SmartPro Aura Manual de usuario
1
USER’S MANUAL v2.2
SmartPro Aura
Synthetic Diamond Scanner
2
CONTENTS
I. DISCLAIMERS, EXCLUSIONS, AND LIMITATIONS OF LIABILITY…..p. 3
II. ABOUT SMARTPRO AURA……………………………………………… p. 3
III. FEATURES AND ADVANTAGES……………………………………….. p. 4
IV. PRODUCT SPECIFICATIONS…………………………………………… p. 4
V. TESTER OVERVIEW……………………………………………………… p. 5
VI. ACCESSORIES……………………………………………………………. p. 8
VII. POWERING DEVICE……………………………………………………… p. 9
VIII. TESTER LIGHT INDICATORS…………………………………………… p. 10
IX. CONTROL SETTINGS…………………………………………………….. p. 11
X. TESTING / DETECTION………………………………………………….. p. 12
XI. TEST RESULTS AND IMAGE PREVIEW ….…………………...……... p. 15
XII. TEST CERTIFICATE……………………………………………………… p. 19
XIII. SHARING IMAGES / TEST CERTIFICATE…………………………….. p. 21
XIV. PRINTING IMAGES / TEST CERTIFICATE……………………………. p. 21
XV. IMAGE / FOLDER GALLERY……………………………………………. p. 22
XVI. MAIN SETTINGS………………………………………………………….. p. 24
XVII. SAFE HANDLING / MAINTENANCE……………………………………. p. 25
XVIII. TROUBLESHOOTING ……….…………………………………………… p. 25
XIX. TESTER THUMBSCREW ASSEMBLY …………………………………..p. 26
3
I. DISCLAIMERS, EXCLUSIONS, AND LIMITATIONS OF LIABILITY
Please read and note SMARTPRO WARRANTY TERMS AND CONDITIONS
as stated in the warranty card. SmartPro warranty for its subject to proper use
by its user following all the terms and conditions as stated in the relevant user
manual and shall cover only manufacturing defects.
Due to continuous product improvement, SmartPro reserves the right to
revise all documents including the right to make changes to the user manual
without notice and without obligation to notify any person of such revisions or
changes. Users are advised to check SmartPro’s website
http://www.smartproinstrument.com.
SmartPro shall not be responsible for any damage or loss resulting from the
use of the product or user manual, and under no circumstances shall
SmartPro, its manufacturer or any of its subsidiaries, licensors, distributors,
resellers, servants and/or agents be liable for any direct or indirect damages
resulting from the use of this product.
To the maximum extent permitted by applicable law, under no circumstances
shall SmartPro, its manufacturer or any of its subsidiaries, licensors,
distributors, resellers, servants and/or agents be liable for any special,
incidental, consequential or indirect damages howsoever caused.
Smartpro Aura referred to in this user manual is provided and/or sold on the
“as is” basis. Except as required by applicable law, no warranties of any kind,
expressed or implied, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
II. ABOUT SMARTPRO AURA
Congratulations on having our SmartPro Aura (SPAU). The first Synthetic
Diamond Screener that can screen automatically for mounted jewelry and
can also be used to test loose stones with various test results such as
Natural Diamond, CVD Synthetic Diamond, and HPHT Synthetic
Diamond. This smartest Screener has unique features to show the
4
estimated diameter size (mm) and counting of each loose stones being
tested, plus auto-generating test certificate results.
III. FEATURES AND ADVANTAGES
1. FEATURES
Able to test Mounted Jewelry and loose stones
Able to Detect as small as 0.002 ct. stones
Built-in high-end Smartphone with high camera resolution
Low current consumption
360-degree view for Rings and Jewelry
Test Result Sharing by email
Manual View Available to Manually observe stones on UV
Auto Detection Mode View
Able to test stones inside a transparent plastic bag for bulk testing
2. ADVANTAGES
Automated test results
Able to separate CVD from HPHT (Separated Mode)
Detected Stones Auto-counting (Separated Mode)
Estimated Stone diameter measurement (Separated Mode)
Two-view Test Results
Auto-generated test result certification
No External Computer / Screen
IV. PRODUCT SPECIFICATIONS
Stones Testing Capabilities
Natural Diamond
CVD Synthetic Diamond
HPHT Synthetic Diamond
Stone Colors (capable to detect)
Colorless to Near Colorless (D-K)
Stone Size (capable to detect)
0.002 carat and above
Estimated Maximum Count of Stones per test:
576 loose stones (9 pcs of 0.002 ct per block)
Time Duration per test
17 secs. for Loose or Jewelry on Tray detection
93 secs. for 360 detections (total of 4 tests)
Loose Stone Tray Size (camera view)
64 x 64 mm
Tester Body Dimensions
230 x 301.5 mm
Tester Weight
Approx. 5.0 Kg
5
A. Aura Carrying Bag
B. Smartpro Aura Tester
C. AC Power Cable
D. Loose Stone Tray 1 (SPABST)
E. Loose Stone Tray 2 (SPALST)
F. Jewelry Tray
G. Ring Attachment 20mm
H. Ring Attachment 25mm
I. Bracelet Attachment 55mm
J. Bracelet Attachment 65mm
K. Tester User’s Manual
L. Warranty Certificate Card
M. International Warranty
Card
A
B
C
D
E
G
H
I
J
K
L
M
F
Body Color
Red with Black
Power Supply
100-240 VAC, 1.4A
Power Fuse
3A
Power Cable Type
IEC C13
Screen Device
Samsung S9+
Lamp Life
Approximately 675,000 tests
Operating System
Android
Screen Size
6.2 Inches (157.48mm)
Screen Resolution
1440 x 2960
Device Memory
6GB RAM, 64GB
Mobile Battery
Auto-charging
Ventilation Requirements
Do not obstruct the ventilation holes
V. TESTER OVERVIEW
1. Tester Parts and Accessories
6
2. Tester Overview
7
3. Mobile Screen Overview
Mobile
Temperature
Indicator
Mobile
Camera View
Controls
Gallery of Saved
Detection
Results
Test Button
Main Settings
Back Button
Important Info
8
VI. ACCESSORIES
1. Loose Stone Tray –view size: 64 x 64 mm
2. Ring / Jewelry Tray - 10 slots for ring and earrings.
For Bulk Stones / Stones inside Transparent Plastic
Tray Code: SPABST
Ring and Earing
slots
Camera view
For Big and Separated Stones
Tray Code: SPALST
9
3. Jewelry Attachment (for 360 views)
i. Ring attachment with 20mm and 25mm diameter
ii. Bracelet attachment with 55mm and 65mm diameter
VII. POWERING DEVICE
1. Turning ON the AURA Box.
i. Connect the Power Cable into the Inlet Power Socket at the backside
of AURA and the other end of cable plug to the Power Outlet.
ii. Switch ON the Inlet Power Switch.
10
2. Turning ON the built-in mobile.
Click and hold the Mobile Switch at the
right side of AURA until the mobile
screen opens.
Note: Mobile is blocked to other
applications so that the Smartpro
Application will run smoothly without any
error/bugs.
VIII. TESTER LIGHT INDICATORS
1. UV Lamp Indicator
i. No light –indicates that the UV Lamp is turned OFF.
ii. Blue light –indicates that the UV Lamp is turned ON.
Note: UV lamp will automatically turn OFF when the Door
opens.
2. Door Indicator
i. No light –indicates that the door of the tester is fully
closed.
ii. Red light –indicates that the door of the tester is
opened.
3. Power Indicator
i. No light –indicates that the tester is switched OFF.
ii. Blinking Green light –indicates that the tester is turned
ON but it is not yet connected to the mobile phone.
iii. Stable Green light –indicates the tester is turned ON
and ready to use.
Otros manuales para Aura
2
Tabla de contenidos
Otros manuales de Escáner de SmartPro
