Smarti HD Vehicle Accident Camera Manual de usuario
Drive
Video
HD Vehicle Accident Camera
User Manual
Version 1
HD
Supports
up to 32GB Night
Operation
16.9
1.5” LCD
Screen
2.0
USB
Windows
Compatible Mac and Windows
Compatible
Built-in
Microphone
Video
1920x1080
Video
1280x720
Contents
1. Product Overview ............................................................................ 3
1.1. Product Features ................................................................ 3
1.2. What’s In The Box ............................................................... 3
1.3. Button Functions ................................................................. 4
1.4. Installation ........................................................................... 5
1.5. Basic Operation .................................................................. 6
2. OSD Menu ........................................................................................ 7
2.1. Menu .................................................................................. 8
2.2. Video Settings .................................................................... 8
2.2.1. Movie Size ........................................................... 8
2.2.2. Date Stamp .......................................................... 8
2.2.3. Motion Detection .................................................. 9
2.2.4. Loop Recording ................................................... 9
2.2.5. Loop Time ............................................................ 10
2.2.6. Continue .............................................................. 10
2.2.7. Video Sound ........................................................ 10
2.3. Picture Settings .................................................................. 11
2.3.1. Resolution ............................................................ 11
2.3.2. Quality .................................................................. 11
2.3.3. Exposure .............................................................. 12
2.3.4. Driver Mode ......................................................... 12
2.3.5. Date Stamp .......................................................... 12
2.4. General Settings ................................................................. 13
2.4.1. Sounds ................................................................. 13
2.4.2. Power Frequency ................................................. 14
2.4.3. Power Save ......................................................... 14
2.4.4. Panel Protect ....................................................... 14
2.4.5. Date / Time .......................................................... 15
2.4.6. Language ............................................................. 15
2.4.7. Start-up Image ..................................................... 15
2.4.8. Format ................................................................. 16
2.4.9. LED Light ............................................................. 16
2.4.10. Reset All ............................................................. 16
2.4.11. Version ............................................................... 17
3. Recording & Playback .................................................................... 18
3.1. Video Recording ................................................................. 18
3.1.1 Manual Recording ................................................. 18
3.1.2 LED Recording ..................................................... 18
3.1.3 Auto Recording ..................................................... 18
3.2. Snapshot Mode .................................................................. 18
3.3 Audio Recording .................................................................. 19
3.4 Playback .............................................................................. 19
3.4.1 Video Playback ..................................................... 19
3.4.2 Photo Browsing ..................................................... 20
3.4.3 Audio Playback ..................................................... 20
4. Connect to a Computer .................................................................. 21
4.1. Mobile HDD Mode .............................................................. 21
4.2. PC Camera Mode ............................................................... 21
4. Specifications .................................................................................. 22
Thank you for purchasing the Smart-i Drive Accident Camera from Smart-i.
The Smart-i Drive records road events in HD (720P) to help drivers provide clear evidence of
what really happened and help protect against false claims.
The recorder is equipped with motion detection recording as well as snapshot recording.
The Smart-i range of Vehicle Accident Cameras are designed to offer crystal clear images and
represent amazing value for money.
1.1 Product Features
Supports 720P recording
Built-in Microphone / Speaker
Quick Recording Open / Close Choice
Supports up to 32GB Micro SD Card
Recorder charges while in recording function
and the video loop offers seamless video
coverage
3
1. Product Overview
1.2 What’s in the Box
Smart-i Drive Vehicle Accident Camera
1x Suction Windscreen Mount
1x Car Charger
1x User Manual
1x USB Cable
Supports
up to 32GB
Night
Operation
16.9
1.5” LCD
Screen
2.0
USB
Windows
Compatible
Mac and Windows
Compatible
Built-in
Microphone
Video
1920x1080
Video
1280x720
1.3 Button Functions
1 24
5
6
7
8
9
10
1. Power Off / On Button
2. OK: Confirm key. Execution key for photograph / video recording / audio recording.
3. Reset Button
4. USB Port
5. Right Direction Key
6. Left Direction Key
7. Menu: Open Up Sub-Menu
8. Mode: Mode switch, toggle between photo, video and audio recording. Also press
for file playback mode.
9. Speaker / Microphone
10. LED
11. Micro SD Card Slot
3
11
4
1.4 Installation
5
To Install the Smart-i Drive in your car, please follow the steps below:
1. Firstly, take out the Smart-i Drive and the Windscreen Mount.
2. Attach the Windscreen Mount to the unit.
4. Position the Smart-i Drive at the front of the car. Please note that the recorder should be
placed in behind the rear view mirror to comply with regulations.
3. Insert the Micro SD Card (if purchased) into the unit. To insert, place the card in the slot
(shown below) until you hear a slight click sound confirming the card has been placed
successfully.
5. Take the ‘Car Charger’ out of the box.
6. Connect the USB end of the car charger to the Smart-i Drive and the other end to the Cigarette
Lighter Power Socket in your vehicle.
7. Turn on the ignition to power the unit.
8. Finally, press the ‘Power On’ to turn the unit on.
1.5 Basic Operation
Power On / Off
Before powering on the recorder, please insert the Micro SD Card. Insert the Micro SD Card into
the slot until there is a slight ‘click’ sound, which means the card has been successfully installed.
Power On
Manual - Press the power on / off button, to turn the recorder on.
Auto - When connected to a working power adaptor, the recorder will automatically turn on. If
a Micro SD Card has already been installed, the recorder will automatically begin
recording.
Power Off
Manual - Press and hold the power On / Off button.
Battery
6
Please note the Smart-I Drive requires power all the time to be able to function.
When not powered the unit’s built in battery will last enough time to close the last recording safely.
2 OSD Menu
System
Settings
Video
Resolution
HD (1280x720) D1 (848x480) 640 (640x480)
Date Stamp
O / On
Sounds
On / O
Power
Frequency
50 Hz / 60 Hz
Power Save O / 1 Min / 3 Min / 5 Min
Panel Protect O / 30 Sec / 1 Min / 2 Min
Language 12 Languages
Start-up
Image
O / System / My Image
Format Yes / No
Version View Version Information
Video
General
Motion
Detection
O / On
Loop Record
O / On
Loop Time
2 / 5 / 10 Minutes
Date & Time Set Date & Time
LED Light
On / O
Reset All On / O
Continue
O / 5 / 10 Minutes
Video Sound
On / O
Shutter
O / (Choose from 3 Sounds)
Start Up
On / O
Beep
0 -3
Volume
7
Resolution
5 Megapixel, 3 M, 2 M, 1 M
Quality
Super Fine, Fine, Normal
Exposure
-2.0 ~ +2.0
Driver Mode
O / Self Timer 2 Sec, Self Timer 10 Sec, Burst
Date Stamp
On / O
Picture
2.1 Menu
To enter into the system settings, press the ‘Menu’ button when in video mode. There are 2 menu
options that you can choose to adjust, video and general settings. To switch between the 2 menus,
press the ‘Mode’ button and then use the arrow buttons to choose between the menu options.
Alternatively, to enter into the picture mode menu, press the ‘Mode’ key when the unit is on. This
will enter into the ‘Picture’ mode, then press the ‘Menu’ key.
To enter into the video settings, press the ‘Menu’ button when the unit is in video mode. To
navigate between menu options, use the arrow key then press ‘OK’ to enter into that option.
Once you have adjusted the settings, press the ‘OK’ button to confirm.
2.2 Video Settings
2.2.1 Movie Size
This option allows you to choose the video resolution. You can choose between:
HD (1280x720)
D1 (848x480)
640 (640x480)
Please Note: The higher the definition of the video, the larger the video file size will be.
8
2.2.2 Date Stamp
2.2.3 Motion Detection
By turning this function on, when a moving object is detected and the recorder will begin to
record. If the object stops moving the recorder will stop, and begin again once the same object
moves again.
2.2.4 Loop Recording
This option allows the user to turn on the loop recording function. To adjust the loop recording
times, go to the ‘Loop Time’ section (2.2.5) on page 10.
9
The date stamp option allows you to add the time and date on the screen of the recorded videos.
To adjust the time and date, go to section 2.4.5 on page 15.
2.2.5 Loop Time
2.2.7 Video Sound
This option allows you to record sound as well as video via the microphone on the front of the
recorder.
10
This option allows you to change the video sizes when in loop record. By turning on this function,
the unit will record for either 2, 5 or 10 minutes and then start a new video recording file.
2.2.6 Continue
Turn on the continue function to enable the recorder to continue to record after the ignition has
been switched off. This can be set to record 5 minutes or 10 minutes after the engine turns off.
Tabla de contenidos
Otros manuales de Cámara de salpicadero de Smarti
