the wiring has been nished.
INSTALLATION SAFETY
1. Keep children and bystanders away while installing the products. Distractions can cause you to lose
control.
2. Do not overreach when installing this product. Keep proper footing and balance at all times. This
enables better control in unexpected situations.
3. This product is not a toy. Mount it out of reach of children.
OPERATION SAFETY
1. Do not operate electrically powered products in explosive atmospheres, such as in the presence of
ammable liquids, gases, or dust. Electrically powered products create sparks which may ignite the dust
or fumes.
2. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that common
sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.
3. Do not expose the Power Adapter of this product to rain or wet conditions. Water entering the Power
Adapter will increase the risk of electric shock.
4. Do not abuse the Power Cord. Never use the cord for unplugging the plug from the outlet. Keep cord
away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
5. The adapter must match the outlet. Never modify the plug in any way. Unmodied plugs and matching
outlets will reduce risk of electric shock.
WHAT’S IN THE BOX
1. Indoor unit
2. Outdoor unit
3. Wiring
4. Adapter
5. Nameplate
6. Mounting plate
7. Screws and plugs
8. Quickstart guide
5
EN
10
7
1
2
4
5
6
8 9
3
ON
1
ON
4
1
3
2
PRODUCT OVERVIEW
INDOOR UNIT
1. Speaker
2. Unlock button
3. Internal call button
4. Intercom button
5. Mute indicator
6. Power indicator
7. Select ringtone button
8. Mute Button
9. Adjust ring volume button
10. Microphone
WHAT’S IN THE BOX?
OUTDOOR UNIT
1. Speaker
2. Call button/ Name card
3. Microphone
4. Unlock time switch
6EN
When installing the outdoor unit, make sure that the location you wish to install it is dry. It is important
that the electronics do not get wet.
1. Drill holes in the wall, insert the wall plugs in the holes. Place
the bracket and tighten the screws.
2. Connect the wires. Please pay attention to the color markings.
3. Mount the outdoor unit on the bracket. Make sure it is
properly secured.
4. Use the special security screw on the bottom of the unit, to
prevent theft.
Changing the nameplate
To change the nameplate on the outdoor unit, please push on the
call button on one side, then use a at screwdriver on the other
side to gently pull out the button. Now place the nameplate, and
replace the call button by pushing it back in.
INSTALLATION - OUTDOOR UNIT
7
EN
INSTALLATION - INDOOR UNIT
1.Select a suitable location for installation.
2. Drill holes in the wall, insert the wall plugs in the
holes. Place the bracket and tighten the screws.
3. Connect the wires. Please pay
attention to the color markings
4. Mount the indoor unit on the bracket.
Make sure it is properly secured.
5. Plug in the AC adapter after making sure all the
wires are properly connected.
8EN
Power
1
2
3
4
Indoor Unit
B, Cor D
Indoor-monitor B, Cand Dare optional, depending on how many indoor units you intend to use.
Distance between units Wiring
1–50 m 2×0,75 mm2
1–100 m 2×1,5 mm2
When running the wires, please make sure that they are not placed directly next to electrical wiring, This
could cause interference in your connection.
Testing the unit
When testing the unit, please make sure that the indoor unit and the outdoor unit are at least 10 meters
apart. If the units are to close together, you could experience a high-pitched sound and echoes.
WIRING
9
EN
ON (1) OFF (0)
ON
ON
= =
1234
ON
Bit state Description
Bit 1&2
Link indoor unit
to outdoor push
button
12
ID = (00)
For rst button outdoor unit
12
ID = (10)
For second button outdoor unit
12
ID = (01)
For third button outdoor unit
12
ID = (11)
For fourth button outdoor unit
Bit 3
Set master/slave
3ID = (0) Master
3ID = (1) Slave
Bit 4
Set door/gate
4ID = (0) Door
4ID = (1) Gate
USE
Intercom function: When in standby, when a visitor presses the call button on the outdoor
unit, the indoor unit will chime. Press the intercom button to speak to the visitor.
Internal Intercom: When in standby, press and hold the intercom button to activate the
internal intercom function. Use this to communicate between your different indoor units.
Unlocking the door: After identifying your visitor, you can press this button to unlock the
door.
Setting your ringtone: Press this button multiple times to set the melody of your choice.
Adjusting the ringtone volume: Press this button to turn up the volume.
Muting the ringtone: Press this button to mute the ringtone, for when you don’t want to
be disturbed.
10 EN
INSTALLATION
Extra indoor-monitors are optional, depending on how many indoor units you intend to use.
red
red
red
red
black
black
black
black
Outdoor
unit
Indoor
unit
Indoor
unit
Indoor
unit
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Sistema de intercomunicación de Smartwares
Smartwares
Smartwares DIC-22815 Manual de usuario
Smartwares
Smartwares VD36W Manual de usuario
Smartwares
Smartwares DIC-222 Series Manual de usuario
Smartwares
Smartwares VD36W Manual de usuario
Smartwares
Smartwares DIC-211 Series Manual de usuario
Smartwares
Smartwares VD38W Manual de usuario
Smartwares
Smartwares DIC-221 series Manual de usuario
Smartwares
Smartwares DIC-224 Series Manual de usuario
Smartwares
Smartwares DIC-22815 Manual de usuario
Smartwares
Smartwares VD38W Manual de usuario
Smartwares
Smartwares DIC-222 Series Manual de usuario
Smartwares
Smartwares DIC-222 Series Manual de usuario
Smartwares
Smartwares DIC-221 series Manual de usuario
Smartwares
Smartwares DIC-211 Series Manual de usuario
Smartwares
Smartwares DIC-24112 Manual de usuario
Smartwares
Smartwares VD36W Manual de usuario
